Articulating arm ROCKY with 2-step central clamp, with 1/4" thread and cold shoe adapter L. 150 mm, weight 158 gr., payload 3 kg. The central clamp first fixes the articulation and second the ball pivot. The 90° slot is rotating and can be fixed.
Bridge Plate with Ø19mm rods, L= 440mm, for Sony F23, F35, F55, F65, Phantom Flex and with LWS as adaptor for Red Epic / Scarlet, Canon EOS C Series and other
CDM-MK-Z2 - compact control-unit for Fujinon Zoom MK 18-55, 50-135mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. Incl. 1x digital servo-motor-unit, 1x LANC cable, 1x LANC extension cable, 1 x MN-AB (powercable 12 Volt A/B D-Tap 0B 5pin), 1x Allen Key, 1x Mini-USB-adapter.DESIGNED FOR FUJINON MK 18-55MM T2.9 & FUJINON MK 50-135MM T2.9
CONTROLLED VIA SONY FS & LANC HANDGRIP
Control directly the zoom servo drive via optically de-coupled LANC sockets and Sony FS5 / FS7 handgrip zoom rocker. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip.
CAMERA CONTROL SIGNALS FORWARDED
Control signals (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera.
SINGLE UNIT MOUNTED ONTO LENS
Two captive screws keeping the single servo drive unit permanently fixed onto lens.
4 ZOOM MODES
1st EB / Documentary, 2nd Live / Hardcut, 3rd Silent, 4th Direct Mode
Chrosziel further expands its successful CDM Zoom Servo Drive family
The FR7 zoom motor unit CDM-SFR fits seamlessly into the operating
functions of the Sony PTZ ILME-FR7 camera.
The FR7 Zoom Servo Drive is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on the 15mm rods of the Sony PTZ head. The servo drive is controlled via the Option port of the Sony ILME-FR7. The motor control can be addressed via Sony's camera-specific protocol and therefore can be used seamlessly with the whole ecosystem of the Sony FR7.Due to the included Chrosziel Flexi toothed ring (#206-30), the CDM-SFR can be used with almost any zoom lens even without standard cine gearing.
This opens up a complete new range of lenses to cover the creatives needs from wide angle lenses to long-zoom operation.The FR7 Zoom servo drive unit is slid onto the 15mm rod and swiveled onto the zoom lens. The curly cables ensure safe operation within the full tilt and pan range of the Sony ILME-FR7. The tiny distribution box is mounted to the side of the FR7 base and has a built-in power input. Simply unplug the power supply of the FR7 and plug it into the distribution box. Then plug the power plug of the distribution box into the power input of the Sony FR7. Connect the RJ45 connector of the distribution box into the OPTION port of the cameras base unit (do not connect to the Ethernet port since you need this for the ILME-FR7 communication). Done.FEATURESUniversal zoom motor
The CDM-SFR is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on the 15mm rod.
Controlled via Sony ILME-FR7
The Sony ILME-FR7 base unit controls directly the servo drive unit. What ever remote panel or web access you use to control the Sony ILME-FR7, the zoom motor will receive its signal directly from the base unit of the FR7.No extra cables or power supply neededThe CDM-SFR inherits all cables, clamps, distribution box and plugs to use it right out of the box with the Sony ILME-FR7. No extra power supply needed.
Technical dataPower IN 19.5V (Sony ILME-FR7 power supply used)
Power OUT (Sony ILME-FR7 power plug, same voltage as power in passed through)RJ45 plug (control command In (OPTION port))
Torque 0.5Nm
Power consumption max. approx. 10Wproduct code CDM-SFR EAN/GTIN number: 4250618848648
IN THE BOX
1x CDM-SFR Digital motor unit
1x 206-30 Flexi Gear Ring (Ø 60-120mm)
1x Gear Drive, mod. 0.8 (Ø 30mm)
CDM-MK-Z2 - servo drive unit for Fujinon Zoom XK 20-120mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. ZOOM SERVO DRIVE FOR FUJINON XK ZOOM LENS: CDM-XK-Z
MOTORIZE YOUR FUJINON XK6X20 20-120MM T3.5 WITH CHROSZIEL
SINGLE UNIT MOUNTED ONTO LENSTwo captive screws keeping the single servo drive unit permanently fixed onto lens.CONTROLLED VIA SONY FS & LANC HANDGRIPThe Sony FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip.CAMERA CONTROL SIGNALS FORWARDEDControl signals (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera.4 ZOOM MODESEB / Documentary, Live / Hardcut, Silent, Direct Mode_________________________________________________________________All in one single housing
Developed for the Fujinon XK6x20 20-120 mm zoom lens the CDM-XK-Z enables ways of creativity that may be impossible just by zooming manually. To simplify the operator’s workflow the zoom servo drive is directly mounted onto the lens by two captive screws.
