Light weight support for Sony ILME-FX6, with integrated shoulder pad, 2 rosettes, VLock-Plate, Tripod Adapter Plate, 2 rods Ø 15mm, l. 205mm.Lightweight support (LWS) for Sony FX6 cameras Four positions are provided on the light support for the 3-point camera attachment, which allows the camera to be attached to the light support without distortion. This guarantees parallel alignment of the optical axis to the light support and the attached compendium. A specially hardened V-lock plate allows the light support to be used on the tripod with the standard Sony VCT-14/VCT-U14 adapter plate, the Chrosziel V-Mount Quicklock plate (401-150) or compatible adapter plates from other manufacturers in a stable two-point lock. The V-Lock plate under the light support can be easily exchanged by the user for the tripod adapter plate (401-FS7/5-03). This allows other adapter plates, such as the Sachtler plate, to be firmly screwed to the light support. The attachment points of common adapter plates are taken into account. Both the Chrosziel V-Lock plate and the tripod adapter plate have captive screws.The shoulder pad under the light support can be moved over a wide range. A lever clamp mechanism with external lever access allows the user to slide it on the shoulder. This allows him to quickly correct the balance of the camera during operation. The pad is tapered to fit the shoulder and has an elevation toward the neck for side protection. After fully opening the lever clamp, the pad can be removed and inserted rotated 180 degrees, so that one can equally use the light support on the left or right shoulder. The pad itself is manufactured using a new process from the automotive industry in a special mold with a molded core surrounded by an elastic material with a strong durable outer shell. This multi-layer construction results in high comfort and fatigue-free work.At the front of the light support, 15mm tubes are attached with one clamping lever each. On both sides of the light support there are Hirth rosettes (Arri compatible) for attaching handles or other accessories.The optional rear tube clamp can be screwed to the rear end of the light support. With additional 15mm tubes, battery adapter plates, video transmitters, video recorders or other accessories can be attached behind the camera in a variable and movable way. Alternatively, there are four screw points (1/4 and 3/8" with Arri anti-twist protection) at the top of the rear part of the light support for accessories.The Chrosziel light support of the FX6 is the optimal result of stability and weight due to a sophisticated design. It is manufactured in Germany.INCLUDED IN BOXIntegrated shoulder pad2 rosettesVLockPlateTripod Adapter PlateOne pair of rods: Diameter: 15mm, Length: 205mm

KIT - Lightweight support (LWS) for Sony FX 6 cameras.Lightweight supportFour positions are provided on the light support for the 3-point camera attachment, which allows the camera to be attached to the light support without distortion. This guarantees parallel alignment of the optical axis to the light support and the attached compendium. A specially hardened V-lock plate allows the light support to be used on the tripod with the standard Sony VCT-14/VCT-U14 adapter plate, the Chrosziel Quicklock plate or compatible adapter plates from other manufacturers in a stable two-point lock. The V-Lock plate under the light support can be easily exchanged by the user for the tripod adapter plate (401-FS7/5-03). This allows other adapter plates, such as the Sachtler plate, to be firmly screwed to the light support. The attachment points of common adapter plates are taken into account. Both the Chrosziel V-Lock plate and the tripod adapter plate have captive screws. The shoulder pad under the light support can be moved over a wide range. A lever clamp mechanism with external lever access allows the user to slide it on the shoulder. This allows him to quickly correct the balance of the camera during operation. The pad is tapered to fit the shoulder and has an elevation toward the neck for side protection. After fully opening the lever clamp, the pad can be removed and inserted rotated 180 degrees, so that one can equally use the light support on the left or right shoulder. The pad itself is manufactured using a new process from the automotive industry in a special mold with a molded core surrounded by an elastic material with a strong durable outer shell. This multi-layer construction results in high comfort and fatigue-free work. At the front of the light support, 15mm tubes are attached with one clamping lever each. On both sides of the light support there are Hirth rosettes (Arri compatible) for attaching handles or other accessories. The optional rear tube clamp can be screwed to the rear end of the light support. With additional 15mm tubes, battery adapter plates, video transmitters, video recorders or other accessories can be attached behind the camera in a variable and movable way. Alternatively, there are four screw points (1/4 and 3/8" with Arri anti-twist protection) at the top of the rear part of the light support for accessories. The Chrosziel light support of the FX6 is the optimal result of stability and weight due to a sophisticated design. It is manufactured in Germany. Top Plate FX6 The Chrosziel Top Plate FX6 is slid over the carrying handle from behind and attached to the camera with four screws. The plate offers multiple mounting options on the sides and top with ¼" and 3/8" holes for wide accessories. Sony's tape measure pin can be screwed into the Top Plate on the left or right side. There are also six mounting points on the plate for Sony's 4 cable clamps. The FX6 carrying handle can also be removed with the Top Plate screwed on, for example for gimbal use. Handle extension FX6 The FX6 camera's control handle connects directly to the camera body via the same Sony proprietary bayonet mount as the FS5, and can be adjusted in angle via a switch on the handle. The Chrosziel FX6 Handgrip Extension is extendable from 175 to 250mm and has the Sony bayonet mount at the lower end. The FX6 operating handle can be inserted directly into the Chrosziel handle extension. To connect the handle extension to the camera, an adapter piece with Hirth rosette is inserted into the camera-side bayonet connection. The Chrosziel handle extension also has a rosette at the upper end and can be screwed into the camera with the adapter piece. When using the FX6 light support, the handgrip extension can be attached directly to the rosette of the light support. This provides great flexibility in mounting options. The handgrip extension includes a 300mm extension cable with 3.5mm jack (4-pin) connection for signal routing between handgrip and camera. The adapter piece with Hirth rosette is also supplied as a single part and allows other accessories to be attached to the FX6 camera. In the BoxLightweight support (LWS) with V-Lock plate and tripod adapter plate 401-FS7/5-03 2 tubes Ø 15 mm, L. 205mm rear tube clamping Top Plate, Handle extension Hirth rosette with screws extension cable, L. 300 mm All parts of the LWS FX6 kit are also available separately.

