Go to homepage

Panasonic

Panasonic


Filter
Articulating arm ROCKY
Articulating arm ROCKY
Articulating arm ROCKY Articulating arm ROCKY with 2-step central clamp, with 1/4" thread and cold shoe adapter L. 150 mm, weight 158 gr., payload 3 kg. The central clamp first fixes the articulation and second the ball pivot. The 90° slot is rotating and can be fixed.
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods Bridge Plate incl. Ø19mm Rods, l. 440mm (for combination with QuickLock Tripod Plates 401-120/401-130 )
Chaos Cable Ties
Chaos Cable Ties
Chaos Cable Ties Adjustable Cable Ties With Multiple Mounts.One of the little things that makes life easier on setSet with 12 pcs "Chaos Cable Ties"4x 1/4" thread4x 3/8" thread 4x stickytapeOrganize your cables on your camera set with our Chaos Cable Ties. These adjustable, reusable ties are great for managing cable on set. they also reduce cable strain as they keep the cable from sliding through unlike other ties.  The set comes with 4 ties that have a 3/8th thread and 4 that have 1/4-20 thread to attached to cages and organize cables around the camera they way you want. Because of the thread, you can use them again and again. No threaded mount points available? Chrosziel has you covered with 4 adhesive Chaos Cable Ties in the set. 
Chrosziel QuickLock V-Mount Tripod Plate
Chrosziel QuickLock V-Mount Tripod Plate
Chrosziel QuickLock V-Mount Tripod Plate Chrosziel QuickLock VCT Tripod Plate for cameras with V-mount, fully adjustable 3/8" + 1/4" mount threads. Ultra-lightweight made of aircraft-grade aluminium, quiet, low-noise locking mechanism, play-free mounting of the camera by push and pull release/lock lever.  (replaces 401-130)FEATRURESSecure, Play-Free Camera MountingLow-Noise Locking Mechanism For all cameras with V Mount Play-Free mounting on the Tripod PlateThe  QuickLock Plate 401-150 locking mechanism consists of three parts: movable unlocking bolt at the front,fork-shaped locking slide in the middleretractable locking bolt at the rearTo attach a camera with V-mount adapter to the QuickLock Plate, push it into the V-shaped notch on the front and pull the locking lever to the right. The following happens: Unlocking bolt  and locking slide  move forwards / left, the locking bolt downwards. Compared to average standard Quick Release Plates or VCT Tripod Plates (mostly without retractable locking bolts), the Chrosziel locking mechanism with retractable locking bolt has play-freely clamps to secure even worn out rear mounting mechanisms located on the bottom of the camera. For cine cameras equipped only with tripod screw threads at the bottom , a Chrosziel lightweight support (such as 401-EVA1) enables mounting the camera security to the quick release plate. For ENG cameras, rod support can be added via a Chrosziel lightweight support (like 401-50 for Sony) in combination with the QuickLock Plate.
Clamp on Matte Box SD 411, SunShade, 2 4x4 filter holders
Clamp on Matte Box SD 411, SunShade, 2 4x4 filter holders
Clamp on Matte Box SD 411, SunShade, 2 4x4 filter holders The 411-50 4x4 Clamp-on SunShade by Chrosziel is a wide angle mattebox with filter holder that is made for internal focus run-n-gun broadcast or cinema lenses. This unit comes with a 16:9 mask but will also work in 4:3 mode. This unit as a whole works as a matte box, enabling the user to add more control to the image--perfect for videographers shooting film-style and event shooters wanting to upgrade their image quality.What's in the Box: Matte box SD 411, SunShade 4x4 (16:9/4:3)Mask 16:9French Flag, 2 Filterholder 4x4 (1 rotating)Clamp Adaptor Ø104 mm
Clamp On Matte Box SD 412 Sunshade 104mm, complete
Clamp On Matte Box SD 412 Sunshade 104mm, complete