The weight of the CDM-XK-Z including digital motor, gear, PCB with CPU, screws and cabling is 0.44 lbs. (197 gram). With the zoom servo drive Chrosziel addresses camera operators who are working in the broadcast and documentary sector looking for a reasonably priced zoom servo drive.
_____________________________________________________All camera control signals forwarded
Control commands (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera via the LANC protocol.
By using a Sony PXW-FS5 or a Sony PXW-FS7 camera with a SWIT battery a D-Tap to a (straight or angled) Lemo compatible 5-Pin power cable is used (Chrosziel order numbers: MN-AB-A with angled Lemo compatible socket / MN-AB with straight Lemo compatible socket). The two Jack-Jack cables are forwarding the control commands from the hand grip.
If e.g. a Panasonic Varicam, Sony PMW-F5 or Sony PMW-F55 are used a combined cable with power and start / stop is required, like a Hirose 4-Pin to a (straight or angled) Lemo compatible 5-Pin cable (Chrosziel order numbers: F55-A2-PCAM-A with angled Lemo socket / F55-A2-PCAM with straight Lemo compatible socket). Also, the two Jack-Jack cables are forwarding the control commands from the hand grip.
Also, Chrosziel offers a variety of power cables with straight and angled plugs for all types of camera power out sockets and batteries including camera run / stop functionality.
_____________________________________________________Chrosziel CDM-XK-Z Zoom Servo Motor: zoom modes
For freedom of creativity the operator may choose from four different zoom modes: EB / Documentary Mode, Live / Hardcut Mode, Silent, and Direct Mode.
EB / Documentary ModeDesigned for long and smooth zoom drives with the CDM-LWZ3-Z it offers slow creeping zoom transitions while keeping the motive perfectly framed.Silent ModeTo reduce the sound of the zoom servo drive the maximum speed of its motor is limited to 40 percent making the setup almost inaudible.Live / Hardcut ModeTo catch the best moments, the Live / Hardcut Mode is useful. It uses 80 percent of the maximum speed capacity of the motor offering fast zoom drives but with Soft Ramping.Direct ModeThe Direct Mode finally uses the full speed capacity of the Zoom Servo Drive. The LANC commands are implemented instantaneously without ramping and smooth transitions. Useful for B camera operators catching snaps shots from the concert.______________________________________________________________How to change zoom modes
You can choose the different modes by pressing the zoom rocker for round about 25 seconds, then the green LED flashes very fast while changing the zoom mode and after that it blinks 1, 2, 3 or 4 times* – depends on the zoom mode you chose (* 1 = EB / Documentary / 2 = Silent / 3 = Live / Hard Cut / 4 = Direct). To cycle through these all you need to do is hold the zoom rocker down one way for a couple of seconds to switch to the next mode, and the other way, hold to reverse.
Adjustable Cable Ties With Multiple Mounts.One of the little things that makes life easier on setSet with 12 pcs "Chaos Cable Ties"4x 1/4" thread4x 3/8" thread 4x stickytapeOrganize your cables on your camera set with our Chaos Cable Ties. These adjustable, reusable ties are great for managing cable on set. they also reduce cable strain as they keep the cable from sliding through unlike other ties. The set comes with 4 ties that have a 3/8th thread and 4 that have 1/4-20 thread to attached to cages and organize cables around the camera they way you want. Because of the thread, you can use them again and again. No threaded mount points available? Chrosziel has you covered with 4 adhesive Chaos Cable Ties in the set.
401-BUR-ADV-KIT: THE COMPLETE LWS CAGE FOR THE SONY BURANOThe Chrosziel Advance Cage Kit fitted for the Sony Burano is a slim, lightweight yet sturdy cage that allows access to all camera controls and ports while adding dozens of mounting points for essential gear and accessories the camera needs for filming. The Advanced cage kit is perfect for run-n-gun shooting, live event broadcasting or tripod mounted studio work.
