Go to homepage

Canon

Canon


Filter
Base plate for bridge plate
Base plate for bridge plate
Base plate for bridge plate Base plate (l. 290mm, 11 inch) for bridge plate unit
Bridge Plate DigiCine, Ø19mm
Bridge Plate DigiCine, Ø19mm
Bridge Plate DigiCine, Ø19mm Bridge Plate with Ø19mm rods, L= 440mm, for Sony F23, F35, F55, F65, Phantom Flex and with LWS as adaptor for Red Epic / Scarlet, Canon EOS C Series and other
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods Bridge Plate incl. Ø19mm Rods, l. 440mm (for combination with QuickLock Tripod Plates 401-120/401-130 )
Cage for Canon EOS C70
Cage for Canon EOS C70
Cage for Canon EOS C70 Cage for Canon EOS C70, with 3/8" and 1/4" anti-twist threads.
Canon C700 Extension Cable for use with Chrosziel 403-40
Canon C700 Extension Cable for use with Chrosziel 403-40 Extension Cable for Canon C700 and C500 when used with Chrosziel Handgrip Extension 403-40, L. 300mm
Chaos Cable Ties
Chaos Cable Ties
Chaos Cable Ties Adjustable Cable Ties With Multiple Mounts.One of the little things that makes life easier on setSet with 12 pcs "Chaos Cable Ties"4x 1/4" thread4x 3/8" thread 4x stickytapeOrganize your cables on your camera set with our Chaos Cable Ties. These adjustable, reusable ties are great for managing cable on set. they also reduce cable strain as they keep the cable from sliding through unlike other ties.  The set comes with 4 ties that have a 3/8th thread and 4 that have 1/4-20 thread to attached to cages and organize cables around the camera they way you want. Because of the thread, you can use them again and again. No threaded mount points available? Chrosziel has you covered with 4 adhesive Chaos Cable Ties in the set. 
Chrosziel QuickLock V-Mount Tripod Plate
Chrosziel QuickLock V-Mount Tripod Plate
Chrosziel QuickLock V-Mount Tripod Plate Chrosziel QuickLock VCT Tripod Plate for cameras with V-mount, fully adjustable 3/8" + 1/4" mount threads. Ultra-lightweight made of aircraft-grade aluminium, quiet, low-noise locking mechanism, play-free mounting of the camera by push and pull release/lock lever.  (replaces 401-130)FEATRURESSecure, Play-Free Camera MountingLow-Noise Locking Mechanism For all cameras with V Mount Play-Free mounting on the Tripod PlateThe  QuickLock Plate 401-150 locking mechanism consists of three parts: movable unlocking bolt at the front,fork-shaped locking slide in the middleretractable locking bolt at the rearTo attach a camera with V-mount adapter to the QuickLock Plate, push it into the V-shaped notch on the front and pull the locking lever to the right. The following happens: Unlocking bolt  and locking slide  move forwards / left, the locking bolt downwards. Compared to average standard Quick Release Plates or VCT Tripod Plates (mostly without retractable locking bolts), the Chrosziel locking mechanism with retractable locking bolt has play-freely clamps to secure even worn out rear mounting mechanisms located on the bottom of the camera. For cine cameras equipped only with tripod screw threads at the bottom , a Chrosziel lightweight support (such as 401-EVA1) enables mounting the camera security to the quick release plate. For ENG cameras, rod support can be added via a Chrosziel lightweight support (like 401-50 for Sony) in combination with the QuickLock Plate.
Clamp-On CINE.1 MatteBox MB 565 Double
Clamp-On CINE.1 MatteBox MB 565 Double
Clamp-On CINE.1 MatteBox MB 565 Double The completely modular Cine.1 Matte Box from Chrosziel is built to be strong yet lightweight to fit into your handheld or studio camera rig. Having a matte box on the front of your lens allows you more flexilbility in lighting your scene by blocking light sources just out of frame from directly entering the lens, which can cause the lens to flare, and introduce image artifacts. This particular iteration of the Cine.1 series can be mounted directly on the lens with the integrated clamp, and is configured with two filter stages, however, it can be configured to hold either one or three filters with addition or removal of filter stages.What's in the Box: CINE.1 MatteBox MB 565 Double, for Cine Full Frame camerasClamp adapter with Ø 150mm 501-26French Flag 501-062 Filterholders multiformat 5.65x5.65/ 4x5.650, each independently 360°rotating
Combined cable Power and LANC Start/Stop for Broadcast Lenses
Combined cable Power and LANC Start/Stop for Broadcast Lenses
Combined cable Power and LANC Start/Stop for Broadcast Lenses Combined cable D-Tap Power and Start/Stop for Broadcast Lenses with 12 pin Hirose Lensport connection, control by LANC Interface