Top-Plate for Sony PXW-FX6, with integrated mounting points 1/4" and 3/8".TOP PLATE FX6 The Chrosziel Top Plate FX6 is slid over the carrying handle from behind and attached to the camera with four screws. The plate offers multiple mounting options on the sides and top with ¼" and 3/8" holes for wide accessories. Sony's tape measure pin can be screwed into the Top Plate on the left or right side. There are also six mounting points on the plate for Sony's 4 cable clamps. The FX6 carrying handle can also be removed with the Top Plate screwed on, for example for gimbal use.

Hirth-Rosette for Sony ILME-FX6, mounted inside the bayonet lock of FX6 handgrip . For use with Chrosziel 403-FX6 handgrip extension or Hirth-Rosette accessories.

CDM-100 Chrosziel's Digital Motor, 24V operating voltage, with cable 800mm length and Lemo 7-Pin 1B standard connector.With the Digital Motor CDM-100, we developed an extremely light weight, silent, small and horizontally aligned lens motor. It perfectly suites Gimbal, Drone and SteadiCam applications.FEATURESPerfect for Gimbals, Drones and SteadiCam Horizontally aligned Extremely light weight Extremely silent Very small and short housing Motor housing with standard 19mm diameter Smart gear attachement for secure operation and fast exchange Two gear diameters (40 and 60mm), even for large lens pitches Fixed motor cable additionally reducing motor size and weight New, Universal Rod Clamp with integrated captive slider – quickly and easily adjustable for use with Ø 15mm or Ø 19mm rodsTechnical detailsDimensions: L 63 mm, max. Diameter 25 mm (without gear) Weight (without clamp): 97g without gear, ca. 110g with small gear Voltage: max. 24V Cable length: 70cm Connector Lemo 1B 7-Pin Two gears: Ø 40mm & Ø 60mm with mod 0.8 Gear Diameter Ø 40mm with mod 0.5 (CDM-D40-M05) or 0.6 (CDM-D40-M06) additionally available 15mm / 19mm Universal Rod Clamp Compatibility Chrosziel Digital Motor CDM-100 compatible with: Chrosziel MagNum, Chrosziel Aladin MK II and 3rd party brands Chrosziel Digital Motor CDM-100S compatible with: Chrosziel MagNum mini, Freefly Movi and othersIn the BoxEU15-19 Universal Rod Clamp for Ø 15/19mm CDM-D40 Gear Drivemod. 0.8, Ø 40mmCDM-D60 Gear Drivemod. 0.8, Ø 60mm

CDM-100S - Chrosziel's Digital Motor with small Lemo 7-Pin 0B connector, nominal operating voltage 24V, cable 700mm,incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm, Aswell for use with Freefly Movi and others.FEATURES Digital Motor CDM-100 Perfect for Gimbals, Drones and SteadiCams Horizontally aligned Extremely light weight Very small and short housing Motor Housing with Standard 19mm Diameter Smart gear attachement for secure operation and fast exchange Two gear diameters, even for large lens pitches Fixed motor cable additionally reducing motor size and weight Universal rod clamp with captive slider for Ø 15mm / 19mm rods Technical details: Dimensions: L 63 mm, max. Diameter 25 mm (without gear) Weight (without clamp): 97g without gear, ca. 110g with small gear Voltage: max. 24V Cable length: 70cm Connector Lemo 1B 7-Pin Two gears: Ø 40mm & Ø 60mm with mod 0.8 Gear Diameter Ø 40mm with mod 0.5 (CDM-D40-M05) or 0.6 (CDM-D40-M06) additionally available 15mm / 19mm Universal Rod ClampCompatibility Chrosziel Digital Motor CDM-100 compatible with:  Chrosziel MagNum, Chrosziel Aladin MK II and 3rd party brandsChrosziel Digital Motor CDM-100S compatible with: Chrosziel MagNum mini, Freefly Movi and othersIn the BoxCDM-100S with small Lemo 7-Pin 0B connectorCable 700mmEU15-19 Universal Rod Clamp for Ø 15/19mmCDM-D40 Gear Drive, mod. 0.8, Ø 40mmCDM-D60 Gear Drive, mod. 0.8, Ø 60mm

