CDM-MK-Z2 - compact control-unit for Fujinon Zoom MK 18-55, 50-135mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. Incl. 1x digital servo-motor-unit, 1x LANC cable, 1x LANC extension cable, 1 x MN-AB (powercable 12 Volt A/B D-Tap 0B 5pin), 1x Allen Key, 1x Mini-USB-adapter.DESIGNED FOR FUJINON MK 18-55MM T2.9 & FUJINON MK 50-135MM T2.9
CONTROLLED VIA SONY FS & LANC HANDGRIP
Control directly the zoom servo drive via optically de-coupled LANC sockets and Sony FS5 / FS7 handgrip zoom rocker. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip.
CAMERA CONTROL SIGNALS FORWARDED
Control signals (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera.
SINGLE UNIT MOUNTED ONTO LENS
Two captive screws keeping the single servo drive unit permanently fixed onto lens.
4 ZOOM MODES
1st EB / Documentary, 2nd Live / Hardcut, 3rd Silent, 4th Direct Mode
CDM-MK-Z2 - servo drive unit for Fujinon Zoom XK 20-120mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. ZOOM SERVO DRIVE FOR FUJINON XK ZOOM LENS: CDM-XK-Z
MOTORIZE YOUR FUJINON XK6X20 20-120MM T3.5 WITH CHROSZIEL
SINGLE UNIT MOUNTED ONTO LENSTwo captive screws keeping the single servo drive unit permanently fixed onto lens.CONTROLLED VIA SONY FS & LANC HANDGRIPThe Sony FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip.CAMERA CONTROL SIGNALS FORWARDEDControl signals (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera.4 ZOOM MODESEB / Documentary, Live / Hardcut, Silent, Direct Mode_________________________________________________________________All in one single housing
Developed for the Fujinon XK6x20 20-120 mm zoom lens the CDM-XK-Z enables ways of creativity that may be impossible just by zooming manually. To simplify the operator’s workflow the zoom servo drive is directly mounted onto the lens by two captive screws.
The weight of the CDM-XK-Z including digital motor, gear, PCB with CPU, screws and cabling is 0.44 lbs. (197 gram). With the zoom servo drive Chrosziel addresses camera operators who are working in the broadcast and documentary sector looking for a reasonably priced zoom servo drive.
_____________________________________________________All camera control signals forwarded
Control commands (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera via the LANC protocol.
By using a Sony PXW-FS5 or a Sony PXW-FS7 camera with a SWIT battery a D-Tap to a (straight or angled) Lemo compatible 5-Pin power cable is used (Chrosziel order numbers: MN-AB-A with angled Lemo compatible socket / MN-AB with straight Lemo compatible socket). The two Jack-Jack cables are forwarding the control commands from the hand grip.
If e.g. a Panasonic Varicam, Sony PMW-F5 or Sony PMW-F55 are used a combined cable with power and start / stop is required, like a Hirose 4-Pin to a (straight or angled) Lemo compatible 5-Pin cable (Chrosziel order numbers: F55-A2-PCAM-A with angled Lemo socket / F55-A2-PCAM with straight Lemo compatible socket). Also, the two Jack-Jack cables are forwarding the control commands from the hand grip.
Also, Chrosziel offers a variety of power cables with straight and angled plugs for all types of camera power out sockets and batteries including camera run / stop functionality.
_____________________________________________________Chrosziel CDM-XK-Z Zoom Servo Motor: zoom modes
For freedom of creativity the operator may choose from four different zoom modes: EB / Documentary Mode, Live / Hardcut Mode, Silent, and Direct Mode.
EB / Documentary ModeDesigned for long and smooth zoom drives with the CDM-LWZ3-Z it offers slow creeping zoom transitions while keeping the motive perfectly framed.Silent ModeTo reduce the sound of the zoom servo drive the maximum speed of its motor is limited to 40 percent making the setup almost inaudible.Live / Hardcut ModeTo catch the best moments, the Live / Hardcut Mode is useful. It uses 80 percent of the maximum speed capacity of the motor offering fast zoom drives but with Soft Ramping.Direct ModeThe Direct Mode finally uses the full speed capacity of the Zoom Servo Drive. The LANC commands are implemented instantaneously without ramping and smooth transitions. Useful for B camera operators catching snaps shots from the concert.______________________________________________________________How to change zoom modes
You can choose the different modes by pressing the zoom rocker for round about 25 seconds, then the green LED flashes very fast while changing the zoom mode and after that it blinks 1, 2, 3 or 4 times* – depends on the zoom mode you chose (* 1 = EB / Documentary / 2 = Silent / 3 = Live / Hard Cut / 4 = Direct). To cycle through these all you need to do is hold the zoom rocker down one way for a couple of seconds to switch to the next mode, and the other way, hold to reverse.
