Go to homepage
Filter
Accessory bridge 15mm
Accessory bridge 15mm Accessory bridge 15mm w 3/8" and 1/4" insert, double sided clamping
Bridge Plate DigiCine, Ø19mm
Bridge Plate DigiCine, Ø19mm
Bridge Plate DigiCine, Ø19mm Bridge Plate with Ø19mm rods, L= 440mm, for Sony F23, F35, F55, F65, Phantom Flex and with LWS as adaptor for Red Epic / Scarlet, Canon EOS C Series and other
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods Bridge Plate incl. Ø19mm Rods, l. 440mm (for combination with QuickLock Tripod Plates 401-120/401-130 )
Tip
CDM-MK-Z2
CDM-MK-Z2
CDM-MK-Z2 CDM-MK-Z2 - compact control-unit for Fujinon Zoom MK 18-55, 50-135mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. Incl. 1x digital servo-motor-unit, 1x LANC cable, 1x LANC extension cable, 1 x MN-AB (powercable 12 Volt A/B D-Tap 0B 5pin), 1x Allen Key, 1x Mini-USB-adapter.DESIGNED FOR FUJINON MK 18-55MM T2.9 & FUJINON MK 50-135MM T2.9 CONTROLLED VIA SONY FS & LANC HANDGRIP Control directly the zoom servo drive via optically de-coupled LANC sockets and Sony FS5 / FS7 handgrip zoom rocker. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip. CAMERA CONTROL SIGNALS FORWARDED Control signals (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera. SINGLE UNIT MOUNTED ONTO LENS Two captive screws keeping the single servo drive unit permanently fixed onto lens. 4 ZOOM MODES 1st EB / Documentary, 2nd Live / Hardcut, 3rd Silent, 4th Direct Mode
CDM-XK-Z2
CDM-XK-Z2
CDM-XK-Z2 CDM-MK-Z2 - servo drive unit for Fujinon Zoom XK 20-120mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. ZOOM SERVO DRIVE FOR FUJINON XK ZOOM LENS: CDM-XK-Z MOTORIZE YOUR FUJINON XK6X20 20-120MM T3.5 WITH CHROSZIEL SINGLE UNIT MOUNTED ONTO LENSTwo captive screws keeping the single servo drive unit permanently fixed onto lens.CONTROLLED VIA SONY FS & LANC HANDGRIPThe Sony FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip.CAMERA CONTROL SIGNALS FORWARDEDControl signals (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera.4 ZOOM MODESEB / Documentary, Live / Hardcut, Silent, Direct Mode_________________________________________________________________All in one single housing Developed for the Fujinon XK6x20 20-120 mm zoom lens the CDM-XK-Z enables ways of creativity that may be impossible just by zooming manually. To simplify the operator’s workflow the zoom servo drive is directly mounted onto the lens by two captive screws. The weight of the CDM-XK-Z including digital motor, gear, PCB with CPU, screws and cabling is 0.44 lbs. (197 gram). With the zoom servo drive Chrosziel addresses camera operators who are working in the broadcast and documentary sector looking for a reasonably priced zoom servo drive. _____________________________________________________All camera control signals forwarded Control commands (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera via the LANC protocol. By using a Sony PXW-FS5 or a Sony PXW-FS7 camera with a SWIT battery a D-Tap to a (straight or angled) Lemo compatible 5-Pin power cable is used (Chrosziel order numbers: MN-AB-A with angled Lemo compatible socket / MN-AB with straight Lemo compatible socket). The two Jack-Jack cables are forwarding the control commands from the hand grip. If e.g. a Panasonic Varicam, Sony PMW-F5 or Sony PMW-F55 are used a combined cable with power and start / stop is required, like a Hirose 4-Pin to a (straight or angled) Lemo compatible 5-Pin cable (Chrosziel order numbers: F55-A2-PCAM-A with angled Lemo socket / F55-A2-PCAM with straight Lemo compatible socket). Also, the two Jack-Jack cables are forwarding the control commands from the hand grip. Also, Chrosziel offers a variety of power cables with straight and angled plugs for all types of camera power out sockets and batteries including camera run / stop functionality. _____________________________________________________Chrosziel CDM-XK-Z Zoom Servo Motor: zoom modes For freedom of creativity the operator may choose from four different zoom modes: EB / Documentary Mode, Live / Hardcut Mode, Silent, and Direct Mode. EB / Documentary ModeDesigned for long and smooth zoom drives with the CDM-LWZ3-Z it offers slow creeping zoom transitions while keeping the motive perfectly framed.Silent ModeTo reduce the sound of the zoom servo drive the maximum speed of its motor is limited to 40 percent making the setup almost inaudible.Live / Hardcut ModeTo catch the best moments, the Live / Hardcut Mode is useful. It uses 80 percent of the maximum speed capacity of the motor offering fast zoom drives but with Soft Ramping.Direct ModeThe Direct Mode finally uses the full speed capacity of the Zoom Servo Drive. The LANC commands are implemented instantaneously without ramping and smooth transitions. Useful for B camera operators catching snaps shots from the concert.______________________________________________________________How to change zoom modes You can choose the different modes by pressing the zoom rocker for round about 25 seconds, then the green LED flashes very fast while changing the zoom mode and after that it blinks 1, 2, 3 or 4 times* – depends on the zoom mode you chose (* 1 = EB / Documentary / 2 = Silent / 3 = Live / Hard Cut / 4 = Direct). To cycle through these all you need to do is hold the zoom rocker down one way for a couple of seconds to switch to the next mode, and the other way, hold to reverse.
