Chrosziel products compatible the Sony FX9 Cine Camera

Sony PXW-FX9

Tip

CDM-MK-Z2

CDM-MK-Z2 CDM-MK-Z2 - compact control-unit for Fujinon Zoom MK 18-55, 50-135mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. Incl. 1x digital servo-motor-unit, 1x LANC cable, 1x LANC extension cable, 1 x MN-AB (powercable 12 Volt A/B D-Tap 0B 5pin), 1x Allen Key, 1x Mini-USB-adapter.DESIGNED FOR FUJINON MK 18-55MM T2.9 & FUJINON MK 50-135MM T2.9 CONTROLLED VIA SONY FS & LANC HANDGRIP Control directly the zoom servo drive via optically de-coupled LANC sockets and Sony FS5 / FS7 handgrip zoom rocker. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip. CAMERA CONTROL SIGNALS FORWARDED Control signals (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera. SINGLE UNIT MOUNTED ONTO LENS Two captive screws keeping the single servo drive unit permanently fixed onto lens. 4 ZOOM MODES 1st EB / Documentary, 2nd Live / Hardcut, 3rd Silent, 4th Direct Mode

CDM-XK-Z2

Chaos Cable Ties

Chaos Cable Ties Adjustable Cable Ties With Multiple Mounts.One of the little things that makes life easier on setSet with 12 pcs "Chaos Cable Ties"4x 1/4" thread4x 3/8" thread 4x stickytapeOrganize your cables on your camera set with our Chaos Cable Ties. These adjustable, reusable ties are great for managing cable on set. they also reduce cable strain as they keep the cable from sliding through unlike other ties. The set comes with 4 ties that have a 3/8th thread and 4 that have 1/4-20 thread to attached to cages and organize cables around the camera they way you want. Because of the thread, you can use them again and again. No threaded mount points available? Chrosziel has you covered with 4 adhesive Chaos Cable Ties in the set.

Chrosziel QuickLock V-Mount Tripod Plate

Chrosziel QuickLock V-Mount Tripod Plate Chrosziel QuickLock VCT Tripod Plate for cameras with V-mount, fully adjustable 3/8" + 1/4" mount threads. Ultra-lightweight made of aircraft-grade aluminium, quiet, low-noise locking mechanism, play-free mounting of the camera by push and pull release/lock lever. (replaces 401-130)FEATRURESSecure, Play-Free Camera MountingLow-Noise Locking Mechanism For all cameras with V Mount Play-Free mounting on the Tripod PlateThe QuickLock Plate 401-150 locking mechanism consists of three parts: movable unlocking bolt at the front,fork-shaped locking slide in the middleretractable locking bolt at the rearTo attach a camera with V-mount adapter to the QuickLock Plate, push it into the V-shaped notch on the front and pull the locking lever to the right. The following happens: Unlocking bolt and locking slide move forwards / left, the locking bolt downwards. Compared to average standard Quick Release Plates or VCT Tripod Plates (mostly without retractable locking bolts), the Chrosziel locking mechanism with retractable locking bolt has play-freely clamps to secure even worn out rear mounting mechanisms located on the bottom of the camera. For cine cameras equipped only with tripod screw threads at the bottom , a Chrosziel lightweight support (such as 401-EVA1) enables mounting the camera security to the quick release plate. For ENG cameras, rod support can be added via a Chrosziel lightweight support (like 401-50 for Sony) in combination with the QuickLock Plate.

Extension cable coiled Sony Multiport 20-40cm/8-16inch

Extension cable coiled Sony Multiport 20-40cm/8-16inch Extension cable coiled for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller. Length: 20-40cm/816inch1 cable tie incl.

Extension cable coiled Sony Multiport 200-400cm/6-13feet

Extension cable coiled Sony Multiport 200-400cm/6-13feet Extension cable coiled for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller.Length 200-400cm/ 6.5-13 feet1 cable tie incl.

