Go to homepage

Canon EOS C500

Canon EOS C500


Filter
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods Bridge Plate incl. Ø19mm Rods, l. 440mm (for combination with QuickLock Tripod Plates 401-120/401-130 )
Clamp-On CINE.1 MatteBox MB 565 Double
Clamp-On CINE.1 MatteBox MB 565 Double
Clamp-On CINE.1 MatteBox MB 565 Double The completely modular Cine.1 Matte Box from Chrosziel is built to be strong yet lightweight to fit into your handheld or studio camera rig. Having a matte box on the front of your lens allows you more flexilbility in lighting your scene by blocking light sources just out of frame from directly entering the lens, which can cause the lens to flare, and introduce image artifacts. This particular iteration of the Cine.1 series can be mounted directly on the lens with the integrated clamp, and is configured with two filter stages, however, it can be configured to hold either one or three filters with addition or removal of filter stages.What's in the Box: CINE.1 MatteBox MB 565 Double, for Cine Full Frame camerasClamp adapter with Ø 150mm 501-26French Flag 501-062 Filterholders multiformat 5.65x5.65/ 4x5.650, each independently 360°rotating
Flexi-Insertring Ø 130 clamp-on
Flexi-Insertring Ø 130 clamp-on
Flexi-Insertring Ø 130 clamp-on Flexi-Insertring for clamp-on-mount Ø 130mm for lens diameter 95 to 125mm. Accessory for MB 456 Academy on rods.
Focus Drive mod 0.8, Ø46,4mm
Focus Drive mod 0.8, Ø46,4mm
Focus Drive mod 0.8, Ø46,4mm Focus Drive for Cine Style and 35mm Film lenses for Studio Rig, mod 0.8, Ø 46,4mm, w 8 mm (teeth 56)
Focus Drive mod 0.8 - Ø 25,6mm
Focus Drive mod 0.8 - Ø 25,6mm
Focus Drive mod 0.8 - Ø 25,6mm Focus Drive for Video prime lenses and Cine Style, for Studio Rig, mod 0.8 - Ø 25,6 mm, w 8mm (teeth 30)
Focus Drive mod 0.8, Ø 36.8mm
Focus Drive mod 0.8, Ø 36.8mm
Focus Drive mod 0.8, Ø 36.8mm Focus Drive for CineStyle, DigiPrime lenses for Studio Rig mod 0.8, Ø36.8mm, width 8 mm, teeth 44
Handle Bar proVideo plus
Handle Bar proVideo plus
Handle Bar proVideo plus Handle Bar plus proVideo (w. 220mm), for use with LWS. With clamp forØ 15mm rods
Lensport Iris Motor for cine lenses and Hirose 12pin output cameras
Lensport Iris Motor for cine lenses and Hirose 12pin output cameras
Lensport Iris Motor for cine lenses and Hirose 12pin output cameras Universal Lensport Iris Motor for cine lenses in Broadcast / ENG Run& Gun setups The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-LP-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter.The Chrosziel Lensport Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera. Compatibility: The Universal Iris Motor has been successfully tested with the following cameras (manual and automatic iris control): ARRI Amira Blackmagic URSA Broadcast G2 & URSA Mini Pro 12K Canon C300/500 with EU-V2 expansion unit Panasonic AK-PLV100 Sony F5/F55 with LA-FZB1 adapter Sony Venice Sony E-Mount cameras with Chrosziel MetaMount MA-EPL-HR12 Manual Passive Mode: For temporary manual control, the motor can be set to passive mode. Simply press the motor button once briefly and the motor can be rotated freely. Once the button is pressed again, the motor is back in Active mode and controlled by the camera. Metadata:For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready! FEATURESUniversal Iris motor The Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via any Hirose 12pin camera outputThe camera's Hirose 12pin Lensport output controls directly the Iris motor unit. Remote Iris and AutoIris controlUse the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control.
MagNum on/off LANC
MagNum on/off LANC
MagNum on/off LANC MagNum camera start/stop cable Lemo 0B 9pin - 2,5mm jack for LANC (TM) connection (div. cameras)