DV StudioRig plus complete Kit with six gear drives in Case. Consisting of: 206-60S follow focus w. VariLock handwheel, 205-02 scale and gear drives: 206-12, 206-13, 206-14, 206-15, 206-16, 206-17 in Case
DV StudioRig plus, follow focus with non-slip padded hand wheel, VariLockwith 2 adjustable hard stops, free wheel, scale (205-02), for one-side operation. Extended range for lens diameter up to 130 mm (measured with gear drive 206-12, not included). A single lock for rod and extension clamp makes changing of lenses quick. Hand wheel with fine-structured rubber surface for a comfortable, save grip. A focus lever and flexible shafts extend the functionality. The scale is easy to change and the reference marking is adjustable for the operator or the assistant. Gear drives and gear rings for the different lenses ensure precise adjustments and can be mounted without tool on both sides of the gear unit. The VariLock 2 feature of the Rigs now allows both since the range of rotation is fully variable for anyselectable limit. The red stopper marks infinity or any other distance and the blue one the second focal plane or the nearest lens setting. By unlocking the two variable end stops the hand wheel turns unlimited. In addition, the camera operator himself can precisely control and reproduce the focus settings even without an assistant. Both stoppers are covered with soft rubber for silent operation.
Fluid Zoom Drive mod. 0.8 for cine and cinestyle lenses (up to medium-sized barrels) ALSO for Foto lenses together with 206-30 Flexiring, incl. 2 Zoomsticks
Universal Lensport Iris Motor for cine lenses in Broadcast / ENG Run& Gun setups
The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-LP-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter.The Chrosziel Lensport Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera.
Compatibility: The Universal Iris Motor has been successfully tested with the following cameras (manual and automatic iris control):
ARRI Amira
Blackmagic URSA Broadcast G2 & URSA Mini Pro 12K
Canon C300/500 with EU-V2 expansion unit
Panasonic AK-PLV100
Sony F5/F55 with LA-FZB1 adapter
Sony Venice
Sony E-Mount cameras with Chrosziel MetaMount MA-EPL-HR12
Manual Passive Mode: For temporary manual control, the motor can be set to passive mode. Simply press the motor button once briefly and the motor can be rotated freely. Once the button is pressed again, the motor is back in Active mode and controlled by the camera. Metadata:For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready!
FEATURESUniversal Iris motor
The Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod.
Controlled via any Hirose 12pin camera outputThe camera's Hirose 12pin Lensport output controls directly the Iris motor unit. Remote Iris and AutoIris controlUse the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control.
MagNum KIT 3-Channel for focus, iris, zoom, with CDM-100, camera RUN start/stop, 16 frequency channels in the range of 2,4 GHz and 433 MHz, USB port, serial interface, BNC socket for cable or antenna, 4 hotkeys. Compatible also with wired analogue zoom / focus demands. Incl.: MN-200T Transmitter (hand unit ) w. large scale (201-041), hand and neck strap (STR2), MN-200R Receiver/Motor Controller, FANT 2 antennas, CDM-100 3 Digital Chrosziel Motors, compl., MN-RMB1 Mounting bracket f. receiver, MN-EXT-MOT-LP Ext. Interface f. 3rd motor, MN-ZR Zoom-Rocker, MN-BAT Battery type FM50, MN-CH Charger, MN-AB Power cable D-Tap, MN-CASE hard case, manual.