Fitted LWS Baseplate with VCT mount, shoulder pad and 15mm rod mounts, a pair of 20 cm rods in is included Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points and a pair of 9cm rods included. Top plate has removeable center so FX9 handle with built in electronics can be used Right and Left front side brackets with more mounting points Rear right side bracket that secures to the top plate and the camera with 2 extra screws to support heavier accessories
The 401-BUR-ADV-KIT Chorsziel Cage Consists of: 1x 401-VEN LWS base plate with integrated shoulder pad 1x 401-BUR-TOP Top plate with 15mm rods 1x 401-BUR-SBF Front side bracket right 1x 401-BUR-SBL Front side bracket Left 1x 401-BUR-SBR Rear side bracket
Chrosziel Cine Bridge Plate Kit for Sony Venice 2 consists of: Top Bridge 401-VEN-BRI, Bridge plate 401-121-02, cage brackets left and right, and top plate.
Chrosziel Front-Side-Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8". The front-side-plate is attached to the Chrosziel top plate (401-BUR-TOP) and to the light weight support (401-VEN) or bridge plate (401-VEN-BRI).401-BUR-SBF: THE SONY Burano Front Side BracketThe Front Side Bracket comes with numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard. It is mounted with two screws into the Chrosziel 401-BUR-TOP top plate and additionally into the two threading of the Chrosziel Light Weight Support 401-VEN or Chrosziel Bridge Plate 401-VEN-BRI.
Front Side Bracket for Sony Burano, with integrated mounting points
1/4" and 3/8" threads
mounted on the Chrosziel 401-BUR-TOP top plate and the two threading of the Chrosziel 401-VEN or 401-VEN-BRI
Chrosziel QuickLock VCT Tripod Plate for cameras with V-mount, fully adjustable 3/8" + 1/4" mount threads. Ultra-lightweight made of aircraft-grade aluminium, quiet, low-noise locking mechanism, play-free mounting of the camera by push and pull release/lock lever. (replaces 401-130)FEATRURESSecure, Play-Free Camera MountingLow-Noise Locking Mechanism
For all cameras with V Mount
Play-Free mounting on the Tripod PlateThe QuickLock Plate 401-150 locking mechanism consists of three parts: movable unlocking bolt at the front,fork-shaped locking slide in the middleretractable locking bolt at the rearTo attach a camera with V-mount adapter to the QuickLock Plate, push it into the V-shaped notch on the front and pull the locking lever to the right. The following happens: Unlocking bolt and locking slide move forwards / left, the locking bolt downwards.
Compared to average standard Quick Release Plates or VCT Tripod Plates (mostly without retractable locking bolts), the Chrosziel locking mechanism with retractable locking bolt has play-freely clamps to secure even worn out rear mounting mechanisms located on the bottom of the camera.
For cine cameras equipped only with tripod screw threads at the bottom , a Chrosziel lightweight support (such as 401-EVA1) enables mounting the camera security to the quick release plate. For ENG cameras, rod support can be added via a Chrosziel lightweight support (like 401-50 for Sony) in combination with the QuickLock Plate.
Chrosziel Rear-Side-Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8". The rear-side-plate is attached to the Chrosziel top plate (401-BUR-TOP) and to the body-owned two threadings.401-BUR-SBR: THE SONY Burano Rear Side BracketThe Rear Side Bracket comes with numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard. It is mounted with two screws into the Chrosziel 401-BUR-TOP top plate and additionally into the two threading of the Sony Burano camera body.
Rear Side Bracket for Sony Burano, with integrated mounting points
1/4" and 3/8" threads
mounted on the Chrosziel 401-BUR-TOP top plate and the two threading of the Sony Burano camera body
401-BUR-STD-KIT: THE LWS RUN-N-GUN CAGE FOR THE SONY BURANOThe Chrosziel Standard Cage Kit fitted for the Sony Burano is a slim, lightweight yet sturdy cage that allows access to all camera controls and ports while adding dozens of mounting points for essential gear and accessories the camera needs for filming. The Advanced cage kit is perfect for run-n-gun shooting, live event broadcasting hand-held or tripod mounted.
