Chrosziel Accessories for the Sony Venice 2!

Chrosziel Accessories for the Sony Venice 2!

Light Weight Support, Bridge Plate, Side Brackets and Top Plates.

Chrosziel Cine Bridge Plate KIT for Sony Venice 2

Chrosziel Cine Bridge Plate KIT for Sony Venice 2 Chrosziel Cine Bridge Plate Kit for Sony Venice 2 consists of: Top Bridge 401-VEN-BRI, Bridge plate 401-121-02, cage brackets left and right, and top plate.

Chrosziel Cine Top Bridge for Sony Venice 2

Chrosziel Cine Top Bridge for Sony Venice 2 Sony Venice 2 Cine Top Bridge with 19mm and 15mm rods for use with Bridge plates.

Chrosziel LWS for Sony Venice 2

Chrosziel LWS for Sony Venice 2 Chrosziel Light weight support for Sony Venice 2 camera, with integrated shoulder pad, 2 rosettes, 401-FS7/5-03 Tripod Adapter Plate, rear rods optional (401-FS7-5R-01)

Chrosziel LWS KIT for Sony Venice 2

Chrosziel LWS KIT for Sony Venice 2 Sony Venice 2 LWS-KIT consists of: Shoulder support 401-VEN, cage brackets left and right, and top plate.

Lensport Iris Motor for cine lenses and Hirose 12pin output cameras

Lensport Iris Motor for cine lenses and Hirose 12pin output cameras Universal Lensport Iris Motor for cine lenses in Broadcast / ENG Run& Gun setups The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-LP-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter.The Chrosziel Lensport Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera.Compatibility: The Universal Iris Motor has been successfully tested with the following cameras (manual and automatic iris control): Sony F5/F55 with LA-FZB1 adapter Sony Venice ARRI Amira Panasonic AK-PLV100 Canon C300/500 with EU-V2 expansion unit Sony E-Mount cameras with Chrosziel MetaMount MA-EPL-HR12 Manual Passive Mode: For temporary manual control, the motor can be set to passive mode. Simply press the motor button once briefly and the motor can be rotated freely. Once the button is pressed again, the motor is back in Active mode and controlled by the camera. Metadata:For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready! FEATURESUniversal Iris motor The Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via any Hirose 12pin camera outputThe camera's Hirose 12pin Lensport output controls directly the Iris motor unit. Remote Iris and AutoIris controlUse the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control.

Top-Plate for Sony Venice 2

Top-Plate for Sony Venice 2 Top-Plate for Sony Venice 2, Ø15mm rod attachment, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm / 3.55inch with internal thread (extendable).401-VEN-TOP: THE CHERRY ON THE SONY Venice 2 “CAKE”The Top Plate comes with rod support in standard optical height, numerous 3/8″ & 1/4″ fastening points with ARRI anti-twist safeguard and an optical marker for attaching a measuring tape. Top-Plate for Sony Venice 2, Ø15mm rod attachment, with integrated mounting points 1/4" and 3/8", pair of Ø15mm rods - 9cm /3.55inch with internal thread (extendable)