Lightweight, robust, and ready for production, the Chrosziel MB 450-R21 Matte Box with double-rotating filter stages can complement a wide range of cameras, from smaller camcorders or mirrorless cameras, up to larger cinema cameras and camcorders with cine and ENG lens having a diameter of up to 114mm (lenses with a diameter smaller than 110mm may require additional accessories for full compatibility, see list lower down the page). With the included top flag and 16:9 mask, glare from outside the frame can be effectively controlled for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side wings and bottom flags.What's in the Box:MB450 Mattebox Mask 16:9French flag (450-11)Pivot mechanism for side wings2 rotating filterholders - 4x4 (402-12) and multiformat 4x4/4x5.650 (410-04)Rod clamp for Ø15mm rodsEnd plate Ø114/110mm
MatteBox 450R3 with Triple-Rotating-FilterStage, The Chrosziel 450-R31 Triple Stage Matte Box easily fits onto industry standard 15mm support rods and perfectly meets the requirements of shooting with compact camcorders and DSLR cameras, allowing you the ability to have greater control of light angles and lens flare. This matte box offers a triple rotating filter stage, a 16:9 mask, three filter holders that can be adjusted accepting 4 x 5.65" and 4 x 4" glass filters, a French flag, and pivot mechanism for side wings (sold separately). The Chrosziel 450-R31 Triple Stage Matte Box also includes a bracket for 15mm support rods, and a cover end plate with thread 114 + 110mm.What's in the Box: MB450-R31 Mattbox Mask 16:9French flag (450-11)Pivot mechanism (for optionally use of side wings)Rotatable filterholders 4x4 (1x 402-12) and multi-format 4x4/4x5.650 (2x 410-04)Bracket for Ø15mm rodsCover end plate with thread Ø114/110mm
MatteBox 450R3-DSWC, Direct Swing Away System with Triple-Rotating-FilterStage, The Chrosziel 450-R31 Triple Stage - DSW Matte Box easily fits onto industry standard 15mm support rods and perfectly meets the requirements of shooting with compact cinema cameras, camcorders and DSLR cameras, allowing you the ability to have greater control of light angles and lens flare. This matte box offers a triple rotating filter stage, a 16:9 mask, three filter holders that can be adjusted accepting 4 x 5.65" and 4 x 4" glass filters, a French flag, and pivot mechanism for side wings (sold separately). The Chrosziel 450-R31 Triple Stage - DSW Matte Box also includes a bracket for 15mm support rods, and a cover end plate with thread 114 + 110mm.
For cameras with interchangeable lenses, the DSW Direct-Swing-System offers unparalleled comfort for quick and easy lens change.What's in the Box:450-R3DC Mattebox Mask 16:9 French flag (450-11) Pivot mechanism (for sidewings)Rotatable filterholders 4x4 (1x 402-12) and multi-format 4x4/4x5.650 (2x 410-04) Clamp-bracket for Ø15mm rodsEnd plate with thread Ø114/110mm
MatteBox 450R2-DSWC, Direct-Swing-Away System with Double-Rotating-Filter Stage, Lightweight, robust, and ready for production, Chrosziel's MB 450R2 Swing-Away Matte Box can complement a wide range of cameras, from smaller camcorders or mirrorless cameras, up to larger cinema cameras and ENG camcorders with an outer lens diameter of up to 114mm (lenses with a diameter smaller than 110mm may require additional accessories for full compatibility). With the included top flag and 16:9 mask, glare from outside the frame can be effectively controlled for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side and bottom flags.The rear stage accepts 4x4" filters only, while the front stage will accept 4x4 as well as larger 4x5.65" filters. Both stages rotate, enabling the use and control of polarizing as well as graduated filters. For further possibilities, the MB 450R2 can be upgraded in the future with a separately available third rotating filter stage.What's in the Box: 450-R21 Mattebox Mask 16:9 french flag (450-11) Pivot mechanism for side wings (option)Rotatable filterholders 4x4 (402-12) and multi-format4x4/4x5.650 (410-04)Clamp-bracket for Ø15mm rodsCover end plate with thread Ø114/110mm