Combined cable Power and LANC Start/Stop for Broadcast Lenses 0B 2pin
Combined cable Power and LANC Start/Stop for Broadcast Lenses 0B 2pin
Combined cable Power and LANC Start/Stop for Broadcast Lenses 0B 2pin Combined cable Power Lemo-comp. 0B 2pin connector and Start/Stop for Broadcast Lenses with 12 pin Hirose Lensport connection, control by LANC Interface
DV StudioRig follow focus with gear drive a. FlexiGearRing
DV StudioRig follow focus with gear drive a. FlexiGearRing
DV StudioRig follow focus with gear drive a. FlexiGearRing DV StudioRig follow focus with gear drive 0.8 (206-12 and FlexiGearRing (206-30), scale (205-02), for one-side-operation. For lens diameters up to 110 mm.
DV StudioRig Kit in Case, Follow Focus with all gears
DV StudioRig Kit in Case, Follow Focus with all gears
DV StudioRig Kit in Case, Follow Focus with all gears DV StudioRig plus complete Kit with six gear drives in Case. Consisting of: 206-60S follow focus w. VariLock handwheel, 205-02 scale and gear drives: 206-12, 206-13, 206-14, 206-15, 206-16, 206-17 in Case
DV StudioRig, follow focus
DV StudioRig, follow focus
DV StudioRig, follow focus DV StudioRig, follow focus incl. scale (205-02), for one-side-operation. For lens diameter max. 115 mm measured with gear drive 206-12 (not included). Precise gears with practically no play at a very affordable price. A single lock for rod and extension clamp makes changing of lenses quick. Hand wheel with fine-structured surface for save grip. The scale is easy to change and the reference marking is adjustable for the operator or the assistant. Gear drives and gear rings for the different lenses ensure precise adjustments and can be mounted without tool on both sides of the gear unit
Flexi-Insertring 110:50/85mm for MB450
Flexi-Insertring 110:50/85mm for MB450
Flexi-Insertring 110:50/85mm for MB450 The Chrosziel Flexi-Ring Flexible Step-Down Ring is a 110 to 50-85mm adjustable step-down ring. The ring is designed to provide light protection with the MB-450 matte box series and will fit a variety of wide angle lenses with diameters between 50 and 85mm
Flexi-Insertring 110:75/98mm for MB450 Mattebox
Flexi-Insertring 110:75/98mm for MB450 Mattebox
Flexi-Insertring 110:75/98mm for MB450 Mattebox The Chrosziel Flexi-Ring Flexible Step-Down Ring is a 110 to 75-98mm adjustable step-down ring. The ring is designed to work with the MB-450 matte box series and provide light protection for a variety of wide angle and standard lenses with diameters of 75 to 98mm 
Flexi-Insertring Ø 130 clamp-on
Flexi-Insertring Ø 130 clamp-on
Flexi-Insertring Ø 130 clamp-on Flexi-Insertring for clamp-on-mount Ø 130mm for lens diameter 95 to 125mm. Accessory for MB 456 Academy on rods.
Focus Drive mod 0.8, Ø46,4mm
Focus Drive mod 0.8, Ø46,4mm
Focus Drive mod 0.8, Ø46,4mm Focus Drive for Cine Style and 35mm Film lenses for Studio Rig, mod 0.8, Ø 46,4mm, w 8 mm (teeth 56)
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm Focus drive (for 206-05S + 206-60S), mod 0.8, for gear rings and Canon and Fujinon cine style lenses, Ø 36.8mm, 44 teeth.
Focus Drive mod 0.8 - Ø 25,6mm
Focus Drive mod 0.8 - Ø 25,6mm
Focus Drive mod 0.8 - Ø 25,6mm Focus Drive for Video prime lenses and Cine Style, for Studio Rig, mod 0.8 - Ø 25,6 mm, w 8mm (teeth 30)
Focus Drive mod 0.8, Ø 36.8mm
Focus Drive mod 0.8, Ø 36.8mm
Focus Drive mod 0.8, Ø 36.8mm Focus Drive for CineStyle, DigiPrime lenses for Studio Rig mod 0.8, Ø36.8mm, width 8 mm, teeth 44
Focus Drive mod 0.8, 46mm
Focus Drive mod 0.8, 46mm
Focus Drive mod 0.8, 46mm Focus drive (DV StudioRig / plus) for DigiPrimes + Movie Lenses, mod 0.8, Ø 46mm, 56 teeth.
Handgrip Extender Universal with Hirth Rosette lock
Handgrip Extender Universal with Hirth Rosette lock
Handgrip Extender Universal with Hirth Rosette lock Universal Handgrip Extender with Hirth rosette for Canon EOS C700 and other cameras, extendable between 180 and 250mm
Handle Bar proVideo plus
Handle Bar proVideo plus
Handle Bar proVideo plus Handle Bar plus proVideo (w. 220mm), for use with LWS. With clamp forØ 15mm rods
Kit for Canon EOS C700 w. LWS and Handgrip Extender
Kit for Canon EOS C700 w. LWS and Handgrip Extender
Kit for Canon EOS C700 w. LWS and Handgrip Extender Kit for Canon EOS C700 with Light Weight Support and Handgrip Extender, incl. 401-C700 LWS with Shoulder Pad, 2 Hirth Rosettes, V-Lock Plate, 401-FS7-5-03 Tripod Adapter Plate, 401-FS7-5R-01 Rear Rod Clamp, 2 rods Ø 15mm, length 205mm. 403-40 Universal Handgrip Extender with Hirth rosette lock
This website uses cookies to ensure the best experience possible. More information...