Canon

DV StudioRig Kit in Case, Follow Focus with all gears

DV StudioRig Kit in Case, Follow Focus with all gears DV StudioRig plus complete Kit with six gear drives in Case. Consisting of: 206-60S follow focus w. VariLock handwheel, 205-02 scale and gear drives: 206-12, 206-13, 206-14, 206-15, 206-16, 206-17 in Case

DV StudioRig, follow focus

DV StudioRig, follow focus DV StudioRig, follow focus incl. scale (205-02), for one-side-operation. For lens diameter max. 115 mm measured with gear drive 206-12 (not included). Precise gears with practically no play at a very affordable price. A single lock for rod and extension clamp makes changing of lenses quick. Hand wheel with fine-structured surface for save grip. The scale is easy to change and the reference marking is adjustable for the operator or the assistant. Gear drives and gear rings for the different lenses ensure precise adjustments and can be mounted without tool on both sides of the gear unit

Flexi-Insertring Ø 130 clamp-on

Flexi-Insertring Ø 130 clamp-on Flexi-Insertring for clamp-on-mount Ø 130mm for lens diameter 95 to 125mm. Accessory for MB 456 Academy on rods.

Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm

Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm Focus drive (for 206-05S + 206-60S), mod 0.8, for gear rings and Canon and Fujinon cine style lenses, Ø 36.8mm, 44 teeth.

Insertring Ø 114 mm for Retaining Ring

Insertring Ø 114 mm for Retaining Ring Insertring Ø 114 mm for Retaining Ring (spare)

MagNum 2 channel lens control

MagNum 2 channel lens control MagNum lens control for focus, iris and camera record start/stop, several frequencies in the range of 2,4 GHz a. 433 MHz. USB port, serial interface, BNC socket for cable or antenna, hotkeys. Compatible also for wired analogue zoom demands. Scope of delivery: operating unit/transmitter w. hand strap (MN-200T), motorcontrol unit/receiver (MN-200R), 2 antennas, battery type FM50/55, charger, neck strap, manual (add. needed: cables, bracket and digital motors)

MagNum KIT 2-Channel with Chrosziel Motors CDM-100

MagNum KIT 2-Channel with Chrosziel Motors CDM-100 MagNum KIT 2-Channel with Chrosziel motors, for focus, iris and camera record start/stop, 16 frequency channels - range 2,4GHz and 433 MHz. USB port, serial interface, BNC socket for cable or antenna, 4 hotkeys. Compatible also for wired analogue zoom demands. Scope of delivery: MN-200T Transmitter (handunit) with large scale (201-041), antenna and hand strap, MN-200R Receiver (motor controller), MN-RMB1 Bracket for Receiver 2 FANT Antennas, STR2 Neck strap MN-BAT Battery type FM50, MN-CH Charger MN-AB D-Tap power cable * 2 CDM-100 Digital Chrosziel Motors, compl.* Manual, in Hard Case (MN-CASE)

MagNum KIT 2-Channel with Heden motors

MagNum KIT 2-Channel with Heden motors MagNum KIT 2-Channel Heden, for focus, iris and camera record start/stop, 16 frequency channels in the range of 2,4 GHz and 433 MHz. USB port, serial interface, BNC socket for cable or antenna, 4 hotkeys. Compatible also for wired analogue zoom demands. Scope of delivery: Transmitter (handunit MN-200T) with large scale (201-041) and hand strap, Receiver (motor controller MN-200R), 2 Antennas (FANT), battery type FM50 (MN-BAT), Charger (MN-CH), Neck strap (STR2), 2 M26VE Hedén motors, 2 Motor cables 60 cm (MOTD60), D-Tap power cable (MN-AB), Bracket f. receiver (MN-RMB1), Manual, in hard case (MN-CASE)

MagNum Mini KIT 1-Channel with Chrosziel Motor CDM-100S

MagNum Mini KIT 1-Channel with Chrosziel Motor CDM-100S MagNum Mini KIT with CDM-100S, Single Channel Lens Control for Focus, 2.4 GHz, Camera RUN start/stop, Spectrum analyzer, incl.: MN-MINI-R Receiver/Motor Controller with antenna (FANT-G), MN-100T Transmitter (hand unit) w. hand strap and neck strap (STR2), CDM-100S Digital Chrosziel Motor, compl., MN-RMB1 mounting bracket f. receiver, MN-BAT Battery type FM50, MN-CH Charger, MN-AB Power cable D-Tap, MN-CASE hard case, manual.

MagNum Mini KIT 1-Channel, with Heden Motor

MagNum Mini KIT 1-Channel, with Heden Motor MagNum Mini KIT with Hedén Motor, Single Channel, Lens Control for Focus, 2.4 GHz, camera RUN start/stop, Spectrum analyzer, incl.: MN-MINI-R Receiver/Motor Controller with antenna (FANT-G), MN-100T Transmitter (hand unit) w. hand strap and neck strap (STR2), M26VE Hedén Motor, MOTD60-S MagNum Mini Motor Cable 60cm, MN-BAT Battery type FM50, MN-CH charger, MN-AB Power cable D-Tap, MN-RMB1 mounting bracket f. receiver, MN-CASE hard case, manual.