MagNum KIT 3-Channel for focus, iris, zoom, with Hedén motors, camera RUN start/stop, 16 frequency channels in the range of 2,4 GHz and 433 MHz, USB port, serial interface, BNC socket for cable or antenna, 4 hotkeys. Compatible also with wired analogue zoom / focus demands. Incl.: MN-200T Transmitter (hand unit ) w. large scale (201-041)Hand and neck strap (STR2), MN-200R Receiver/Motor ControllerFANT 2 antennas, M26VE 3 Hedén motorsMOTD60 3 Motor cables 60cmMN-RMB1 Mounting bracket f. receiverMN-EXT-MOT-LP Ext. Interface f. 3rd motorMN-ZR Zoom-RockerMN-BAT Battery type FM50, MN-CH ChargerMN-AB Power cable D-TapMN-CASE hard case, manual
The completely modular Cine.1 Matte Box from Chrosziel is built to be strong yet lightweight to fit into your handheld or studio camera rig. Having a matte box on the front of your lens allows you more flexibility in lighting your scene by blocking light sources just out of frame from directly entering the lens, which can cause the lens to flare, and introduce image artifacts. This particular iteration of the Cine.1 series can be mounted on 15 or 19mm rods, and is configured with two filter stages, however, it can be configured to hold either one or three filters with addition or removal of filter stages.What's in the Box: MatteBox MB 565 Double, for Cine FullFrame camerasFrench Flag (501-26)2 filterholders multiformat 4x5.650 / 4x4 (510-07) each independently 360° rotatableClamp adapter Ø 150mmRod clamps for Ø 15 + 19mm
The completely modular Cine.1 Matte Box MB565 from Chrosziel is built to be strong yet lightweight to fit into your handheld or studio camera rig. Having a matte box on the front of your lens allows you more flexibility in lighting your scene by blocking light sources just out of frame from directly entering the lens, which can cause the lens to flare, and introduce image artifacts. This particular iteration of the Cine.1 series can be mounted on 15 or 19mm rods, and is configured with three filter stages, which can be easily removed when not required by your production.What's in the Box: MatteBox MB 565 Triple, for Cine FullFrame cameras, includesClamp adapter with Ø 150mm 501-26French Flag 501-073 Filterholders multiformat 4x5.65/ 4x4, each independently 360°rotatable 565-00-RC15 Rod clamps for Ø 15mm 565-00-RC19: Rod clamps for Ø 19mm
Universal 15 + 19mm Lens Support Bracket with 3 support stands, intercombinable, lenght 14, 27 and 35 mm, for lenses w. 1/4" + 3/8" threads. With QuickFit device for Ø15 + 19mm rods.
The Chrosziel CDM-PREM-FIZ Full Servo Drive Unit was developed exclusively with all three Fujinon Premista Lenses and is field installable. This compact and ergonomic design allows you to integrate the all-manual “cine style“ Fujinon Premista lens into your broadcast, multi-camera and remote head workflows in a very simple way, because you have all components in one housing.Three perfectly positioned drive gears engage the Fujinon Premista lens with a high degree of precision, employing three powerful digital cine motors. The Chrosziel CDM-PREM-FIZ is particularly useful for cinematic multicam, ENG and OB work, where zoom and focus can be controlled from standard Fujinon TVstyle tripod controls or the handheld zoom rocker switch. It supports remote head and robotics applications via the Hirose 20pin Fujinon remote interface, which also allows the Chrosziel Magnum wireless FIZ unit and all other compatible brands of FIZ to control the drive’s focus, zoom and iris.
This Project is supported by the Federal
Ministry for Economic Affairs and Climate Action (BMWK) on the basis of a decision by the
German Bundestag.
TECHNICAL SPECIFICATIONS• Demand Input Focus (analog/digital 16-bit)• Demand Input Zoom (analog/digital 16-bit)• Standard Fujinon Digipower Control Protocols• External Power recommended for maximum performance• /i and eXtended data pass thru• Weight: approx. 1.2 KG (2.6 lbs)CONNECTOR OVERVIEW• Power: Lemo-compatible 0B.305• Lens-Port: 12 Pin-Hirose socket• Focus-Demand 12 Pin Hirose Socket (Fujinon standard – Pinout)• Zoom-Demand 12 Pin Hirose Socket (Fujinon standard – Pinout)• Remote (Hirose 20 Pin)KEY FEATURES• Compatible with Premista 19-45, 28-100, 80-250• /i eXtended data pass thru for augmented/ virtual production workflows• User installable drive unit• Lightweight (approx. 1.2 kg/2.6 lbs.)• Fujinon Digipower Protocols enable seamless use in robotic and remote head applications• USB Port for software updates• Wide range of power input (12V-30V DC)• Built-in adjustable speed zoom rockerWhat is in the box?• 1x CDM-PREM-FIZ – Full servo drive• 1x MN-AB-A - Power Cable 12 Volt A/B D-Tap• 1x AL2-INTF-LP – Connection Cable Lensport• 1x Allen Key
Swing-Away MatteBox MB 565 Double 19, for Cine FullFrame cameras, includes: *Clamp adapter with Ø 150mm 565-00-SW19: Swing-Away arm for Ø 19mm rods (adjustable +/- 5mm hor./vert., tilting) 501-26: French Flag 510-07: 2 Filterholder comb. 4x5.650hor./4x4, each independently 360°rotating 565-00-12: Pivot mechanism (left/right ) 410-200: 1 set of side wings 501-11: 1 set of rosettes for handles 565-00-11: Accessory bar w. adjustable slider 510-19: Filter tray catcher 510-54: FlexiBellows 565-CASE: Case with insert
Swing-Away MatteBox MB 565 Triple 19, for Cine FullFrame cameras, includes: *Clamp adapter with Ø 150mm 565-00-SW19: Swing-Away arm for Ø 19mm rods (adjustable +/- 5mm hor./vert., tilting) 501-26: French Flag 510-07: 3 Filterholder comb. 4x5.650hor./4x4, each independently 360°rotating 565-00-12: Pivot mechanism (left/right ) 410-200: 1 set of side wings 510-11: 1 set of rosettes for handles 565-00-11: Accessory bar w. adjustable slider 510-19: Filter tray catcher 510-54: FlexiBellows 565-CASE: Case with insert
Chrosziel has expanded the successful CDM Zoom Servo Drive family.
