CF carbon rods (set of 2) for lightweight support, Ø15mm, length 500mm De Luxe version: Ground to 2/100 mm precision, with thread for extensions, weight 105 g (pair).
401-BUR-ADV-KIT: THE COMPLETE LWS CAGE FOR THE SONY BURANOThe Chrosziel Advance Cage Kit fitted for the Sony Burano is a slim, lightweight yet sturdy cage that allows access to all camera controls and ports while adding dozens of mounting points for essential gear and accessories the camera needs for filming. The Advanced cage kit is perfect for run-n-gun shooting, live event broadcasting or tripod mounted studio work.
Fitted LWS Baseplate with VCT mount, shoulder pad and 15mm rod mounts, a pair of 20 cm rods in is included Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points and a pair of 9cm rods included. Top plate has removeable center so FX9 handle with built in electronics can be used Right and Left front side brackets with more mounting points Rear right side bracket that secures to the top plate and the camera with 2 extra screws to support heavier accessories
The 401-BUR-ADV-KIT Chorsziel Cage Consists of: 1x 401-VEN LWS base plate with integrated shoulder pad 1x 401-BUR-TOP Top plate with 15mm rods 1x 401-BUR-SBF Front side bracket right 1x 401-BUR-SBL Front side bracket Left 1x 401-BUR-SBR Rear side bracket
Chrosziel Cine Bridge Plate Kit for Sony Venice 2 consists of: Top Bridge 401-VEN-BRI, Bridge plate 401-121-02, cage brackets left and right, and top plate.
Chrosziel Front-Side-Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8". The front-side-plate is attached to the Chrosziel top plate (401-BUR-TOP) and to the light weight support (401-VEN) or bridge plate (401-VEN-BRI).401-BUR-SBF: THE SONY Burano Front Side BracketThe Front Side Bracket comes with numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard. It is mounted with two screws into the Chrosziel 401-BUR-TOP top plate and additionally into the two threading of the Chrosziel Light Weight Support 401-VEN or Chrosziel Bridge Plate 401-VEN-BRI.
Front Side Bracket for Sony Burano, with integrated mounting points
1/4" and 3/8" threads
mounted on the Chrosziel 401-BUR-TOP top plate and the two threading of the Chrosziel 401-VEN or 401-VEN-BRI
AtomOne SSM500 LWS-KIT consists of:
Shoulder support 401-SSM500, 2x cage
brackets front and rear, 2x side
plates, top plate and handleCompatible with both B4- and C-Mount Version
Chrosziel Light weight support for Dreamchip Atom One SSM500
camera, compatible with both B4- and C-Mount Version, with integrated shoulder pad, 2
rosettes, 401-FS7/5-03 Tripod Adapter Plate, rear rods optional
(401-FS7-5R-01)
Chrosziel Rear-Side-Bracket for Sony Burano, with integrated mounting points 1/4" and 3/8". The rear-side-plate is attached to the Chrosziel top plate (401-BUR-TOP) and to the body-owned two threadings.401-BUR-SBR: THE SONY Burano Rear Side BracketThe Rear Side Bracket comes with numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard. It is mounted with two screws into the Chrosziel 401-BUR-TOP top plate and additionally into the two threading of the Sony Burano camera body.
Rear Side Bracket for Sony Burano, with integrated mounting points
1/4" and 3/8" threads
mounted on the Chrosziel 401-BUR-TOP top plate and the two threading of the Sony Burano camera body
401-BUR-STD-KIT: THE LWS RUN-N-GUN CAGE FOR THE SONY BURANOThe Chrosziel Standard Cage Kit fitted for the Sony Burano is a slim, lightweight yet sturdy cage that allows access to all camera controls and ports while adding dozens of mounting points for essential gear and accessories the camera needs for filming. The Advanced cage kit is perfect for run-n-gun shooting, live event broadcasting hand-held or tripod mounted.
Fitted LWS Baseplate with VCT mount, shoulder pad and 15mm rod mounts, a pair of 20 cm rods in is included Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points and a pair of 9cm rods included. Top plate has removeable center so FX9 handle with built in electronics can be used
The 401-BUR-ADV-KIT Chorsziel Cage Consists of: 1x 401-VEN LWS base plate with integrated shoulder pad 1x 401-BUR-TOP Top plate with 15mm rods
Chrosziel Top-Plate for Sony Burano, built-in Ø15mm rod support, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm / 3.55inch with internal thread (extendable). The top-plate is split into two parts allowing the use of either the standard Sony Burano Top Handle or the Sony FX9 Top Handle with built-in electronics for maximum Run&Gun shooting.401-BUR-TOP: THE CHERRY ON THE SONY Burano “CAKE”The Top Plate comes with rod support in standard optical height, numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard and an optical marker for attaching a measuring tape. Additionally the top plate inherits various mounting points to move the Sony Burano cable clamps to the desired position.
Top-Plate for Sony Burano, built-in Ø15mm rod attachment, with integrated mounting points
1/4" and 3/8", pair of Ø15mm rods - 9cm /3.55inch with internal thread (extendable)
top-plate split into two parts for the standard Sony Burano Top Handle or the Sony FX9 Top Handle with built-in electronics
Light weight support (LWS) and top plate for Sony PXW-FX9: LWS with integrated shoulder pad, 2 rosettes, V-Lock-Plate, 401-FS7/5-03 Tripod Adapter Plate, 2 rods Ø 15mm, length 205mm Top plate with Ø15mm rod attachment, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm / 3.55inch with internal thread (extendable)
Handgrip Extender with bayonet lock for Sony PXW-FX6, extendable from 175 to 250mm, incl. extension cable, length 300mm, Hirth-Rosette with screws. For use with Chrosziel LWS 401-FX6 or directly on the camera with included Hirth-Rosette.
Hirth-Rosette for Sony ILME-FX6, mounted inside the bayonet lock of FX6 handgrip . For use with Chrosziel 403-FX6 handgrip extension or Hirth-Rosette accessories.
Light weight support (LWS), Cage and handles for Canon EOS C70: LWS with integrated shoulder pad, 2 rosettes, V-Lock-Plate, Tripod Adapter Plate, 2 rods Ø 15mm, length 205mm. Cage with integrated anti-twist mounting points 1/4" and 3/8". Handle with anti-twist connector and additional integrated anti-twist mounting points 1/4" and 3/8".
LWS - Light Weight Support 15 HD for Sony F3 camera, w. Ø 15 mm rods L. 310 mm, double rod guidance and clamps. Also for combination with Bridgeplate Cine with Ø 19mm rods (e.g. 401-F235, BP-8).