MagNum Mini Superior KIT 1-ch. with Chrosziel Motor CDM-100S

MagNum Mini Superior KIT 1-ch. with Chrosziel Motor CDM-100S MagNum Mini Superior KIT with CDM-100S, Single Channel, Lens Control for focus, 2.4 GHz, with VariLock II a. VariFluid Hand wheel, DMX-Signal Input, Power Booster, camera RUN start/stop, Spectrum analyzer, incl.: MN-MINI-R Receiver/Motor Controller with antenna (FANT-G), MN-150T Transmitter (hand unit) w. hand strap and neck strap (STR2), CDM-100S Digital Chrosziel Motor, compl., MN-RMB1 Mounting bracket f. receiver, MN-BAT Battery type FM50, MN-CH Charger, MN-AB Power cable D-Tap, MN-CASE hard case, manual.

MagNum Mini Superior KIT 1-channel with Heden Motor

MagNum Mini Superior KIT 1-channel with Heden Motor MagNum Mini Superior KIT with Hedén Motor, Single Channel, Lens Control for focus, 2.4 GHz, with VariLock II a. VariFluid Hand wheel, DMX-Signal Input, PowerBooster, camera RUN start/stop, Spectrum analyzer, incl.: MN-MINI-R Receiver/Motor Controller with antenna (FANT-G), MN-150T Transmitter (hand unit) w. hand strap and neck strap (STR2), M26VE Hedén Motor, MOTD60-S MagNum Mini Motor Cable 60cm, MN-RMB1 Mounting bracket f. receiver, MN-BAT Battery type FM50, MN-CH Charger, MN-AB Power cable D-Tap, MN-CASE hard case, manual.

Matte Box MB 415, 2 filter stage, 114mm, 15mm rod mount, complete

Matte Box MB 415, 2 filter stage, 114mm, 15mm rod mount, complete The MB 415 Compact Wide Angle Matte Box for 15mm Support Systems from Chrosziel includes a double filter stage for filters up to 5.65 x 5.65" and 5 x 6” vertical. Both filters can be moved and fixed in any vertical position, the second filter stage is rotatable 360° or up to 240º (depending on the filter used).For optimum use of the picture angle, the first filter stage is equipped with a multi format filter holder for 4 x 4 and 4 x 5.65” filters, the second stage has a multi format filter holder for 5 x 5 and 4 x 5.65” filters. Using 4 x 5.65” filters in the front stage and 5 x 5" in the second, allows you to make full use of the wide angle format for any position of the rotating stage. For even more flexibility while using graduation filters, insert 5 x 6” filters in the first stage (filter-holder 510-02).A third stage is included inside the rubber bellows for round filters with 138mm of diameter. The MB 415 matte box mounts on 15mm lightweight supports and has a 114mm ring. A 15 inch (39cm) wide, foldable French Flag is included. Side wings (sold separately) can be used optionally. For maximum stray light reduction, use mattes.What's in the Box: Compact MatteBox 4:3 +16:9 F4.5 = CLWAH-F4.5French Flag1x fixed filter Holder multi-format 4x4/4x5.650 (410-31)1x rotatable filter holder multi-format 5x5/4x5.650 (510-01)Bracket for Ø 15mm LWS rodsRet. Ring Ø114mm

MatteBox MB 450W Super Wide

MatteBox MB 450W Super Wide MatteBox 450W Super Wide MatteBox for Wide-Angle lenses, with double-rotating Filter Stages The Chrosziel MB 450W Super Wide Matte Box is a lightweight, yet robust, carbon fiber matte box for professional cinema and video cameras. The "Super Wide" design allows for full frame lenses as wide as 20mm to be used. 1/3"-chip camcorders can use as wide as 2.6mm focal length setting without vignetting. 1/2"-chip camcorders can use down to 3.6mm. Use the included top flag to control glare and reflections for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side and bottom flags.Both filter stages accept 4x4" and 4x5.65" filters and rotate for use and control of polarizing as well as graduated filters. To use this matte box on your camera, the camera must be mounted on a separately available 15mm LWS baseplate. Fit the matte box on the rods until it covers the lens front. Rod-mounted matte boxes are preferred over clamp-on matte boxes in many production situations as they are always properly aligned with the image horizon.What's In The Box: MB450W MatteBox French flag (450-11)2 filter holders multiformat 4x4/4x5.650 (410-31), bracket for Ø15mm rodsclamp adapter Ø130mm