Clamp-On CINE.1 MatteBox MB 565 Double
Clamp-On CINE.1 MatteBox MB 565 Double
Clamp-On CINE.1 MatteBox MB 565 Double The completely modular Cine.1 Matte Box from Chrosziel is built to be strong yet lightweight to fit into your handheld or studio camera rig. Having a matte box on the front of your lens allows you more flexilbility in lighting your scene by blocking light sources just out of frame from directly entering the lens, which can cause the lens to flare, and introduce image artifacts. This particular iteration of the Cine.1 series can be mounted directly on the lens with the integrated clamp, and is configured with two filter stages, however, it can be configured to hold either one or three filters with addition or removal of filter stages.What's in the Box: CINE.1 MatteBox MB 565 Double, for Cine Full Frame camerasClamp adapter with Ø 150mm 501-26French Flag 501-062 Filterholders multiformat 5.65x5.65/ 4x5.650, each independently 360°rotating
Combined Cable CDM Zoom angle 90° Power+on/off F55
Combined Cable CDM Zoom angle 90° Power+on/off F55
Combined Cable CDM Zoom angle 90° Power+on/off F55 Combined Power Cable + camera start/stop f. cameras Sony F55 a. Panasonic Varicam HRS 4pin 12V - Aladin2 / MagNum / CDM-XXX-Z Zoom motor Lemo 0B 5pin angle 90°
DV StudioRig follow focus with gear drive a. FlexiGearRing
DV StudioRig follow focus with gear drive a. FlexiGearRing
DV StudioRig follow focus with gear drive a. FlexiGearRing DV StudioRig follow focus with gear drive 0.8 (206-12 and FlexiGearRing (206-30), scale (205-02), for one-side-operation. For lens diameters up to 110 mm.
DV StudioRig Kit in Case, Follow Focus with all gears
DV StudioRig Kit in Case, Follow Focus with all gears
DV StudioRig Kit in Case, Follow Focus with all gears DV StudioRig plus complete Kit with six gear drives in Case. Consisting of: 206-60S follow focus w. VariLock handwheel, 205-02 scale and gear drives: 206-12, 206-13, 206-14, 206-15, 206-16, 206-17 in Case
DV StudioRig, follow focus
DV StudioRig, follow focus
DV StudioRig, follow focus DV StudioRig, follow focus incl. scale (205-02), for one-side-operation. For lens diameter max. 115 mm measured with gear drive 206-12 (not included). Precise gears with practically no play at a very affordable price. A single lock for rod and extension clamp makes changing of lenses quick. Hand wheel with fine-structured surface for save grip. The scale is easy to change and the reference marking is adjustable for the operator or the assistant. Gear drives and gear rings for the different lenses ensure precise adjustments and can be mounted without tool on both sides of the gear unit
Flexi-Insertring 110:50/85mm for MB450
Flexi-Insertring 110:50/85mm for MB450
Flexi-Insertring 110:50/85mm for MB450 The Chrosziel Flexi-Ring Flexible Step-Down Ring is a 110 to 50-85mm adjustable step-down ring. The ring is designed to provide light protection with the MB-450 matte box series and will fit a variety of wide angle lenses with diameters between 50 and 85mm
Flexi-Insertring 110:75/98mm for MB450 Mattebox
Flexi-Insertring 110:75/98mm for MB450 Mattebox
Flexi-Insertring 110:75/98mm for MB450 Mattebox The Chrosziel Flexi-Ring Flexible Step-Down Ring is a 110 to 75-98mm adjustable step-down ring. The ring is designed to work with the MB-450 matte box series and provide light protection for a variety of wide angle and standard lenses with diameters of 75 to 98mm 
Flexi-Insertring Ø 130 clamp-on
Flexi-Insertring Ø 130 clamp-on
Flexi-Insertring Ø 130 clamp-on Flexi-Insertring for clamp-on-mount Ø 130mm for lens diameter 95 to 125mm. Accessory for MB 456 Academy on rods.
