Bridge Plate with Ø19mm rods, L= 440mm, for Sony F23, F35, F55, F65, Phantom Flex and with LWS as adaptor for Red Epic / Scarlet, Canon EOS C Series and other
Adjustable Cable Ties With Multiple Mounts.One of the little things that makes life easier on setSet with 12 pcs "Chaos Cable Ties"4x 1/4" thread4x 3/8" thread 4x stickytapeOrganize your cables on your camera set with our Chaos Cable Ties. These adjustable, reusable ties are great for managing cable on set. they also reduce cable strain as they keep the cable from sliding through unlike other ties. The set comes with 4 ties that have a 3/8th thread and 4 that have 1/4-20 thread to attached to cages and organize cables around the camera they way you want. Because of the thread, you can use them again and again. No threaded mount points available? Chrosziel has you covered with 4 adhesive Chaos Cable Ties in the set.
Chrosziel QuickLock VCT Tripod Plate for cameras with V-mount, fully adjustable 3/8" + 1/4" mount threads. Ultra-lightweight made of aircraft-grade aluminium, quiet, low-noise locking mechanism, play-free mounting of the camera by push and pull release/lock lever. (replaces 401-130)FEATRURESSecure, Play-Free Camera MountingLow-Noise Locking Mechanism
For all cameras with V Mount
Play-Free mounting on the Tripod PlateThe QuickLock Plate 401-150 locking mechanism consists of three parts: movable unlocking bolt at the front,fork-shaped locking slide in the middleretractable locking bolt at the rearTo attach a camera with V-mount adapter to the QuickLock Plate, push it into the V-shaped notch on the front and pull the locking lever to the right. The following happens: Unlocking bolt and locking slide move forwards / left, the locking bolt downwards.
Compared to average standard Quick Release Plates or VCT Tripod Plates (mostly without retractable locking bolts), the Chrosziel locking mechanism with retractable locking bolt has play-freely clamps to secure even worn out rear mounting mechanisms located on the bottom of the camera.
For cine cameras equipped only with tripod screw threads at the bottom , a Chrosziel lightweight support (such as 401-EVA1) enables mounting the camera security to the quick release plate. For ENG cameras, rod support can be added via a Chrosziel lightweight support (like 401-50 for Sony) in combination with the QuickLock Plate.
LIGHT WEIGHT SUPPORT (LWS) 401-C700 for Canon EOS C700 / C700 FF & GS camerasLight Weight Support for Canon EOS C700 (FF) with integrated shoulder pad, 2 rosettes, V-Lock for quick-release plate, rear rod clamp, Tripod Adapter Plate, 2 rods Ø 15mm, length 205mm.COMPATIBLE!
Sony V-Mount for Chrosziel QuickLock Plate 401-150,
Sony VCT-14 or Arri V-Lock-Baseplate
Due to the interchangeable V-Lock Plate the Light Weight Support (LWS) 401-C700 can be modularly used with QuickLock Plates. For instance with the Chrosziel QuickLock Plate 401-150. This Plate is suitable for all cameras which are equipped with wedge plate connections (V-mount) in the front and a mounting bracket behind the shoulder support.
Demount it quickly and easily to install the Tripod Adapter Plate with four srews.
MULTIFUNCTIONAL!
Combined with the Chrosziel DigiCine Bridgeplate (401-F235).
The Tripod Adapter Plate 401-FS7-5-03 also serves as adapter for Chrosziel’s DigiCine Bridge Plate 401-F235 and for direct tripod mounting.
The Tripod Adapter Plate replaces the V-Lock Plate.
STEADY!
Secure hold with the Tripod adapter plate (401-FS7-5-03)
Our Light Weight Support (LWS) 401-C700 is currently delivered with a Tripod Adapter Plate (401-Fs7-5-03). The plate can be used in exchange with the already built-in V-lock plate used. Thus, the support – also without an intermediately mounted quicklockpatte – can be used directly and securely on a tripod.