Fitted LWS Baseplate with VCT mount, shoulder pad and 15mm rod mounts, a pair of 20 cm rods in is included Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points and a pair of 9cm rods included. Top plate has removeable center so FX9 handle with built in electronics can be used
The 401-BUR-ADV-KIT Chorsziel Cage Consists of: 1x 401-VEN LWS base plate with integrated shoulder pad 1x 401-BUR-TOP Top plate with 15mm rods
Chrosziel Top-Plate for Sony Burano, built-in Ø15mm rod support, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm / 3.55inch with internal thread (extendable). The top-plate is split into two parts allowing the use of either the standard Sony Burano Top Handle or the Sony FX9 Top Handle with built-in electronics for maximum Run&Gun shooting.401-BUR-TOP: THE CHERRY ON THE SONY Burano “CAKE”The Top Plate comes with rod support in standard optical height, numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard and an optical marker for attaching a measuring tape. Additionally the top plate inherits various mounting points to move the Sony Burano cable clamps to the desired position.
Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points
1/4" and 3/8", pair of Ø15mm rods - 9cm /3.55inch with internal thread (extendable)
top-plate split into two parts for the standard Sony Burano Top Handle or the Sony FX9 Top Handle with built-in electronics
The Chrosziel C-412-02F Wide-Angle Lens Sunshade is a 16:9 / 4:3 104mm clamp-on sunshade designed to work with select wide-angle lenses that feature a focal length down to 16mm in Full Frame or 4.3mm n 2/3 sensor cameras. With a 104mm clamping back, the sunshade reduces glare which helps eliminate lens flares. Two filter stages are included, one 4 x 4" / 4 x 5.65" and the rotating rear stage which accommodates 5 x 5" / 4 x 5.65" filters.Side Wings are available separately for even greater light control. What's in the Box: Compact SunShade 4:3 /16:9 F4.5, with housing CLWAH-F4.5French Flag, Filter Stage CF-SS/F4.52 Filterholder - 1x fixed multi-format 4x4/4x5.650 (410-31) and 1x rotatable multi-format 5x5/4x5.650 (510-01)Clamp Adaptor Ø104 mm
The Chrosziel 412-02F110 Wide-Angle Lens Sunshade is a 16:9 / 4:3 110mm clamp-on sunshade designed to work with select wide-angle lenses that feature a focal length down to 16mm in Full Frame lenses or 4.3mm in 2/3 sensor lenses. With a 110mm clamping back, the sunshade reduces glare which helps eliminate lens flares. Two filter stages are included, one 4 x 4" / 4 x 5.65" and the rotating rear stage which accommodates 5 x 5" / 4 x 5.65" filters.Side Wings are available separately for even greater lighting control. What's in the Box: Compact SunShade 4:3/16:9 F4.5 = CLWAH-F4.5French Flag + CF-SS/1102 Filter holders 1x fixed multiformat 4x4/4x5.650 (410-31) a. 1x rotatable multi-format 5x5/4x5.650 (510-01)Clamp Adaptor Ø110 mm
The Chrosziel 412-02F130 Sunshade is a lightweight 16:9/4:3 130mm clamp-on sunshade designed to work with select full frame lenses down to 16mm and 2/3" lenses that have focal lengths down to 4.3mm. The sunshade reduces glare which helps eliminate lens flares. This sunshade includes a top French flag. Side Wings are available as an optional accessory for even greater lighting control. Additionally, the kit includes two filter stages (one fixed, one rotating) with trays that are capable of holding square filters. The front filter stage holds 4 x 5.65" & 4 x 4" filters, and the rear rotating stage holds 5 x 5" and 4 x 5.65" filters.Note:
Requires step-down rings – use the 412 series for a 130mm clamping back.What's in the Box: Compact Sunshade 4:3/16:9 F4.5 = CLWAH-F4.5French Flag + CF-SS/1302 Filter holders 1x fixed multiformat 4x4/4x5.650 (410-31) a. 1x rotatable multi-format 5x5/4x5.650 (510-01)Clamp Adaptor Ø130 mm
DSLR/Mirrorless Shoulder Kit Comfort, consisting of 401-453 Light Weight Support 15 HD for DSLR 403-20L Handle Bar proVideo plus w. lever 3050 MultiPad 15 Shoulder Support 3300 Carrying Handle for DSLR cameras
DV StudioRig follow focus with gear drive 0.8 (206-12 and FlexiGearRing (206-30), scale (205-02), for one-side-operation. For lens diameters up to 110 mm.
€896.00*
This website uses cookies to ensure the best experience possible. More information...