Bridge Plate with Ø19mm rods, L= 440mm, for Sony F23, F35, F55, F65, Phantom Flex and with LWS as adaptor for Red Epic / Scarlet, Canon EOS C Series and other
Adjustable Cable Ties With Multiple Mounts.One of the little things that makes life easier on setSet with 12 pcs "Chaos Cable Ties"4x 1/4" thread4x 3/8" thread 4x stickytapeOrganize your cables on your camera set with our Chaos Cable Ties. These adjustable, reusable ties are great for managing cable on set. they also reduce cable strain as they keep the cable from sliding through unlike other ties. The set comes with 4 ties that have a 3/8th thread and 4 that have 1/4-20 thread to attached to cages and organize cables around the camera they way you want. Because of the thread, you can use them again and again. No threaded mount points available? Chrosziel has you covered with 4 adhesive Chaos Cable Ties in the set.
Chrosziel QuickLock VCT Tripod Plate for cameras with V-mount, fully adjustable 3/8" + 1/4" mount threads. Ultra-lightweight made of aircraft-grade aluminium, quiet, low-noise locking mechanism, play-free mounting of the camera by push and pull release/lock lever. (replaces 401-130)FEATRURESSecure, Play-Free Camera MountingLow-Noise Locking Mechanism
For all cameras with V Mount
Play-Free mounting on the Tripod PlateThe QuickLock Plate 401-150 locking mechanism consists of three parts: movable unlocking bolt at the front,fork-shaped locking slide in the middleretractable locking bolt at the rearTo attach a camera with V-mount adapter to the QuickLock Plate, push it into the V-shaped notch on the front and pull the locking lever to the right. The following happens: Unlocking bolt and locking slide move forwards / left, the locking bolt downwards.
Compared to average standard Quick Release Plates or VCT Tripod Plates (mostly without retractable locking bolts), the Chrosziel locking mechanism with retractable locking bolt has play-freely clamps to secure even worn out rear mounting mechanisms located on the bottom of the camera.
For cine cameras equipped only with tripod screw threads at the bottom , a Chrosziel lightweight support (such as 401-EVA1) enables mounting the camera security to the quick release plate. For ENG cameras, rod support can be added via a Chrosziel lightweight support (like 401-50 for Sony) in combination with the QuickLock Plate.
Light weight support (LWS), Cage and handles for Canon EOS C70: LWS with integrated shoulder pad, 2 rosettes, V-Lock-Plate, Tripod Adapter Plate, 2 rods Ø 15mm, length 205mm. Cage with integrated anti-twist mounting points 1/4" and 3/8". Handle with anti-twist connector and additional integrated anti-twist mounting points 1/4" and 3/8".
Chrosziel has expanded the successful CDM Zoom Servo Drive family.
The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-UNI-Z2 fits seamlessly into the operating functions of the Sony cameras of the FX9 / FX6 / FS7 / FS5 series. The servo drive is controlled via the zoom rocker on the handle. The motor control can be addressed via Sony's camera-specific protocol and also works independently of the camera signals when a digital LANC zoom rocker is plugged directly into the servo.Due to the included Chrosziel Flexi toothed ring (#206-30), the Zoomer can be used with almost any zoom lens even without standard cine gearing.
The multi-function handgrip, which in addition to the recording function and a zoom rocker also provide control over the camera menu and other freely selectable functions, are extremely popular on current video cameras with large sensors and are indispensable for effective operation.
The Chrosziel Universal Zoom Servo Drive now allows optimal use of all manual zoom lenses together with the multi-function handgrip. For this purpose, the Zoomer is slid onto a 15mm rod and swiveled onto the zoom lens. Two plug-in cables establish the connection with the camera. One cable is used for the power supply from the camera battery, the second for the connection to the control commands between the handle and the camera. When using a standard LANC zoom rocker or handle with the Sony PXW-FS5, PXW-FS7 and PXW-FS7II, the servo is connected between the handle and the camera via an input and an output jack to receive all zoom control signals. For setup with the Sony PXW-FX9 camera, a Y-cable is used that accepts the Sony multi-connector and connects to both the input jack of the Zoomer and the input jack of the camera.
For the Sony ILME-FX6 camera, a Y-cable is used and connects the 3.5mm connector of the Sony handgrip, input jack of the Universal Zoom Servo Drive, and the Sony camera.
FEATURESUniversal zoom motor
The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod.
Controlled via Sony and Digtial LANC handgrip
The Sony FX6 / FX9 / FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rockers with digital LANC protocol are compatible too, e.g. mounted handgrip.
Camera control signals forwarded
Control commands are immediately looped through to the camera (e.g. menu / user buttons / focus magnification / camera run & stop).
Panasonic DC-BS1H & DC-BGH1 box cameras A recent firmware updated has made the CDM-UNI-Z2 compatible with the Panasonic BS1H and BGH-1 box cinema cameras when used with a Manfrotto MVR901EPLA and MVR901ECLA control handles as well as the digital LANC Libec ZFC-L and ZC-LP zoom controllers. Technical dataPower supply 10-30V (Lemo compatible 0B 5-pin)
2.5mm socket (control command In)
3.5mm socket (control command In&Out)USB Type min A-B (firmware updates)
Torque 0.5Nm
Power consumption max. approx. 350mAh @ 12VIN THE BOX
1x CDM-UNI-Z2 Digital motor unit
1x LANC cable
1x LANC extension cable
1x MN-AB-A90 (power supply cable 12 Volt A/B D-Tap – angled 90° rotated 0B 5pin) 1x 206-30 Flexi Gear Ring (Ø 60-120mm)
1x Gear Drive, mod. 0.8 (Ø 40mm)
1x CAB-FX9 for Sony PXW-FX9 compatibility
1x CAB-FX6 for Sony PXW-FX6 compatibility
USB Mini AdapterSign up for ZOOMER email updatesDon't miss future news about the ZOOMER and subscribe to the Zoomer Email list. Yes, keep me updated about the ZOOMER and send me future news about it.NOTE: we will not use your email for any other emails not related to the Zoomer.
hbspt.forms.create({
region: "na1",
portalId: "2769585",
formId: "aae38178-6132-4e21-b6b4-bd9ac7e2828f"
});
€2,341.00*
This website uses cookies to ensure the best experience possible. More information...