Clamp On Matte Box SD 412 Sunshade 104mm, complete The Chrosziel C-412-02F Wide-Angle Lens Sunshade is a 16:9 / 4:3 104mm clamp-on sunshade designed to work with select wide-angle lenses that feature a focal length down to 16mm in Full Frame or 4.3mm n 2/3 sensor cameras. With a 104mm clamping back, the sunshade reduces glare which helps eliminate lens flares. Two filter stages are included, one 4 x 4" / 4 x 5.65" and the rotating rear stage which accommodates 5 x 5" / 4 x 5.65" filters.Side Wings are available separately for even greater light control. What's in the Box: Compact SunShade 4:3 /16:9 F4.5, with housing CLWAH-F4.5French Flag, Filter Stage CF-SS/F4.52 Filterholder - 1x fixed multi-format 4x4/4x5.650 (410-31) and 1x rotatable multi-format 5x5/4x5.650 (510-01)Clamp Adaptor Ø104 mm
Clamp On Matte Box SD 412 Sunshade 110mm, complete
Clamp On Matte Box SD 412 Sunshade 110mm, complete
Clamp On Matte Box SD 412 Sunshade 110mm, complete The Chrosziel 412-02F110 Wide-Angle Lens Sunshade is a 16:9 / 4:3 110mm clamp-on sunshade designed to work with select wide-angle lenses that feature a focal length down to 16mm in Full Frame lenses or 4.3mm in 2/3 sensor lenses. With a 110mm clamping back, the sunshade reduces glare which helps eliminate lens flares. Two filter stages are included, one 4 x 4" / 4 x 5.65" and the rotating rear stage which accommodates 5 x 5" / 4 x 5.65" filters.Side Wings are available separately for even greater lighting control. What's in the Box: Compact SunShade 4:3/16:9 F4.5 = CLWAH-F4.5French Flag + CF-SS/1102 Filter holders 1x fixed multiformat 4x4/4x5.650 (410-31) a. 1x rotatable multi-format 5x5/4x5.650 (510-01)Clamp Adaptor Ø110 mm
Clamp On Matte Box SD 412 Sunshade 130mm, complete
Clamp On Matte Box SD 412 Sunshade 130mm, complete
Clamp On Matte Box SD 412 Sunshade 130mm, complete The Chrosziel 412-02F130 Sunshade is a lightweight 16:9/4:3  130mm clamp-on sunshade designed to work with select full frame lenses down to 16mm and 2/3" lenses that have focal lengths down to 4.3mm. The sunshade reduces glare which helps eliminate lens flares. This sunshade includes a top French flag. Side Wings are available as an optional accessory for even greater lighting control. Additionally, the kit includes two filter stages (one fixed, one rotating) with trays that are capable of holding square filters. The front filter stage holds 4 x 5.65" & 4 x 4" filters, and the rear rotating stage holds 5 x 5" and 4 x 5.65" filters.Note: Requires step-down rings – use the 412 series for a 130mm clamping back.What's in the Box: Compact Sunshade 4:3/16:9 F4.5 = CLWAH-F4.5French Flag + CF-SS/1302 Filter holders 1x fixed multiformat 4x4/4x5.650 (410-31) a. 1x rotatable multi-format 5x5/4x5.650 (510-01)Clamp Adaptor Ø130 mm
Combined Cable CDM Zoom angle 90° Power+on/off F55
Combined Cable CDM Zoom angle 90° Power+on/off F55
Combined Cable CDM Zoom angle 90° Power+on/off F55 Combined Power Cable + camera start/stop f. cameras Sony F55 a. Panasonic Varicam HRS 4pin 12V - Aladin2 / MagNum / CDM-XXX-Z Zoom motor Lemo 0B 5pin angle 90°
DSLR/Mirrorless Shoulder Kit Comfort with Multipad and Carrying Handle
DSLR/Mirrorless Shoulder Kit Comfort with Multipad and Carrying Handle
DSLR/Mirrorless Shoulder Kit Comfort with Multipad and Carrying Handle DSLR/Mirrorless Shoulder Kit Comfort, consisting of 401-453 Light Weight Support 15 HD for DSLR 403-20L Handle Bar proVideo plus w. lever 3050 MultiPad 15 Shoulder Support 3300 Carrying Handle for DSLR cameras
DV StudioRig follow focus with gear drive a. FlexiGearRing
DV StudioRig follow focus with gear drive a. FlexiGearRing
DV StudioRig follow focus with gear drive a. FlexiGearRing DV StudioRig follow focus with gear drive 0.8 (206-12 and FlexiGearRing (206-30), scale (205-02), for one-side-operation. For lens diameters up to 110 mm.