The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-UNI-Z2 fits seamlessly into the operating functions of the Sony cameras of the FX9 / FX6 / FS7 / FS5 series. The servo drive is controlled via the zoom rocker on the handle. The motor control can be addressed via Sony's camera-specific protocol and also works independently of the camera signals when a digital LANC zoom rocker is plugged directly into the servo.Due to the included Chrosziel Flexi toothed ring (#206-30), the Zoomer can be used with almost any zoom lens even without standard cine gearing.
The multi-function handgrip, which in addition to the recording function and a zoom rocker also provide control over the camera menu and other freely selectable functions, are extremely popular on current video cameras with large sensors and are indispensable for effective operation.
The Chrosziel Universal Zoom Servo Drive now allows optimal use of all manual zoom lenses together with the multi-function handgrip. For this purpose, the Zoomer is slid onto a 15mm rod and swiveled onto the zoom lens. Two plug-in cables establish the connection with the camera. One cable is used for the power supply from the camera battery, the second for the connection to the control commands between the handle and the camera. When using a standard LANC zoom rocker or handle with the Sony PXW-FS5, PXW-FS7 and PXW-FS7II, the servo is connected between the handle and the camera via an input and an output jack to receive all zoom control signals. For setup with the Sony PXW-FX9 camera, a Y-cable is used that accepts the Sony multi-connector and connects to both the input jack of the Zoomer and the input jack of the camera.
For the Sony ILME-FX6 camera, a Y-cable is used and connects the 3.5mm connector of the Sony handgrip, input jack of the Universal Zoom Servo Drive, and the Sony camera.
FEATURESUniversal zoom motor
The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod.
Controlled via Sony and Digtial LANC handgrip
The Sony FX6 / FX9 / FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rockers with digital LANC protocol are compatible too, e.g. mounted handgrip.
Camera control signals forwarded
Control commands are immediately looped through to the camera (e.g. menu / user buttons / focus magnification / camera run & stop).
Panasonic DC-BS1H & DC-BGH1 box cameras A recent firmware updated has made the CDM-UNI-Z2 compatible with the Panasonic BS1H and BGH-1 box cinema cameras when used with a Manfrotto MVR901EPLA and MVR901ECLA control handles as well as the digital LANC Libec ZFC-L and ZC-LP zoom controllers. Technical dataPower supply 10-30V (Lemo compatible 0B 5-pin)
2.5mm socket (control command In)
3.5mm socket (control command In&Out)USB Type min A-B (firmware updates)
Torque 0.5Nm
Power consumption max. approx. 350mAh @ 12VIN THE BOX
1x CDM-UNI-Z2 Digital motor unit
1x LANC cable
1x LANC extension cable
1x MN-AB-A90 (power supply cable 12 Volt A/B D-Tap – angled 90° rotated 0B 5pin) 1x 206-30 Flexi Gear Ring (Ø 60-120mm)
1x Gear Drive, mod. 0.8 (Ø 40mm)
1x CAB-FX9 for Sony PXW-FX9 compatibility
1x CAB-FX6 for Sony PXW-FX6 compatibility
USB Mini AdapterSign up for ZOOMER email updatesDon't miss future news about the ZOOMER and subscribe to the Zoomer Email list. Yes, keep me updated about the ZOOMER and send me future news about it.NOTE: we will not use your email for any other emails not related to the Zoomer.
hbspt.forms.create({
region: "na1",
portalId: "2769585",
formId: "aae38178-6132-4e21-b6b4-bd9ac7e2828f"
});