Extension cable coiled Sony Multiport 300-600cm/10-20feet

Extension cable coiled Sony Multiport 300-600cm/10-20feet Extension cable coiled for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller.Length: 300-600cm/ 10-20 feet1 cable tie incl.

Extension cable coiled Sony Multiport 40-80cm/16-32inch

Extension cable coiled Sony Multiport 40-80cm/16-32inch Extension cable coiled for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller.Length: 40-80cm/ 16-32inch1 cable tie incl.

Extension cable for Sony Multiport 10m/33feet

Extension cable for Sony Multiport 10m/33feet Extension cable for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller (length 10m/33feet). 1 Chrosziel cable tie incl.

Extension cable for Sony Multiport 12.5cm/5inch

Extension cable for Sony Multiport 12.5cm/5inch Extension cable for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller (length 12.5cm/5inch). Socket with mounting points, 1 cable tie incl.

Extension cable for Sony Multiport 150cm/5feet

Extension cable for Sony Multiport 150cm/5feet Extension cable for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller (length 150cm/5feet). 1 cable tie incl.

Extension cable for Sony Multiport 30cm/12inch

Extension cable for Sony Multiport 30cm/12inch Extension cable for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller (length 30cm/12inch). 1 cable tie incl.

Extension cable for Sony Multiport 5cm/2inch

Extension cable for Sony Multiport 5cm/2inch Extension cable for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller (length 5cm/2inch). Socket with mounting points, 1 cable tie incl.

Extension cable for Sony Multiport 600cm/20feet

Extension cable for Sony Multiport 600cm/20feet Extension cable for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller (length 600cm/20feet). 1 Chrosziel cable tie incl.

Extension cable for Sony Multiport 60cm/24inch

Extension cable for Sony Multiport 60cm/24inch Extension cable for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller (length 60cm/24inch). 1 cable tie incl.

FX9 Kit LWS +Top Plate for Sony PXW-FX9

FX9 Kit LWS +Top Plate for Sony PXW-FX9 Light weight support (LWS) and top plate for Sony PXW-FX9: LWS with integrated shoulder pad, 2 rosettes, V-Lock-Plate, 401-FS7/5-03 Tripod Adapter Plate, 2 rods Ø 15mm, length 205mm Top plate with Ø15mm rod attachment, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm / 3.55inch with internal thread (extendable)

Tip

FX9 Y-cable Sony Multi-Jack 3,5mm

FX9 Y-cable Sony Multi-Jack 3,5mm Y-cable for Sony FX9 - Sony Multi plug and socket to 3.5mm serial male Jack (90 degree),35cm, only for servo drives version 2

Lensport Iris Motor for cine lenses and Hirose 12pin output cameras

Lensport Iris Motor for cine lenses and Hirose 12pin output cameras Universal Lensport Iris Motor for cine lenses in Broadcast / ENG Run& Gun setups The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-LP-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter.The Chrosziel Lensport Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera. Compatibility: The Universal Iris Motor has been successfully tested with the following cameras (manual and automatic iris control): ARRI Amira Blackmagic URSA Broadcast G2 & URSA Mini Pro 12K Canon C300/500 with EU-V2 expansion unit Panasonic AK-PLV100 Sony F5/F55 with LA-FZB1 adapter Sony Venice Sony E-Mount cameras with Chrosziel MetaMount MA-EPL-HR12 Manual Passive Mode: For temporary manual control, the motor can be set to passive mode. Simply press the motor button once briefly and the motor can be rotated freely. Once the button is pressed again, the motor is back in Active mode and controlled by the camera. Metadata:For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready! FEATURESUniversal Iris motor The Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via any Hirose 12pin camera outputThe camera's Hirose 12pin Lensport output controls directly the Iris motor unit. Remote Iris and AutoIris controlUse the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control.

