Filter
Clamp-On CINE.1 MatteBox MB 565 Double
The completely modular Cine.1 Matte Box from Chrosziel is built to be strong yet lightweight to fit into your handheld or studio camera rig. Having a matte box on the front of your lens allows you more flexilbility in lighting your scene by blocking light sources just out of frame from directly entering the lens, which can cause the lens to flare, and introduce image artifacts. This particular iteration of the Cine.1 series can be mounted directly on the lens with the integrated clamp, and is configured with two filter stages, however, it can be configured to hold either one or three filters with addition or removal of filter stages.What's in the Box: CINE.1 MatteBox MB 565 Double, for Cine Full Frame camerasClamp adapter with Ø 150mm 501-26French Flag 501-062 Filterholders multiformat 5.65x5.65/ 4x5.650, each independently 360°rotating

€1,283.00*
DV StudioRig Kit in Case, Follow Focus with all gears
DV StudioRig plus complete Kit with six gear drives in Case. Consisting of: 206-60S follow focus w. VariLock handwheel, 205-02 scale and gear drives: 206-12, 206-13, 206-14, 206-15, 206-16, 206-17 in Case

€1,283.00*
Flexi-Insertring 110:75/98mm for MB450 Mattebox
The Chrosziel Flexi-Ring Flexible Step-Down Ring is a 110 to 75-98mm adjustable step-down ring. The ring is designed to work with the MB-450 matte box series and provide light protection for a variety of wide angle and standard lenses with diameters of 75 to 98mm 

€84.00*
FlexiBellowsRing 142,5 from 70
FlexiBellows Ring 142.5, Retaining Ring Ø142,5 mm, flexible rubber bellows with approx. 35 mm extension for lens Ø between 70 to approx. 110 mm (MB415, 805, 840, 602)

€163.00*
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm
Focus drive (for 206-05S + 206-60S), mod 0.8, for gear rings and Canon and Fujinon cine style lenses, Ø 36.8mm, 44 teeth.

€101.00*
French Flag for MatteBox 450
French Flag for MB 450 +455-R1 foldable

€84.00*
Insertring Ø 100:95 mm
Insertring Ø 100:95 mm

€56.00*
Insertring Ø 110:95 mm
Insertring Ø 110:95 mm

€73.00*
Lensport Iris Motor for cine lenses and Hirose 12pin output cameras
Universal Lensport Iris Motor for cine lenses in Broadcast / ENG Run& Gun setups The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-LP-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter.The Chrosziel Lensport Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera. Compatibility: The Universal Iris Motor has been successfully tested with the following cameras (manual and automatic iris control): ARRI Amira Blackmagic URSA Broadcast G2 & URSA Mini Pro 12K Canon C300/500 with EU-V2 expansion unit Panasonic AK-PLV100 Sony F5/F55 with LA-FZB1 adapter Sony Venice Sony E-Mount cameras with Chrosziel MetaMount MA-EPL-HR12 Manual Passive Mode: For temporary manual control, the motor can be set to passive mode. Simply press the motor button once briefly and the motor can be rotated freely. Once the button is pressed again, the motor is back in Active mode and controlled by the camera. Metadata:For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready! FEATURESUniversal Iris motor The Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via any Hirose 12pin camera outputThe camera's Hirose 12pin Lensport output controls directly the Iris motor unit. Remote Iris and AutoIris controlUse the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control.

€1,624.00*
MagNum Mini KIT 1-Channel with Chrosziel Motor CDM-100S
MagNum Mini KIT with CDM-100S, Single Channel Lens Control for Focus, 2.4 GHz, Camera RUN start/stop, Spectrum analyzer, incl.: MN-MINI-R Receiver/Motor Controller with antenna (FANT-G), MN-100T Transmitter (hand unit) w. hand strap and neck strap (STR2), CDM-100S Digital Chrosziel Motor, compl., MN-RMB1 mounting bracket f. receiver, MN-BAT Battery type FM50, MN-CH Charger, MN-AB Power cable D-Tap, MN-CASE hard case, manual.

€5,348.00*
MagNum Mini Superior KIT 1-ch. with Chrosziel Motor CDM-100S
MagNum Mini Superior KIT with CDM-100S, Single Channel, Lens Control for focus, 2.4 GHz, with VariLock II a. VariFluid Hand wheel, DMX-Signal Input, Power Booster, camera RUN start/stop, Spectrum analyzer, incl.: MN-MINI-R Receiver/Motor Controller with antenna (FANT-G), MN-150T Transmitter (hand unit) w. hand strap and neck strap (STR2), CDM-100S Digital Chrosziel Motor, compl., MN-RMB1 Mounting bracket f. receiver, MN-BAT Battery type FM50, MN-CH Charger, MN-AB Power cable D-Tap, MN-CASE hard case, manual.

