C-lens mount adapter for projector with CLC-base mount (e.g. P-TP7).

Power Cable D-Tap - Fujinon 20 pin Hirose power in

cable for power supply and data connection from camera lens port (12pin Hirose) to Fuji XK/ZK lenses (20pin Hirose)

Cage for Dream Chip ATOM one SSM500, compatible with both B4- and C-Mount Version, with 3/8" and 1/4" anti-twist threads, top handle 401-HANDLE, sensor plane marker and tripod plate.

Chrosziel further expands its successful CDM Zoom Servo Drive family The FR7 zoom motor unit CDM-SFR fits seamlessly into the operating functions of the Sony PTZ ILME-FR7 camera. The FR7 Zoom Servo Drive is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on the 15mm rods of the Sony PTZ head. The servo drive is controlled via the Option port of the Sony ILME-FR7. The motor control can be addressed via Sony's camera-specific protocol and therefore can be used seamlessly with the whole ecosystem of the Sony FR7.Due to the included Chrosziel Flexi toothed ring (#206-30), the CDM-SFR can be used with almost any zoom lens even without standard cine gearing. This opens up a complete new range of lenses to cover the creatives needs from wide angle lenses to long-zoom operation.The FR7 Zoom servo drive unit is slid onto the 15mm rod and swiveled onto the zoom lens. The curly cables ensure safe operation within the full tilt and pan range of the Sony ILME-FR7. The tiny distribution box is mounted to the side of the FR7 base and has a built-in power input. Simply unplug the power supply of the FR7 and plug it into the distribution box. Then plug the power plug of the distribution box into the power input of the Sony FR7. Connect the RJ45 connector of the distribution box into the OPTION port of the cameras base unit (do not connect to the Ethernet port since you need this for the ILME-FR7 communication). Done.FEATURESUniversal zoom motor The CDM-SFR is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on the 15mm rod. Controlled via Sony ILME-FR7 The Sony ILME-FR7 base unit controls directly the servo drive unit. What ever remote panel or web access you use to control the Sony ILME-FR7, the zoom motor will receive its signal directly from the base unit of the FR7.No extra cables or power supply neededThe CDM-SFR inherits all cables, clamps, distribution box and plugs to use it right out of the box with the Sony ILME-FR7. No extra power supply needed. Technical dataPower IN 19.5V (Sony ILME-FR7 power supply used) Power OUT (Sony ILME-FR7 power plug, same voltage as power in passed through)RJ45 plug (control command In (OPTION port)) Torque 0.5Nm Power consumption max. approx. 10Wproduct code CDM-SFR EAN/GTIN number: 4250618848648 IN THE BOX 1x CDM-SFR Digital motor unit 1x 206-30 Flexi Gear Ring (Ø 60-120mm) 1x Gear Drive, mod. 0.8 (Ø 30mm)

401-BUR-ADV-KIT: THE COMPLETE LWS CAGE FOR THE SONY BURANOThe Chrosziel Advance Cage Kit fitted for the Sony Burano is a slim, lightweight yet sturdy cage that allows access to all camera controls and ports while adding dozens of mounting points for essential gear and accessories the camera needs for filming. The Advanced cage kit is perfect for run-n-gun shooting, live event broadcasting or tripod mounted studio work.  Fitted LWS Baseplate with VCT mount, shoulder pad and 15mm rod mounts, a pair of 20 cm rods in is included Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points and a pair of 9cm rods included. Top plate has removeable center so FX9 handle with built in electronics can be used Right and Left front side brackets with more mounting points Rear right side bracket that secures to the top plate and the camera with 2 extra screws to support heavier accessories The 401-BUR-ADV-KIT Chorsziel Cage Consists of: 1x 401-VEN  LWS base plate with integrated shoulder pad 1x 401-BUR-TOP  Top plate with 15mm rods 1x 401-BUR-SBF  Front side bracket right 1x 401-BUR-SBL Front side bracket Left 1x 401-BUR-SBR  Rear side bracket 

Chrosziel Cine Bridge Plate Kit for Sony Venice 2 consists of: Top Bridge 401-VEN-BRI, Bridge plate 401-121-02, cage brackets left and right, and top plate.

Sony Burano, Venice 2 and Venice Cine Bridgeplate with 19mm and 15mm rods for use with Bridge plates.

Chrosziel Front-Side-Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8". The front-side-plate is attached to the Chrosziel top plate (401-BUR-TOP) and to the light weight support (401-VEN) or bridge plate (401-VEN-BRI).401-BUR-SBF: THE SONY Burano Front Side BracketThe Front Side Bracket comes with numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard. It is mounted with two screws into the Chrosziel 401-BUR-TOP top plate and additionally into the two threading of the Chrosziel Light Weight Support 401-VEN or Chrosziel Bridge Plate 401-VEN-BRI. Front Side Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8" threads mounted on the Chrosziel 401-BUR-TOP top plate and the two threading of the Chrosziel 401-VEN or 401-VEN-BRI

AtomOne SSM500 LWS-KIT consists of: Shoulder support 401-SSM500, 2x cage brackets front and rear, 2x side plates, top plate and handleCompatible with both B4- and C-Mount Version

Chrosziel Light weight support for Dreamchip Atom One SSM500 camera, compatible with both B4- and C-Mount Version, with integrated shoulder pad, 2 rosettes, 401-FS7/5-03 Tripod Adapter Plate, rear rods optional (401-FS7-5R-01)

Chrosziel Light weight support for Sony Burano, Venice 2 and Venice camera, with integrated shoulder pad, 2 rosettes, 401-FS7/5-03 Tripod Adapter Plate, rear rods optional (401-FS7-5R-01)

Sony Venice 2 LWS-KIT consists of: Shoulder support 401-VEN, cage brackets left and right, and top plate.