Light Weight Support with shoulder pad for Sony PXW-FX9

Light Weight Support with shoulder pad for Sony PXW-FX9 Light weight support for Sony PXW-FX9, with integrated shoulder pad, 2 rosettes, V- Lock-Plate, 401-FS7/5-03 Tripod Adapter Plate2 rods Ø 15mm, l. 205mm.LIGHTWEIGHT SUPPORT (LWS) FOR SONY FX9 CAMERAS Features of the LightWeight Support 401-FX9: new comfortable ergonomic soft shoulder pad, two rosette (right and left), numerous 3/8″ & 1/4″ fastening points incl. ARRI anti-twist safeguard, compatibility to QuickRelease and tripod adapter plates and optional rear rod support.The LightWeight Support can be modularly used with industry standard QuickLock Plates. The Chrosziel QuickLock Plate 401-150 is suitable for all cameras which are equipped with wedge plate connections (V mount) in the front and a mounting bracket behind the shoulder support. The QuickLock Plate connects the camera quickly and easily, and even after decades of use. LIGHT AS A FEATHER: THE SHOULDER PAD OF THE 401-FX9 LIGHTWEIGHT SUPPORT The shoulder pad under the light support can be moved over a wide range. A lever clamp mechanism with external lever access allows the user to slide it on the shoulder. This allows him to quickly correct the balance of the camera during operation. The pad is tapered to fit the shoulder and has an elevation toward the neck for side protection. After fully opening the lever clamp, the pad can be removed and inserted rotated 180 degrees, so that one can equally use the light support on the left or right shoulder. The pad itself is manufactured using a new process from the automotive industry in a special mold with a molded core surrounded by an elastic material with a strong durable outer shell. This multi-layer construction results in high comfort and fatigue-free work.User feedback played a key role while designing the LightWeight Support 401-FX9.The result is a completely re-design of the shoulder pad:Use of a two component cushioning material Shoulder pad adapts to the physical conditions when under pressure Shoulder pad is adjustable (forward and backward) FITS PERFECTLY Secure hold with tripod adpter plate 401-FS7/5-03The standard scope of delivery of the LightWeight Support 401-FX9 consists of a tripod adapter plate 401-FS7/5-03. With the tripod adapter plate the lightweight support can be directly and securely mounted to a tripod without a VCT QuickLock Plate (universal plate). It is just necessary to replace the pre-assembled V Lock by the tripod adapter plate.CLAMPS ONLY WHEN NEEDED: REAR ROD CLAMP FOR 15 MM RODS Useful add-on to the Sony PXW-FX9 setupTo expand the Sony PWX-FX9 setup with battery packs, break out boxes etc. Chrosziel offers a rear rod clamp für the LWS 401-FX9. Only one screw is needed to easily mount the rear rod clamp to the lightweight support. It offers two 15 mm rod insertions that can be comfortably fixed by a locking screw.IN THE BOX 2 rosettes V-Lock-Plate 401-FS7/5-03 Tripod Adapter Plate 2 rods Ø 15mm length: 205mm

MagNum on/off LANC

MagNum on/off LANC MagNum camera start/stop cable Lemo 0B 9pin - 2,5mm jack for LANC (TM) connection (div. cameras)

