Canon EOS C500 Mark II
Canon EOS C500 Mark II
Chaos Cable Ties
Chaos Cable Ties Adjustable Cable Ties With Multiple Mounts.One of the little things that makes life easier on setSet with 12 pcs "Chaos Cable Ties"4x 1/4" thread4x 3/8" thread 4x stickytapeOrganize your cables on your camera set with our Chaos Cable Ties. These adjustable, reusable ties are great for managing cable on set. they also reduce cable strain as they keep the cable from sliding through unlike other ties. The set comes with 4 ties that have a 3/8th thread and 4 that have 1/4-20 thread to attached to cages and organize cables around the camera they way you want. Because of the thread, you can use them again and again. No threaded mount points available? Chrosziel has you covered with 4 adhesive Chaos Cable Ties in the set.
Chrosziel QuickLock V-Mount Tripod Plate
Chrosziel QuickLock V-Mount Tripod Plate Chrosziel QuickLock VCT Tripod Plate for cameras with V-mount, fully adjustable 3/8" + 1/4" mount threads. Ultra-lightweight made of aircraft-grade aluminium, quiet, low-noise locking mechanism, play-free mounting of the camera by push and pull release/lock lever. (replaces 401-130)FEATRURESSecure, Play-Free Camera MountingLow-Noise Locking Mechanism For all cameras with V Mount Play-Free mounting on the Tripod PlateThe QuickLock Plate 401-150 locking mechanism consists of three parts: movable unlocking bolt at the front,fork-shaped locking slide in the middleretractable locking bolt at the rearTo attach a camera with V-mount adapter to the QuickLock Plate, push it into the V-shaped notch on the front and pull the locking lever to the right. The following happens: Unlocking bolt and locking slide move forwards / left, the locking bolt downwards. Compared to average standard Quick Release Plates or VCT Tripod Plates (mostly without retractable locking bolts), the Chrosziel locking mechanism with retractable locking bolt has play-freely clamps to secure even worn out rear mounting mechanisms located on the bottom of the camera. For cine cameras equipped only with tripod screw threads at the bottom , a Chrosziel lightweight support (such as 401-EVA1) enables mounting the camera security to the quick release plate. For ENG cameras, rod support can be added via a Chrosziel lightweight support (like 401-50 for Sony) in combination with the QuickLock Plate.
Lensport Iris Motor for cine lenses and Hirose 12pin output cameras
Lensport Iris Motor for cine lenses and Hirose 12pin output cameras Universal Lensport Iris Motor for cine lenses in Broadcast / ENG Run& Gun setups The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-LP-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter.The Chrosziel Lensport Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera. Compatibility: The Universal Iris Motor has been successfully tested with the following cameras (manual and automatic iris control): ARRI Amira Blackmagic URSA Broadcast G2 & URSA Mini Pro 12K Canon C300/500 with EU-V2 expansion unit Panasonic AK-PLV100 Sony F5/F55 with LA-FZB1 adapter Sony Venice Sony E-Mount cameras with Chrosziel MetaMount MA-EPL-HR12 Manual Passive Mode: For temporary manual control, the motor can be set to passive mode. Simply press the motor button once briefly and the motor can be rotated freely. Once the button is pressed again, the motor is back in Active mode and controlled by the camera. Metadata:For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready! FEATURESUniversal Iris motor The Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via any Hirose 12pin camera outputThe camera's Hirose 12pin Lensport output controls directly the Iris motor unit. Remote Iris and AutoIris controlUse the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control.
Light Weight support for Canon EOS C 300 Mark III & Canon EOS C 500 Mark II
Light Weight support for Canon EOS C 300 Mark III & Canon EOS C 500 Mark II Features of the LightWeight Support for Canon EOS C 300 Mark III and Canon EOS C 500 Mark II: new comfortable ergonomic soft shoulder pad, two rosette (right and left), numerous 3/8″ & 1/4″ fastening points incl. ARRI anti-twist safeguard, compatibility to QuickRelease and tripod adapter plates and optional rear rod support. The LightWeight Support can be modularly used with industry standard QuickLock Plates. The Chrosziel QuickLock Plate 401-150 is suitable for all cameras which are equipped with wedge plate connections (V mount) in the front and a mounting bracket behind the shoulder support. The QuickLock Plate connects the camera quickly and easily, and even after decades of use. 2 Rosettes V-Lock-Plate 401-FS7/5-03 Tripodapterplate 2 Rods Ø 15 mm Lenght: 205 mm
Mattebox Kit 450W-20 for Canon EOS C Series
Mattebox Kit 450W-20 for Canon EOS C Series Kit MB 450W for Canon EOS C100, 300, 500: 450W-20 Super Wide MatteBox, french flag (450-11), 2 rotating filterholders multiformat 4x4/4x5.650 (410-04), bracket f. Ø15mm rods, clamp plate Ø 130mm 411-67 Ring 130:110mm (screw-in) 450-20 Flexi-Insertring 110:75/98mm 401-C300MKIIA LWS 15 for Canon EOS C Series
Mattebox Kit 456-20 for Canon EOS C Series
Mattebox Kit 456-20 for Canon EOS C Series Kit for Canon EOS C100, C300, C500 for lenses with outer Ø 95-125mm: MatteBox 456 Academy Double, with Double Rotating Filterstage, french flag (402-26), 2 filterholders multi 5x5/4x5.650 (510-01), 16:9 matte insert (416-03), bracket for Ø15 mm rods and clamp adaptor Ø130mm. 401-456 LWS 15 HD Canon EOS C Series 411-68 Flexi-Insertring lens dia 95-125mm.
MatteBox MB 450W Super Wide
MatteBox MB 450W Super Wide MatteBox 450W Super Wide MatteBox for Wide-Angle lenses, with double-rotating Filter Stages The Chrosziel MB 450W Super Wide Matte Box is a lightweight, yet robust, carbon fiber matte box for professional cinema and video cameras. The "Super Wide" design allows for full frame lenses as wide as 20mm to be used. 1/3"-chip camcorders can use as wide as 2.6mm focal length setting without vignetting. 1/2"-chip camcorders can use down to 3.6mm. Use the included top flag to control glare and reflections for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side and bottom flags.Both filter stages accept 4x4" and 4x5.65" filters and rotate for use and control of polarizing as well as graduated filters. To use this matte box on your camera, the camera must be mounted on a separately available 15mm LWS baseplate. Fit the matte box on the rods until it covers the lens front. Rod-mounted matte boxes are preferred over clamp-on matte boxes in many production situations as they are always properly aligned with the image horizon.What's In The Box: MB450W MatteBox French flag (450-11)2 filter holders multiformat 4x4/4x5.650 (410-31), bracket for Ø15mm rodsclamp adapter Ø130mm
Top-Plate for the Canon EOS C300 Mark III & Canon EOS C500 Mark II
Top-Plate for the Canon EOS C300 Mark III & Canon EOS C500 Mark II The top plate for Canon EOS C300 Mark III and the Canon EOS C500 Mark II cameras comes withrod support in standard optical height, numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard, recess for further use of the Canon handle and an optical marker for attaching a measuring tape. Ø15mm rod attachment with integrated mounting points 1/4" and 3/8" pair of Ø15mm rods - 9cm /3.55inch with internal thread (extendable)