Chrosziel Rear-Side-Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8". The rear-side-plate is attached to the Chrosziel top plate (401-BUR-TOP) and to the body-owned two threadings.401-BUR-SBR: THE SONY Burano Rear Side BracketThe Rear Side Bracket comes with numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard. It is mounted with two screws into the Chrosziel 401-BUR-TOP top plate and additionally into the two threading of the Sony Burano camera body. Rear Side Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8" threads mounted on the Chrosziel 401-BUR-TOP top plate and the two threading of the Sony Burano camera body

401-BUR-STD-KIT: THE LWS RUN-N-GUN CAGE FOR THE SONY BURANOThe Chrosziel Standard Cage Kit fitted for the Sony Burano is a slim, lightweight yet sturdy cage that allows access to all camera controls and ports while adding dozens of mounting points for essential gear and accessories the camera needs for filming. The Advanced cage kit is perfect for run-n-gun shooting, live event broadcasting hand-held or tripod mounted.  Fitted LWS Baseplate with VCT mount, shoulder pad and 15mm rod mounts, a pair of 20 cm rods in is included Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points and a pair of 9cm rods included. Top plate has removeable center so FX9 handle with built in electronics can be used  The 401-BUR-ADV-KIT Chorsziel Cage Consists of: 1x 401-VEN  LWS base plate with integrated shoulder pad 1x 401-BUR-TOP  Top plate with 15mm rods 

Chrosziel Top-Plate for Sony Burano, built-in Ø15mm rod support, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm / 3.55inch with internal thread (extendable). The top-plate is split into two parts allowing the use of either the standard Sony Burano Top Handle or the Sony FX9 Top Handle with built-in electronics for maximum Run&Gun shooting.401-BUR-TOP: THE CHERRY ON THE SONY Burano “CAKE”The Top Plate comes with rod support in standard optical height, numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard and an optical marker for attaching a measuring tape. Additionally the top plate inherits various mounting points to move the Sony Burano cable clamps to the desired position. Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm /3.55inch with internal thread (extendable) top-plate split into two parts for the standard Sony Burano Top Handle or the Sony FX9 Top Handle with built-in electronics

Combined cable Power Lemo-comp. 0B 2pin connector and Start/Stop for Broadcast Lenses with 12 pin Hirose Lensport connection, control by LANC Interface

Combined cable for MetaMount / Magnum for LANC Camera Run/Stop and D-Tap Power (2.5mm Jack, D-Tap, Lemo compatible 0B5)

Combined cable for Sony LA-EB1 or Hirose 4pin for LANC Camera Run/Stop and D-Tap Power (2.5mm Jack, D-Tap, Hirose 4pin)

Gear Drive for Chrosziel Motor CDM-100/S/M, mod. 0.8, Ø 24mm

Lens Test Chart / Reticle (Otto Nemenz Design) 65mm for projector P-TP7II and P-TPCXPL for visual  inspection of lenses on Cine and Single Chip sensors, with Siemensstars, line pairs and format markings, anti-twist safeguard.

Lens Test Chart / Reticle HDTV 16:9 and Standard Definition 4:3 for projector P-TP7and P-TPCXPL for visual inspection of HD / SD lenses, with Siemensstars, line pairs andformat markings , anti-twist safeguard.

Universal Lensport Iris Motor for cine lenses in Broadcast / ENG Run& Gun setups The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-LP-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter.The Chrosziel Lensport Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera. Compatibility: The Universal Iris Motor has been successfully tested with the following cameras (manual and automatic iris control): ARRI Amira Blackmagic URSA Broadcast G2 & URSA Mini Pro 12K Canon C300/500 with EU-V2 expansion unit Panasonic AK-PLV100 Sony F5/F55 with LA-FZB1 adapter Sony Venice Sony E-Mount cameras with Chrosziel MetaMount MA-EPL-HR12 Manual Passive Mode: For temporary manual control, the motor can be set to passive mode. Simply press the motor button once briefly and the motor can be rotated freely. Once the button is pressed again, the motor is back in Active mode and controlled by the camera. Metadata:For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready! FEATURESUniversal Iris motor The Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via any Hirose 12pin camera outputThe camera's Hirose 12pin Lensport output controls directly the Iris motor unit. Remote Iris and AutoIris controlUse the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control.

MagNum Hand Unit Monitor Mount - for mounting monitor on MagNum Hand Unit. Angle continuously adjustable, rosettes vertically adjustable.