Mount Adapter E-to-PL with built-in electronics for lens meta data

Mount Adapter E-to-PL with built-in electronics for lens meta data The Chrosziel Meta Mount is a Sony E camera to PL lens “hot mount” adapter with metadata communication. Each mount has the required pin contacts necessary to transmit lens metadata through to the camera and conversely the contacts provide lens control through a 12-pin Hirose out connection to an ENG lens. When the Meta Mount is used with cine lenses with LDS or Cooke/i Data the metadata such as iris setting, focus distance and zoom focal length are transmitted through the adapter and appear in the viewfinder, on the monitor and are recorded in the video file for use in post processing. When the Meta Mount is used with an ENG servo motor-controlled broadcast lens the Focus/Iris/Zoom servo’s can be controlled through the camera and are compatible with the Sony FX9 / FX6 / FX3 hand grips, RCP or camera’s web GUI. This allows for easy and full control of an ENG broadcast lens through a Sony E mount camera. The Meta Mount is shimmable with the included shim set for the E-mount.Key Features: · Sony E Mount Camera to PL mount Lens · Electronic contacts for metadata communication and lens control · Lens metadata displayed in camera and recorded to file · Shimmable E Mount · Full focus/Iris/Zoom control on servo motor ENG lenses Technical data: - E Mount camera to PL mount lens - Contact and electronics for Metadata communication - 12-pin Hirose out for ENG lens control - 3/8th lens support socket - USB Type min A-B (for firmware updates only) - Power supply 10-16V (Lemo compatible 0B 5-pin) - Power consumption max. ca. 350mAh @ 12V - Part number MA-EPL-HR12 - EAN number: 4250618846934 In the box: - 1x Meta Mount E-to-PL adapter (MA-EPL-HR12) - 1x MN-AB (power supply cable 12 Volt A/B D-Tap – 0B 5-pin Lemo) - 1x F55-A2-P-CAM - 1x Shim Set, E-Mount side - 1x USB Mini Adapter Sign up for META MOUNT email updatesDon't miss future news about the META MOUNT and subscribe to the META MOUNT Email list. Yes, keep me updated about the META MOUNT and send me future news about it.NOTE: we will not use your email for any other emails not related to the Meta Mount.

Top-Plate for Sony PXW-FX9

Top-Plate for Sony PXW-FX9 Top-Plate for Sony PXW-FX9, Ø15mm rod attachment, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm / 3.55inch with internal thread (extendable).401-FX9-TOP: THE CHERRY ON THE SONY PXW-FX9 “CAKE”The Top Plate comes with rod support in standard optical height, numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard, recess for further use of the electronic FX9 handle and an optical marker for attaching a measuring tape. Top-Plate for Sony PXW-FX9, Ø15mm rod attachment, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm /3.55inch with internal thread (extendable)