MatteBox MB 456 Academy Double
MatteBox MB 456 Academy Double
MatteBox MB 456 Academy Double The Chrosziel Matte Box 456-20 Academy (2 Filter Holders) consists of a 456-R20 matte box, French flag, a filter stage for two individually rotating filter holders, two 4 x 5.65"/5 x 5" filter holders, a 130mm clamp-on rear plate, and a bracket for 15mm lightweight support rods. It is ideal for use with handheld and studio production cameras.The 456-R20 Matte Box offers a wide angle (16:9/4:3) housing for lenses as wide as 12mm (35mm Academy) and eliminates the effects of vignetting. Equipped with a filter stage for two independently rotating 4 x 5.65"/5 x 5" filter holders, the matte box provides sufficient space for adjusting the position of filters.Provided with a French flag, the Matte Box 456-20 Academy controls the angle of light and eliminates lens glare and flare. It can be coupled with optional side wings for accurate light adjustment. The kit includes a 130mm clamp-on rear plate and a bracket for use with 15mm lightweight support rods (optional).With optional bridge plate adapters, you can interface the kit with 15 or 19mm bridge plate rods. An optional swing-away bracket, attached to the back of the matte box housing, allows for quick and efficient lens changes.What's in the Box: Matte Box 456 Academy Double, for full frame cameras, with Double-Rotating Filter StageFrench flag (402-26)2 filter holders multiformat 5x5/4x5.650 (510-01)16:9 (416-03) matte insertBracket for Ø15mm rods and clamp adaptor Ø130mm
MultiPad 15
MultiPad 15
MultiPad 15 MultiPad 15 Adjustable ShoulderPad complete with MultiPad 15 Straight and Side Lock for use with Ø 15 mm rods. Pad mounts under the camera, behind or sidewards for cameras with viewfinder in the body.
QuickFit Lens support for dia. 15 +19 mm rods
QuickFit Lens support for dia. 15 +19 mm rods
QuickFit Lens support for dia. 15 +19 mm rods Universal 15 + 19mm Lens Support Bracket with 3 support stands, intercombinable, lenght 14, 27 and 35 mm, for lenses w. 1/4" + 3/8" threads. With QuickFit device for Ø15 + 19mm rods.
Step-down Ring Ø 130:114mm for MB456, MB450 and SD412
Step-down Ring Ø 130:114mm for MB456, MB450 and SD412
Step-down Ring Ø 130:114mm for MB456, MB450 and SD412 Step-down Ring Ø 130:114mm For Chrosziel 450W-20, 456-20 & 456-30 Matte Boxes and SD412 (412-02F130 only) Sunshade, and for Use with Zeiss Compact Prime, Sony PL-Mount Prime & Angenieux Optimo DP Rouge Zoom Lenses
Step-down ring Ø 150:110mm f. MB565
Step-down ring Ø 150:110mm f. MB565
Step-down ring Ø 150:110mm f. MB565 Step-down ring Ø 150:110mm for the MB 565 mattebox 
Step-down Ring Ø150:104mm MB 565
Step-down Ring Ø150:104mm MB 565
Step-down Ring Ø150:104mm MB 565 Step-down Ring Ø 150:104mm for the MB 565 matte box
Step-down Ring Ø150:114mm f.MB 565
Step-down Ring Ø150:114mm f.MB 565
Step-down Ring Ø150:114mm f.MB 565 Step-down Ring Ø 150:114mm for the MB 565 mattebox
Step-down Ring Ø150:130mm f.MB 565
Step-down Ring Ø150:130mm f.MB 565
Step-down Ring Ø150:130mm f.MB 565 Step-down Ring Ø150:130mm for the MB 565 mattebox
Step-down Ring Ø150:134mm MB 565
Step-down Ring Ø150:134mm MB 565
Step-down Ring Ø150:134mm MB 565 Step-down Ring Ø150:134mm MB 565
Step-down Ring Ø150:136mm MB 565
Step-down Ring Ø150:136mm MB 565
Step-down Ring Ø150:136mm MB 565 Step-down Ring Ø 150:136mm f. MB 565
Universal Lens support, Quick-fit for Ø 15mm rods
Universal Lens support, Quick-fit for Ø 15mm rods
Universal Lens support, Quick-fit for Ø 15mm rods Lens Support Bracket 15 Universal with two support stands with length 14 and 27 mm, combinable for all lenses with 1/4" and 3/8" threads. With QuickFit device for Ø 15mm rods.
This website uses cookies to ensure the best experience possible. More information...