FlexiBellows dia. 130mm, from 110-70 mm
FlexiBellows dia. 130mm, from 110-70 mm
FlexiBellows dia. 130mm, from 110-70 mm FlexiBellows Ring 130, for clamp adapter Ø 130mm, with flexible, rubber bellows with approx. 35 mm travel for lenses with Ø betw. 70 to 110 mm approx., for MB456 and 450W
Focus Drive mod 0.8, Ø46,4mm
Focus Drive mod 0.8, Ø46,4mm
Focus Drive mod 0.8, Ø46,4mm Focus Drive for Cine Style and 35mm Film lenses for Studio Rig, mod 0.8, Ø 46,4mm, w 8 mm (teeth 56)
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm Focus drive (for 206-05S + 206-60S), mod 0.8, for gear rings and Canon and Fujinon cine style lenses, Ø 36.8mm, 44 teeth.
Focus Drive mod 0.8 - Ø 25,6mm
Focus Drive mod 0.8 - Ø 25,6mm
Focus Drive mod 0.8 - Ø 25,6mm Focus Drive for Video prime lenses and Cine Style, for Studio Rig, mod 0.8 - Ø 25,6 mm, w 8mm (teeth 30)
Focus Drive mod 0.8, Ø 36.8mm
Focus Drive mod 0.8, Ø 36.8mm
Focus Drive mod 0.8, Ø 36.8mm Focus Drive for CineStyle, DigiPrime lenses for Studio Rig mod 0.8, Ø36.8mm, width 8 mm, teeth 44
Focus Drive mod 0.8, 46mm
Focus Drive mod 0.8, 46mm
Focus Drive mod 0.8, 46mm Focus drive (DV StudioRig / plus) for DigiPrimes + Movie Lenses, mod 0.8, Ø 46mm, 56 teeth.
Handle Bar proVideo plus
Handle Bar proVideo plus
Handle Bar proVideo plus Handle Bar plus proVideo (w. 220mm), for use with LWS. With clamp forØ 15mm rods
Light Weight Support 15 HD BlackMagic Cinema and Studio
Light Weight Support 15 HD BlackMagic Cinema and Studio
Light Weight Support 15 HD BlackMagic Cinema and Studio LWS - Light Weight Support 15 HD BlackMagic Cinema and Production, with Ø 15 mm rods L. 310 mm w. thread for extensions, double rod guidance and clamp
Light Weight Support 15 HD for DSLR/Mirrorless cameras
Light Weight Support 15 HD for DSLR/Mirrorless cameras
Light Weight Support 15 HD for DSLR/Mirrorless cameras LWS - Light Weight Support 15 HD for DSLR and Mirrorless cameras with anti-twist block, w. Ø 15 mm rods L. 310 mm, double rod guidance and clamps. Adjustable for larger camera bodies by removing spacers. Shorter M5 x 45 mm screws and Allen wrench are included. Compatible for Canon EOS R5/R5 C, 5D, Nikon Z6, Z7, D800, Nikon D90, Panasonic Lumix, S5/S5 MkII, S1H, DMC-GH6, DMC-GH5 mkII, Sony, a7 IV, a7R IV, Black Magic Pocket Cinema 4K, Cinema PRO 6K Cameras
Light Weight Support 15 HD for Sony F3
Light Weight Support 15 HD for Sony F3
Light Weight Support 15 HD for Sony F3 LWS - Light Weight Support 15 HD for Sony F3 camera, w. Ø 15 mm rods L. 310 mm, double rod guidance and clamps. Also for combination with Bridgeplate Cine with Ø 19mm rods (e.g. 401-F235, BP-8).
MagNum on/off LANC
MagNum on/off LANC
MagNum on/off LANC MagNum camera start/stop cable Lemo 0B 9pin - 2,5mm jack for LANC (TM) connection (div. cameras)
This website uses cookies to ensure the best experience possible. More information...