ZOOM SERVO DRIVE FOR ZEISS LIGHTWEIGHT ZOOM LWZ3 21-100 MM – VERSION II

ZOOM SERVO DRIVE FOR ZEISS LIGHTWEIGHT ZOOM LWZ3 21-100 MM – VERSION II CDM-LWZ3-Z2 - compact control-unit for Zeiss Zoom LWZ.3 21-100mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. Incl. 1x digital servo-motor-unit, 1x LANC cable, 1x LANC extension cable, 1 x MN-AB (powercable 12 Volt A/B D-Tap 0B 5pin), 1x Allen Key, 1x Mini-USB-adapter.ZOOM SERVO DRIVE FOR ZEISS LIGHTWEIGHT ZOOM LWZ3 21-100 MM – VERSION II MOTORIZING YOUR ZEISS LWZ.3 ZOOM LENS WITH CDM-LWZ3-Z2 CONTROLLED VIA SONY FS & LANC HANDGRIP Control directly the zoom servo drive via optically de-coupled LANC sockets and Sony FS5 / FS7 handgrip zoom rocker. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip. CAMERA CONTROL SIGNALS FORWARDED Control commands are immediately looped through to the camera (e.g. menu / user buttons / focus magnification / camera run & stop).SINGLE UNIT MOUNTED ONTO LENS Three captive screws keeping the single servo drive unit permanently fixed onto lens. 4 ENHANCED ZOOM MODES EB / Documentary, Live / Hardcut, Silent, and Direct ModeSingle unit mounted onto lens The CDM-LWZ3-Z2 is designed for the Zeiss Lightweight Zoom LWZ 21-100 mm/T2.9-3.9 T zoom lens (ZEISS LWZ.3). With the Zoom Servo Drive Chrosziel addresses camera operators working in the broadcast, documentary, and related sectors offering a reasonably priced device enabling creative processes that may be impossible while pulling zoom manually. The Zoom Servo Drive adds only indispensable weight to the setup. It contains one digital servo motor, the gear and a PCB with CPU in one single housing. The mounting of the Zoom Servo Drive makes the operator’s workflow comfortable. Just three captive screws are needed to mount it onto the Zeiss Lightweight Zoom (LWZ.3). Sony handgrip / other LANC handgrips with zoom rockers are working, too Zoom Servo Drive CDM-LWZ.3-Z2 with 4 enhanced zoom modes Zeiss Lightweight Zoom LWZ.3 21-100 mm/T2.9-3.9 T zoom lens (ZEISS LWZ.3) Chrosziel Light Weight Support 401-FS5 Controlled via Sony smart grip or any other LANC hand grip Until today, zoom servo drives were operated either by the inbuilt zoom rocker or external zoom devices. A second handgrip controls the camera settings or user commands. Both units are separated from each other and cannot be operated by one single hand. With the CDM-LWZ3-Z2 Chrosziel was able to unify both functionalities into one single unit. Supported are the smart grips of the Sony PXW-FS5 and Sony PXW-FS7 or any LANC compatible zoom rocker. For operation the power cable is connected and the two Jack cables with the handgrip and the camera. Once powered the zoom servo drive calibrates automatically the end stops of the lens. To further support the operator’s piece of mind Chrosziel implemented the so called “Soft Ramping”. Instead of having the zooming suddenly and unexpectedly stop, the zoom gently slows down the movement of the lens at the end stops. By using a LANC device the operator may build his or her setup, like shoulder, Steadicam or Gimbal applications. Thus, the CDM-LWZ3-Z2 makes an all-day companion for the Zeiss Lightweight Zoom LWZ.3 21-100 mm/T2.9-3.9 T zoom lens (ZEISS LWZ.3) and gives the camera operator the freedom of creativity needed. All camera control signals are forwarded Control commands (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera via the LANC protocol. By using a Sony PXW-FS5 or a Sony PXW-FS7 camera with a SWIT battery a D-Tap to a (straight or angled) Lemo compatible 5-Pin power cable is used (Chrosziel order numbers: MN-AB-A with angled Lemo compatible socket / MN-AB with straight Lemo compatible socket). The two Jack-Jack cables are forwarding the control commands from the hand grip. If e.g. a Panasonic Varicam, Sony PMW-F5 or Sony PMW-F55 are used a combined cable with power and start / stop is required, like a Hirose 4-Pin to a (straight or angled) Lemo compatible 5-Pin cable (Chrosziel order numbers: F55-A2-PCAM-A with angled Lemo socket / F55-A2-PCAM with straight Lemo compatible socket). Also, the two Jack-Jack cables are forwarding the control commands from the hand grip. Also, Chrosziel offers a variety of power cables with straight and angled plugs for all types of camera power out sockets and batteries including camera run / stop functionality (see PDF for download). LEMO compatible 0B 5-Pin socket (camera start / stop, power) 2.5 mm Jack port (control command In / Out) 3.5 mm Jack port (control command In / Out) USB type mini A-B (firmware updates) Take four: zoom servo drive zoom modes For freedom of creativity the operator may choose from four different zoom modes: EB / Documentary Mode, Live / Hardcut Mode, Silent, and Direct Mode. EB / Documentary Mode Designed for long and smooth zoom drives with the CDM-LWZ3-Z2 it offers slow creeping zoom transitions while keeping the motive perfectly framed. Silent Mode To reduce the sound of the zoom servo drive the maximum speed of its motor is limited to 40 percent making the setup almost inaudible. Live / Hardcut Mode To catch the best moments, the Live / Hardcut Mode is useful. It uses 80 percent of the maximum speed capacity of the motor offering fast zoom drives but with Soft Ramping. Direct Mode The Direct Mode finally uses the full speed capacity of the Zoom Servo Drive. The LANC commands are implemented instantaneously without ramping and smooth transitions. Useful for B camera operators catching snaps shots from the concert. How to switch zoom modes You can choose the different modes by pressing the zoom rocker for round about 25 seconds, then the green LED flashes very fast while changing the zoom mode and after that it blinks 1, 2, 3 or 4 times* – depends on the zoom mode you chose (* 1 = EB / Documentary / 2 = Silent / 3 = Live / Hard Cut / 4 = Direct). To cycle through these all you need to do is hold the zoom rocker down one way for a couple of seconds to switch to the next mode, and the other way, hold to reverse.