€6,379.00*
MatteBox MB 415 95mm, complete
The Chrosziel MB 415 Dual-Stage Wide-Angle 4 x 5.65" Matte Box mount on a 15mm LWS setup to prevent lens flares on lenses as wide as 11mm (in Super 35) for both 16:9 and 4:3 aspect ratios. The MB 415 features a dual-stage construction with a rear rotating stage. A folding top flag is included for controlling the amount of extra light blockage depending on your setup. The 15mm bracket mounts on a 15mm LWS rod setup, and a 19mm adapter can be purchased separately for studio setups. This matte box requires separately available rubber bellows or lens donut.What's in the Box:Compact Matte Box 4:3 +16:9 F4.5 = CLWAH -F4.5French Flag + CF-MB/F4.8  1x fixed filter holder multi-format 4x4/4x5.650 (410-31)1x rotatable filter holder multi-format 5x5/4x5.650 (510-01)Bracket for Ø 15mm LWS rodsRet. Ring Ø95mm (410-14F)

€1,860.00*
MatteBox MB 450W Super Wide
MatteBox 450W Super Wide MatteBox  for Wide-Angle lenses, with double-rotating Filter Stages The Chrosziel MB 450W Super Wide Matte Box is a lightweight, yet robust, carbon fiber matte box for professional cinema and video cameras. The "Super Wide" design allows for full frame lenses as wide as 20mm to be used. 1/3"-chip camcorders can use as wide as 2.6mm focal length setting without vignetting. 1/2"-chip camcorders can use down to 3.6mm. Use the included top flag to control glare and reflections for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side and bottom flags.Both filter stages accept 4x4" and 4x5.65" filters and rotate for use and control of polarizing as well as graduated filters. To use this matte box on your camera, the camera must be mounted on a separately available 15mm LWS baseplate. Fit the matte box on the rods until it covers the lens front. Rod-mounted matte boxes are preferred over clamp-on matte boxes in many production situations as they are always properly aligned with the image horizon.What's In The Box: MB450W MatteBox  French flag (450-11)2 filter holders multiformat 4x4/4x5.650 (410-31), bracket for Ø15mm rodsclamp adapter Ø130mm

€1,283.00*
MatteBox MB 456 Academy Double
The Chrosziel Matte Box 456-20 Academy (2 Filter Holders) consists of a 456-R20 matte box, French flag, a filter stage for two individually rotating filter holders, two 4 x 5.65"/5 x 5" filter holders, a 130mm clamp-on rear plate, and a bracket for 15mm lightweight support rods. It is ideal for use with handheld and studio production cameras.The 456-R20 Matte Box offers a wide angle (16:9/4:3) housing for lenses as wide as 12mm (35mm Academy) and eliminates the effects of vignetting. Equipped with a filter stage for two independently rotating 4 x 5.65"/5 x 5" filter holders, the matte box provides sufficient space for adjusting the position of filters.Provided with a French flag, the Matte Box 456-20 Academy controls the angle of light and eliminates lens glare and flare. It can be coupled with optional side wings for accurate light adjustment. The kit includes a 130mm clamp-on rear plate and a bracket for use with 15mm lightweight support rods (optional).With optional bridge plate adapters, you can interface the kit with 15 or 19mm bridge plate rods. An optional swing-away bracket, attached to the back of the matte box housing, allows for quick and efficient lens changes.What's in the Box: Matte Box 456 Academy Double, for full frame cameras, with Double-Rotating Filter StageFrench flag (402-26)2 filter holders multiformat 5x5/4x5.650 (510-01)16:9 (416-03) matte insertBracket for Ø15mm rods and clamp adaptor Ø130mm

€1,669.00*
Rubber Bellows Ø 142.5:95mm WA
Rubber Bellows Retaining Ring Ø 142.5:95 mm for Fujinon/Canon WA zoom lens F4.5

€230.00*
Set of Side Wings
Set of Side Wings for Mattebox Academy 456, S16/4:3, SD 411

€443.00*
Set of SideWings for MB 415, MB 805, SD 412, MB 565
Set of SideWings for MB 415, MB 805, SD 412, MB 565

€398.00*
Side wings for MatteBox 450
Set Side wings for MatteBox 450

€342.00*
Stack-on Filterholder, 360° rot.
Stack-on Filterholder Compartment, rotating 360° for Ø 138mm Filters and 4x4 Filterholder (to be added at Mattebox back plate dia. 142.5mm please order extra Filterholder wide 110mm)

€185.00*
Step-down Ring Ø 104:95 mm
Step-down Ring Ø 104:95 mm

€73.00*
Step-down Ring Ø110:95mm F4.3mm
Step-down Ring Ø110:95mm for ENG wide angle lenses e.g. Canon F4.3mm (f. SD 412-02F110)

€84.00*
Swing-Away MatteBox Kit MB 565 Triple for 15 mm rods
Swing-Away MatteBox Kit MB 565 Triple 15, for Cine FullFrame cameras, includes: *Clamp adapter with Ø 150mm 565-00-SW15: Swing-Away arm for Ø 15mm rods 501-26: French Flag 510-07: 3 Filterholder comb. 4x5.650hor./4x4, each independently rotating 360° 565-00-12: Pivot mechanism (left/right ) 410-200: 1 set of side wings 510-11: 1 set of rosettes for handles 565-00-11: Accessory bar w. adjust. slider 510-19: Filter tray catcher 510-54: FlexiBellows 565-CASE: Case with insert

€3,960.00*
Top French Flag for 456-20 + 411-50 a. o.
Top French flag for MB 4:3 and 16:9, foldable (456-20, 411-50)

€84.00*
Top French Flag wide, foldable
Top French Flag extra wide angle, foldable

€96.00*