Kit Digital Motor FIZ for Freefly MoVI Pro & MoVi XL with 3x CDM-100M, each CDM-100M with connector for Freefly MoVI Pro & MoVi XL Gimbal Camera Stabilizer, 24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plug, incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm.CDM-100M LENS MOTOR FREEFLY MOVI PRO & MoVi XL GIMBAL Perfect for (focus, iris, zoom) lens control Digital Motor CDM-100M with connector for Freefly MoVI Pro & MoVi XL Gimbal Camera Stabilizer, 24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plug, incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm. FEATURESLIGHTWEIGHT 97 grams = less than a chocolate barCOMPACT63 mm length & 19 mm diameter = small as a pinkyENERGY EFFICIENT250 mAh at 22 V = power consumption lowered by 80 %MOLEX MICROFIT 3.0Molex MicroFit 3.0 6-Pin connector = perfect for Freefly MoVi Pro gimbalLIGHTWEIGHT, ENERGY EFFICIENT, AND VERSATILE: CHROSZIEL CDM-100M This is the reason why Chrosziel is absolutely committed to designing the CDM-100M consistently for compact dimensions and weight reduction. With a length of 63 mm, a diameter of 19 mm and 97 grams, the Gimbal motor is extremely compact and lightweight. The integrated cable including the Molex MicroFit 3.0 6-pin connector saves additional weight. It can be conveniently connected to the camera stage to control focus, iris and / or zoom via the Freefly MoVi Controller, Freefly Mimic or Freefly Pilot. With a power consumption of only 250 mAh at 24 V the CDM-100M requires at least 80 percent less energy than other commercially available motors. Chrosziel supports operators of gimbal systems that require a special motor for optics in a light setup. This makes it possible to carry gimbal systems for a long time without fatigue and while saving a lot of battery power. In the Box:3x CDM-100M Digital Motor FIZ for Freefly MoVI Pro, each CDM-100M with connector for Freefly MoVI Pro Gimbal Camera Stabilizer24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plugEU15-19 Universal Rod Clamp for Ø 15/19mmCDM-D40 Gear Drive, mod. 0.8, Ø 40mmCDM-D60 Gear Drive, mod. 0.8, Ø 60mm

CDM-100M Lens Motor Freefly MoVi Pro & MoVi XL GimbalPerfect for (focus, iris, zoom) lens controlDigital Motor CDM-100M with connector for Freefly MoVI Pro  & MoVi XL Gimbal Camera Stabilizer, 24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plug, incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm.FEATURESLIGHTWEIGHT97 grams = less than a chocolate barCOMPACT63 mm length & 19 mm diameter = small as a pinkyENERGY EFFICIENT250 mAh at 22 V = power consumption lowered by 80 %MOLEX MICROFIT 3.0Molex MicroFit 3.0 6-Pin connector = perfect for Freefly MoVi Pro gimbalLightweight, energy efficient, and versatile: Chrosziel CDM-100M This is the reason why Chrosziel is absolutely committed to designing the CDM-100M consistently for compact dimensions and weight reduction. With a length of 63 mm, a diameter of 19 mm and 97 grams, the Gimbal motor is extremely compact and lightweight. The integrated cable including the Molex MicroFit 3.0 6-pin connector saves additional weight. It can be conveniently connected to the camera stage to control focus, iris and / or zoom via the Freefly MoVi Controller, Freefly Mimic or Freefly Pilot. With a power consumption of only 250 mAh at 24 V the CDM-100M requires at least 80 percent less energy than other commercially available motors. Chrosziel supports operators of gimbal systems that require a special motor for optics in a light setup. This makes it possible to carry gimbal systems for a long time without fatigue and while saving a lot of battery power. IN THE BOX The scope of delivery includes two mod 0.8 gears with 40 and 60 mm diameter and one cable including connector. Also, included is a clamp which ensures a non-slip seat of the motor on 15 and 19 mm diameter rods through a captive reduction mechanism.