Zoomer the Universal Zoom Servo Drive

Zoomer the Universal Zoom Servo Drive Chrosziel has expanded the successful CDM Zoom Servo Drive family. The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-UNI-Z2 fits seamlessly into the operating functions of the Sony cameras of the FX9 / FX6 / FS7 / FS5 series. The servo drive is controlled via the zoom rocker on the handle. The motor control can be addressed via Sony's camera-specific protocol and also works independently of the camera signals when a digital LANC zoom rocker is plugged directly into the servo.Due to the included Chrosziel Flexi toothed ring (#206-30), the Zoomer can be used with almost any zoom lens even without standard cine gearing. The multi-function handgrip, which in addition to the recording function and a zoom rocker also provide control over the camera menu and other freely selectable functions, are extremely popular on current video cameras with large sensors and are indispensable for effective operation. The Chrosziel Universal Zoom Servo Drive now allows optimal use of all manual zoom lenses together with the multi-function handgrip. For this purpose, the Zoomer is slid onto a 15mm rod and swiveled onto the zoom lens. Two plug-in cables establish the connection with the camera. One cable is used for the power supply from the camera battery, the second for the connection to the control commands between the handle and the camera. When using a standard LANC zoom rocker or handle with the Sony PXW-FS5, PXW-FS7 and PXW-FS7II, the servo is connected between the handle and the camera via an input and an output jack to receive all zoom control signals. For setup with the Sony PXW-FX9 camera, a Y-cable is used that accepts the Sony multi-connector and connects to both the input jack of the Zoomer and the input jack of the camera. For the Sony ILME-FX6 camera, a Y-cable is used and connects the 3.5mm connector of the Sony handgrip, input jack of the Universal Zoom Servo Drive, and the Sony camera. FEATURESUniversal zoom motor The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via Sony and Digtial LANC handgrip The Sony FX6 / FX9 / FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rockers with digital LANC protocol are compatible too, e.g. mounted handgrip. Camera control signals forwarded Control commands are immediately looped through to the camera (e.g. menu / user buttons / focus magnification / camera run & stop). Panasonic DC-BS1H & DC-BGH1 box cameras A recent firmware updated has made the CDM-UNI-Z2 compatible with the Panasonic BS1H and BGH-1 box cinema cameras when used with a Manfrotto MVR901EPLA and MVR901ECLA control handles as well as the digital LANC Libec ZFC-L and ZC-LP zoom controllers. Technical dataPower supply 10-30V (Lemo compatible 0B 5-pin) 2.5mm socket (control command In) 3.5mm socket (control command In&Out)USB Type min A-B (firmware updates) Torque 0.5Nm Power consumption max. approx. 350mAh @ 12VIN THE BOX 1x CDM-UNI-Z2 Digital motor unit 1x LANC cable 1x LANC extension cable 1x MN-AB-A90 (power supply cable 12 Volt A/B D-Tap – angled 90° rotated 0B 5pin) 1x 206-30 Flexi Gear Ring (Ø 60-120mm) 1x Gear Drive, mod. 0.8 (Ø 40mm) 1x CAB-FX9 for Sony PXW-FX9 compatibility 1x CAB-FX6 for Sony PXW-FX6 compatibility USB Mini AdapterSign up for ZOOMER email updatesDon't miss future news about the ZOOMER and subscribe to the Zoomer Email list. Yes, keep me updated about the ZOOMER and send me future news about it.NOTE: we will not use your email for any other emails not related to the Zoomer. hbspt.forms.create({ region: "na1", portalId: "2769585", formId: "aae38178-6132-4e21-b6b4-bd9ac7e2828f" });