USER-FRIENDLYOptional accessory Handgrip Extender 403-40
The new Chrosziel Universal Handgrip Extender (403-40) is the perfect complement for your Sony PXW-FS5 when shooting from the shoulder. The Handgrip has two Hirth Rosettes and is extendable between 175 and 250mm.
The Handgrip is universal and can be used not only with the Canon C700 but also with other cameras.
EXTENSIONOptional accessory
Our high quality leather handgrips in a set: can be extended, rotated and pivoted, with rosette connection.
The Chrosziel handgrips (403-30) are available as an optional accessory to the Light Weight Support 401-C700. You own ergonomically designed handpieces made of genuine leather. The handles are also universally usable on all cameras and mount with the internationally used Hirth joint with M6 thread.
Kit MB 450W for Canon EOS C100, 300, 500: 450W-20 Super Wide MatteBox, french flag (450-11), 2 rotating filterholders multiformat 4x4/4x5.650 (410-04), bracket f. Ø15mm rods, clamp plate Ø 130mm 411-67 Ring 130:110mm (screw-in) 450-20 Flexi-Insertring 110:75/98mm 401-C300MKIIA LWS 15 for Canon EOS C Series
Kit for Canon EOS C100, C300, C500 for lenses with outer Ø 95-125mm: MatteBox 456 Academy Double, with Double Rotating Filterstage, french flag (402-26), 2 filterholders multi 5x5/4x5.650 (510-01), 16:9 matte insert (416-03), bracket for Ø15 mm rods and clamp adaptor Ø130mm. 401-456 LWS 15 HD Canon EOS C Series 411-68 Flexi-Insertring lens dia 95-125mm.
MatteBox 450W Super Wide MatteBox for Wide-Angle lenses, with double-rotating Filter Stages The Chrosziel MB 450W Super Wide Matte Box is a lightweight, yet robust, carbon fiber matte box for professional cinema and video cameras. The "Super Wide" design allows for full frame lenses as wide as 20mm to be used. 1/3"-chip camcorders can use as wide as 2.6mm focal length setting without vignetting. 1/2"-chip camcorders can use down to 3.6mm. Use the included top flag to control glare and reflections for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side and bottom flags.Both filter stages accept 4x4" and 4x5.65" filters and rotate for use and control of polarizing as well as graduated filters. To use this matte box on your camera, the camera must be mounted on a separately available 15mm LWS baseplate. Fit the matte box on the rods until it covers the lens front. Rod-mounted matte boxes are preferred over clamp-on matte boxes in many production situations as they are always properly aligned with the image horizon.What's In The Box: MB450W MatteBox French flag (450-11)2 filter holders multiformat 4x4/4x5.650 (410-31), bracket for Ø15mm rodsclamp adapter Ø130mm
The Chrosziel Matte Box 456-20 Academy (2 Filter Holders) consists of a 456-R20 matte box, French flag, a filter stage for two individually rotating filter holders, two 4 x 5.65"/5 x 5" filter holders, a 130mm clamp-on rear plate, and a bracket for 15mm lightweight support rods. It is ideal for use with handheld and studio production cameras.The 456-R20 Matte Box offers a wide angle (16:9/4:3) housing for lenses as wide as 12mm (35mm Academy) and eliminates the effects of vignetting. Equipped with a filter stage for two independently rotating 4 x 5.65"/5 x 5" filter holders, the matte box provides sufficient space for adjusting the position of filters.Provided with a French flag, the Matte Box 456-20 Academy controls the angle of light and eliminates lens glare and flare. It can be coupled with optional side wings for accurate light adjustment. The kit includes a 130mm clamp-on rear plate and a bracket for use with 15mm lightweight support rods (optional).With optional bridge plate adapters, you can interface the kit with 15 or 19mm bridge plate rods. An optional swing-away bracket, attached to the back of the matte box housing, allows for quick and efficient lens changes.What's in the Box: Matte Box 456 Academy Double, for full frame cameras, with Double-Rotating Filter StageFrench flag (402-26)2 filter holders multiformat 5x5/4x5.650 (510-01)16:9 (416-03) matte insertBracket for Ø15mm rods and clamp adaptor Ø130mm