Filter
Bridge Plate DigiCine, Ø19mm CF
Bridge Plate with Ø19mm carbon rods, L= 500mm, for Sony F23, F35, F65 and with LWS as adaptor for Red Epic / Scarlet, Canon C300, C100, C500 and wth LWS 401-450HD for all cameras wth an optical axis height between 45 and 66 mm.

€1,025.00*
Chaos Cable Ties
Adjustable Cable Ties With Multiple Mounts.One of the little things that makes life easier on setSet with 12 pcs "Chaos Cable Ties"4x 1/4" thread4x 3/8" thread 4x stickytapeOrganize your cables on your camera set with our Chaos Cable Ties. These adjustable, reusable ties are great for managing cable on set. they also reduce cable strain as they keep the cable from sliding through unlike other ties.  The set comes with 4 ties that have a 3/8th thread and 4 that have 1/4-20 thread to attached to cages and organize cables around the camera they way you want. Because of the thread, you can use them again and again. No threaded mount points available? Chrosziel has you covered with 4 adhesive Chaos Cable Ties in the set. 

€37.00*
Lens support Zeiss DigiZoom, Angenieux Rouge, Fuji Cabrio
Lens Support Bracket for Zeiss DigiZoom + Angenieux Rouge Optimo + Cabrio 19-90 lenses for mounting on Ø 15mm LWS rods

€381.00*
LWS 15 HD Allround
LWS - Light Weight Support 15 HD Allround, w. Ø 15mm rods L. 310mm, double rod guidance and clamp, adjustable for any camera with optical height betw. 26.5 a. 72.5mm (distance betw. lens center and camera bottom). Spacers (pairs) of 1, 2, 4, 8, 2 x 16mm, set of screws, table with camera heights and Allen wrench are included. (All Chrosziel camera platforms of series 401-4xx may be used alternatively.)Adjustable for any camera with optical height betw. 26.5 a. 72.5mm (distance betw. lens center and camera bottom) For e.g.: Sony PMW-F3, F5/F55, FS 100/FS 700, Canon EOS C100/C300/C500 series cameras (MKI, II, III) Ø 15mm rods, length 310mm, double rod guidance and clamp

€443.00*
Mattebox and Light Weight Support Kit allround
Kit MB 450R2 + LWS-15 HD Allround: 450-R2 MatteBox with french flag (450-11), pivot-mech. for optional side-wings, 2 rotating filterholders: 4x4 (402-12)+ multi 4x4/4x5.650 (410-04), bracket for Ø15mm rods, end plate w. thread Ø114/110mm 450-20 Flexi-Insertring 110:75/98mm 450-22 Flexi-Insertring 110:50/85mm 401-450HD LWS-15 HD Allround

€1,669.00*
MatteBox MB 415 100mm, complete
Compact MatteBox 4:3 +16:9 F4.5 = CLWAH-F4.5 incl. French Flag + CF-MB/F4.8 w. 2 Filterholder 1x fixed multi-format 4x4/4x5.650 (410-31) a. 1x rotatable multi-format 5x5/4x5.650 (510-01), Bracket for Ø 15mm LWS rods, Ret. Ring Ø100mm

€1,927.00*
MatteBox MB 415 110mm, complete
The Chrosziel MB 415 Wide Angle Matte Box mounts on your 15mm LWS setup to prevent lens flares on lenses as wide as 11mm. The MB 415 features a dual-stage construction, with a rear rotating stage. A 110mm bellows on the back of the matte box mounts to the outside of your lens, and can even accept a circular screw-in filter in addition to the two other stages. A top flag is included for controlling the amount of extra light blockage depending on your setup. Using the 15mm clamp, the MB 415 will mount to a 15mm LWS setup. For 19mm studio setups, an adapter can be purchased separately.What's in the Box:Compact MatteBox 4:3 +16:9 F4.5 = CLWAH-F4.5French Flag1x fixed multi-format 4x4/4x5.650 (410-31)1x rotatable multi-format 5x5/4x5.650 (510-01), Bracket for Ø 15mm LWS rods, Ret. Ring Ø110mm

€1,927.00*
MatteBox MB 415 95mm, complete
The Chrosziel MB 415 Dual-Stage Wide-Angle 4 x 5.65" Matte Box mount on a 15mm LWS setup to prevent lens flares on lenses as wide as 11mm (in Super 35) for both 16:9 and 4:3 aspect ratios. The MB 415 features a dual-stage construction with a rear rotating stage. A folding top flag is included for controlling the amount of extra light blockage depending on your setup. The 15mm bracket mounts on a 15mm LWS rod setup, and a 19mm adapter can be purchased separately for studio setups. This matte box requires separately available rubber bellows or lens donut.What's in the Box:Compact Matte Box 4:3 +16:9 F4.5 = CLWAH -F4.5French Flag + CF-MB/F4.8  1x fixed filter holder multi-format 4x4/4x5.650 (410-31)1x rotatable filter holder multi-format 5x5/4x5.650 (510-01)Bracket for Ø 15mm LWS rodsRet. Ring Ø95mm (410-14F)

€1,860.00*
Rear Rod Clamp for Light Weight Support
Rear Rod Clamp for Light Weight Support, ideally suited for: 401-FX9401-FX6401-FS7401-FS5401-C70401-C500II401-C300III401-C700 Light Weight Supports.INCLUDED IN BOX1x Rear Rod Clamp for Light Weight SupportOne Pair of Steel Rods: Diameter: 15mm, Length: 100mm

€107.00*
Set of Pivot Rods for side wings f. MB415, 805, 565, SD412
Set of Pivot Rods for SideWings, for MB 415, MB 805/840, SD 412 (L. 116mm incl. screws and washers)

€124.00*
Set of SideWings for MB 415, MB 805, SD 412, MB 565
Set of SideWings for MB 415, MB 805, SD 412, MB 565

€398.00*
Top Bridge DigiCine, Ø19mm CF
Only Top Bridge of Bridge Plate F235 incl. Ø 19 mm carbon Rods, L=500 mm

€639.00*
Universal Lens support, Quick-fit for Ø 15mm rods
Lens Support Bracket 15 Universal with two support stands with length 14 and 27 mm, combinable for all lenses with 1/4" and 3/8" threads. With QuickFit device for Ø 15mm rods.

€381.00*