MatteBox MB 456 Academy Double

MatteBox MB 456 Academy Double The Chrosziel Matte Box 456-20 Academy (2 Filter Holders) consists of a 456-R20 matte box, French flag, a filter stage for two individually rotating filter holders, two 4 x 5.65"/5 x 5" filter holders, a 130mm clamp-on rear plate, and a bracket for 15mm lightweight support rods. It is ideal for use with handheld and studio production cameras.The 456-R20 Matte Box offers a wide angle (16:9/4:3) housing for lenses as wide as 12mm (35mm Academy) and eliminates the effects of vignetting. Equipped with a filter stage for two independently rotating 4 x 5.65"/5 x 5" filter holders, the matte box provides sufficient space for adjusting the position of filters.Provided with a French flag, the Matte Box 456-20 Academy controls the angle of light and eliminates lens glare and flare. It can be coupled with optional side wings for accurate light adjustment. The kit includes a 130mm clamp-on rear plate and a bracket for use with 15mm lightweight support rods (optional).With optional bridge plate adapters, you can interface the kit with 15 or 19mm bridge plate rods. An optional swing-away bracket, attached to the back of the matte box housing, allows for quick and efficient lens changes.What's in the Box: Matte Box 456 Academy Double, for full frame cameras, with Double-Rotating Filter StageFrench flag (402-26)2 filter holders multiformat 5x5/4x5.650 (510-01)16:9 (416-03) matte insertBracket for Ø15mm rods and clamp adaptor Ø130mm

Rubber Bellows RetainingRing Ø 142,5:114

Rubber Bellows RetainingRing Ø 142,5:114 Rubber Bellows RetainingRing Ø142,5:114mm for Zeiss CPII +LWZ-1, Canon Cine Primes, Sony PL primes, Alura LWZ 15.5-45/30-90

Step-down Ring Ø 130:114mm for MB456, MB450 and SD412

Step-down Ring Ø 130:114mm for MB456, MB450 and SD412 Step-down Ring Ø 130:114mm For Chrosziel 450W-20, 456-20 & 456-30 Matte Boxes and SD412 (412-02F130 only) Sunshade, and for Use with Zeiss Compact Prime, Sony PL-Mount Prime & Angenieux Optimo DP Rouge Zoom Lenses

Zoomer the Universal Zoom Servo Drive

Zoomer the Universal Zoom Servo Drive Chrosziel has expanded the successful CDM Zoom Servo Drive family. The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-UNI-Z2 fits seamlessly into the operating functions of the Sony cameras of the FX9 / FX6 / FS7 / FS5 series. The servo drive is controlled via the zoom rocker on the handle. The motor control can be addressed via Sony's camera-specific protocol and also works independently of the camera signals when a LANC zoom rocker is plugged directly into the servo.Due to the included Chrosziel Flexi toothed ring (#206-30), the Zoomer can be used with almost any zoom lens even without toothing. The multi-function handgrip, which in addition to the recording function and a zoom rocker also provide control over the camera menu and other freely selectable functions, are extremely popular on current video cameras with large sensors and are indispensable for effective operation. The Chrosziel Universal Zoom Servo Drive now allows optimal use of all manual zoom lenses together with the multi-function handgrip. For this purpose, the Zoomer is slid onto a 15mm rod and swiveled onto the zoom lens. Two plug-in cables establish the connection with the camera. One cable is used for the power supply from the camera battery, the second for the connection to the control commands between the handle and the camera. When using a standard LANC zoom rocker or handle with the Sony PXW-FS5, PXW-FS7 and PXW-FS7II, the servo is connected between the handle and the camera via an input and an output jack to receive all zoom control signals. For setup with the Sony PXW-FX9 camera, a Y-cable is used that accepts the Sony multi-connector and connects to both the input jack of the Zoomer and the input jack of the camera. For the Sony ILME-FX6 camera, a Y-cable is used and connects the 3.5mm connector of the Sony handgrip, input jack of the Universal Zoom Servo Drive, and the Sony camera. FEATURESUniversal zoom motor The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via Sony and LANC handgrip The Sony FX6 / FX9 / FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rocker with LANC protocol are compatible too, e.g. mounted handgrip. Camera control signals forwarded Control commands are immediately looped through to the camera (e.g. menu / user buttons / focus magnification / camera run & stop). Panasonic DC-BS1H & DC-BGH1 box cameras A recent firmware updated has made the CDM-UNI-Z2 compatible with the Panasonic BS1H and BGH-1 box cinema cameras when used with a Manfrotto MVR901EPLA and MVR901ECLA control handles as well as the Libec ZFC-L and ZC-LP zoom controllers. Technical dataPower supply 10-30V (Lemo compatible 0B 5-pin) 2.5mm socket (control command In) 3.5mm socket (control command In&Out)USB Type min A-B (firmware updates) Torque 0.5Nm Power consumption max. approx. 350mAh @ 12VIN THE BOX 1x CDM-UNI-Z2 Digital motor unit 1x LANC cable 1x LANC extension cable 1x MN-AB-A90 (power supply cable 12 Volt A/B D-Tap – angled 90° rotated 0B 5pin) 1x 206-30 Flexi Gear Ring (Ø 60-120mm) 1x Gear Drive, mod. 0.8 (Ø 40mm) 1x CAB-FX9 for Sony PXW-FX9 compatibility 1x CAB-FX6 for Sony PXW-FX6 compatibility USB Mini AdapterSign up for ZOOMER email updatesDon't miss future news about the ZOOMER and subscribe to the Zoomer Email list. Yes, keep me updated about the ZOOMER and send me future news about it.NOTE: we will not use your email for any other emails not related to the Zoomer. hbspt.forms.create({ region: "na1", portalId: "2769585", formId: "aae38178-6132-4e21-b6b4-bd9ac7e2828f" });