DV StudioRig Kit in Case, Follow Focus with all gears
DV StudioRig Kit in Case, Follow Focus with all gears
DV StudioRig Kit in Case, Follow Focus with all gears DV StudioRig plus complete Kit with six gear drives in Case. Consisting of: 206-60S follow focus w. VariLock handwheel, 205-02 scale and gear drives: 206-12, 206-13, 206-14, 206-15, 206-16, 206-17 in Case
DV StudioRig, follow focus
DV StudioRig, follow focus
DV StudioRig, follow focus DV StudioRig, follow focus incl. scale (205-02), for one-side-operation. For lens diameter max. 115 mm measured with gear drive 206-12 (not included). Precise gears with practically no play at a very affordable price. A single lock for rod and extension clamp makes changing of lenses quick. Hand wheel with fine-structured surface for save grip. The scale is easy to change and the reference marking is adjustable for the operator or the assistant. Gear drives and gear rings for the different lenses ensure precise adjustments and can be mounted without tool on both sides of the gear unit
Flexi-Insertring 110:50/85mm for MB450
Flexi-Insertring 110:50/85mm for MB450
Flexi-Insertring 110:50/85mm for MB450 The Chrosziel Flexi-Ring Flexible Step-Down Ring is a 110 to 50-85mm adjustable step-down ring. The ring is designed to provide light protection with the MB-450 matte box series and will fit a variety of wide angle lenses with diameters between 50 and 85mm
Flexi-Insertring 110:75/98mm for MB450 Mattebox
Flexi-Insertring 110:75/98mm for MB450 Mattebox
Flexi-Insertring 110:75/98mm for MB450 Mattebox The Chrosziel Flexi-Ring Flexible Step-Down Ring is a 110 to 75-98mm adjustable step-down ring. The ring is designed to work with the MB-450 matte box series and provide light protection for a variety of wide angle and standard lenses with diameters of 75 to 98mm 
Focus Drive mod 0.8, Ø46,4mm
Focus Drive mod 0.8, Ø46,4mm
Focus Drive mod 0.8, Ø46,4mm Focus Drive for Cine Style and 35mm Film lenses for Studio Rig, mod 0.8, Ø 46,4mm, w 8 mm (teeth 56)
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm Focus drive (for 206-05S + 206-60S), mod 0.8, for gear rings and Canon and Fujinon cine style lenses, Ø 36.8mm, 44 teeth.
Focus Drive mod 0.8 - Ø 25,6mm
Focus Drive mod 0.8 - Ø 25,6mm
Focus Drive mod 0.8 - Ø 25,6mm Focus Drive for Video prime lenses and Cine Style, for Studio Rig, mod 0.8 - Ø 25,6 mm, w 8mm (teeth 30)
Focus Drive mod 0.8, Ø 36.8mm
Focus Drive mod 0.8, Ø 36.8mm
Focus Drive mod 0.8, Ø 36.8mm Focus Drive for CineStyle, DigiPrime lenses for Studio Rig mod 0.8, Ø36.8mm, width 8 mm, teeth 44
Focus Drive mod 0.8, 46mm
Focus Drive mod 0.8, 46mm
Focus Drive mod 0.8, 46mm Focus drive (DV StudioRig / plus) for DigiPrimes + Movie Lenses, mod 0.8, Ø 46mm, 56 teeth.
Handgrip Extender with bayonet lock for Panasonic AU-EVA1
Handgrip Extender with bayonet lock for Panasonic AU-EVA1
Handgrip Extender with bayonet lock for Panasonic AU-EVA1 Handgrip Extender with bayonet lock for Panasonic AU-EVA1, extendable from 175 to 250mm, incl. 403-EVA1-01 cable with 2,5mm jack connector and socket, length 300mm, Hirth-Rosette with screws. For use with Chrosziel LWS 401-EVA1 or directly on the camera with included HirthRosette.
Handle Bar proVideo plus
Handle Bar proVideo plus
Handle Bar proVideo plus Handle Bar plus proVideo (w. 220mm), for use with LWS. With clamp forØ 15mm rods
Kit for Pana AU-EVA1: Lightweight Support, Handgrip Extender
Kit for Pana AU-EVA1: Lightweight Support, Handgrip Extender
Kit for Pana AU-EVA1: Lightweight Support, Handgrip Extender Kit for Panasonic AU-EVA1 with Light Weight Support and Handgrip Extender: 401-EVA1 LWS with extendable Shoulder Pad, 2 Hirth Rosettes, V-Lock Plate, 401-FS7-5-03 Tripod Adapter Plate, 2 rods Ø 15mm, length 205mm. 403-EVA1 Handgrip Extender with bayonet lock,incl. extension cable with jack connector, length 300mm, Hirth-Rosette with screws.
Lens Support DSLR Tele
Lens Support DSLR Tele
Lens Support DSLR Tele Lens Support DSLR Tele, for telephoto lenses with 1/4" tripod mount, adjustable between 4 and 11 mm above support rods. For mounting on 15mm LWS
This website uses cookies to ensure the best experience possible. More information...