Clamp-On CINE.1 MatteBox MB 565 Double
Clamp-On CINE.1 MatteBox MB 565 Double The completely modular Cine.1 Matte Box from Chrosziel is built to be strong yet lightweight to fit into your handheld or studio camera rig. Having a matte box on the front of your lens allows you more flexilbility in lighting your scene by blocking light sources just out of frame from directly entering the lens, which can cause the lens to flare, and introduce image artifacts. This particular iteration of the Cine.1 series can be mounted directly on the lens with the integrated clamp, and is configured with two filter stages, however, it can be configured to hold either one or three filters with addition or removal of filter stages.What's in the Box: CINE.1 MatteBox MB 565 Double, for Cine Full Frame camerasClamp adapter with Ø 150mm 501-26French Flag 501-062 Filterholders multiformat 5.65x5.65/ 4x5.650, each independently 360°rotating
DV StudioRig Kit in Case, Follow Focus with all gears
Flexi-Insertring 110:75/98mm for MB450 Mattebox
Flexi-Insertring 110:75/98mm for MB450 Mattebox The Chrosziel Flexi-Ring Flexible Step-Down Ring is a 110 to 75-98mm adjustable step-down ring. The ring is designed to work with the MB-450 matte box series and provide light protection for a variety of wide angle and standard lenses with diameters of 75 to 98mm
MagNum Mini KIT 1-Channel with Chrosziel Motor CDM-100S
MagNum Mini KIT 1-Channel with Chrosziel Motor CDM-100S MagNum Mini KIT with CDM-100S, Single Channel Lens Control for Focus, 2.4 GHz, Camera RUN start/stop, Spectrum analyzer, incl.: MN-MINI-R Receiver/Motor Controller with antenna (FANT-G), MN-100T Transmitter (hand unit) w. hand strap and neck strap (STR2), CDM-100S Digital Chrosziel Motor, compl., MN-RMB1 mounting bracket f. receiver, MN-BAT Battery type FM50, MN-CH Charger, MN-AB Power cable D-Tap, MN-CASE hard case, manual.
MagNum Mini Superior KIT 1-ch. with Chrosziel Motor CDM-100S
MagNum Mini Superior KIT 1-ch. with Chrosziel Motor CDM-100S MagNum Mini Superior KIT with CDM-100S, Single Channel, Lens Control for focus, 2.4 GHz, with VariLock II a. VariFluid Hand wheel, DMX-Signal Input, Power Booster, camera RUN start/stop, Spectrum analyzer, incl.: MN-MINI-R Receiver/Motor Controller with antenna (FANT-G), MN-150T Transmitter (hand unit) w. hand strap and neck strap (STR2), CDM-100S Digital Chrosziel Motor, compl., MN-RMB1 Mounting bracket f. receiver, MN-BAT Battery type FM50, MN-CH Charger, MN-AB Power cable D-Tap, MN-CASE hard case, manual.
MatteBox MB 415 95mm, complete
MatteBox MB 450W Super Wide
MatteBox MB 450W Super Wide MatteBox 450W Super Wide MatteBox for Wide-Angle lenses, with double-rotating Filter Stages The Chrosziel MB 450W Super Wide Matte Box is a lightweight, yet robust, carbon fiber matte box for professional cinema and video cameras. The "Super Wide" design allows for full frame lenses as wide as 20mm to be used. 1/3"-chip camcorders can use as wide as 2.6mm focal length setting without vignetting. 1/2"-chip camcorders can use down to 3.6mm. Use the included top flag to control glare and reflections for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side and bottom flags.Both filter stages accept 4x4" and 4x5.65" filters and rotate for use and control of polarizing as well as graduated filters. To use this matte box on your camera, the camera must be mounted on a separately available 15mm LWS baseplate. Fit the matte box on the rods until it covers the lens front. Rod-mounted matte boxes are preferred over clamp-on matte boxes in many production situations as they are always properly aligned with the image horizon.What's In The Box: MB450W MatteBox French flag (450-11)2 filter holders multiformat 4x4/4x5.650 (410-31), bracket for Ø15mm rodsclamp adapter Ø130mm
MatteBox MB 456 Academy Double
Swing-Away MatteBox Kit MB 565 Triple for 15 mm rods
Swing-Away MatteBox Kit MB 565 Triple for 15 mm rods Swing-Away MatteBox Kit MB 565 Triple 15, for Cine FullFrame cameras, includes: *Clamp adapter with Ø 150mm 565-00-SW15: Swing-Away arm for Ø 15mm rods 501-26: French Flag 510-07: 3 Filterholder comb. 4x5.650hor./4x4, each independently rotating 360° 565-00-12: Pivot mechanism (left/right ) 410-200: 1 set of side wings 510-11: 1 set of rosettes for handles 565-00-11: Accessory bar w. adjust. slider 510-19: Filter tray catcher 510-54: FlexiBellows 565-CASE: Case with insert