Go to homepage

Arri AMIRA

Arri AMIRA


Filter
Bridge Plate DigiCine, Ø19mm
Bridge Plate DigiCine, Ø19mm
Bridge Plate DigiCine, Ø19mm Bridge Plate with Ø19mm rods, L= 440mm, for Sony F23, F35, F55, F65, Phantom Flex and with LWS as adaptor for Red Epic / Scarlet, Canon EOS C Series and other
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods Bridge Plate incl. Ø19mm Rods, l. 440mm (for combination with QuickLock Tripod Plates 401-120/401-130 )
Chaos Cable Ties
Chaos Cable Ties
Chaos Cable Ties Adjustable Cable Ties With Multiple Mounts.One of the little things that makes life easier on setSet with 12 pcs "Chaos Cable Ties"4x 1/4" thread4x 3/8" thread 4x stickytapeOrganize your cables on your camera set with our Chaos Cable Ties. These adjustable, reusable ties are great for managing cable on set. they also reduce cable strain as they keep the cable from sliding through unlike other ties.  The set comes with 4 ties that have a 3/8th thread and 4 that have 1/4-20 thread to attached to cages and organize cables around the camera they way you want. Because of the thread, you can use them again and again. No threaded mount points available? Chrosziel has you covered with 4 adhesive Chaos Cable Ties in the set. 
Clamp-On CINE.1 MatteBox MB 565 Double
Clamp-On CINE.1 MatteBox MB 565 Double
Clamp-On CINE.1 MatteBox MB 565 Double The completely modular Cine.1 Matte Box from Chrosziel is built to be strong yet lightweight to fit into your handheld or studio camera rig. Having a matte box on the front of your lens allows you more flexilbility in lighting your scene by blocking light sources just out of frame from directly entering the lens, which can cause the lens to flare, and introduce image artifacts. This particular iteration of the Cine.1 series can be mounted directly on the lens with the integrated clamp, and is configured with two filter stages, however, it can be configured to hold either one or three filters with addition or removal of filter stages.What's in the Box: CINE.1 MatteBox MB 565 Double, for Cine Full Frame camerasClamp adapter with Ø 150mm 501-26French Flag 501-062 Filterholders multiformat 5.65x5.65/ 4x5.650, each independently 360°rotating
Flexi-Insertring Ø 130 clamp-on
Flexi-Insertring Ø 130 clamp-on
Flexi-Insertring Ø 130 clamp-on Flexi-Insertring for clamp-on-mount Ø 130mm for lens diameter 95 to 125mm. Accessory for MB 456 Academy on rods.
Focus Drive mod 0.8, Ø46,4mm
Focus Drive mod 0.8, Ø46,4mm
Focus Drive mod 0.8, Ø46,4mm Focus Drive for Cine Style and 35mm Film lenses for Studio Rig, mod 0.8, Ø 46,4mm, w 8 mm (teeth 56)
Focus Drive mod 0.8 - Ø 25,6mm
Focus Drive mod 0.8 - Ø 25,6mm
Focus Drive mod 0.8 - Ø 25,6mm Focus Drive for Video prime lenses and Cine Style, for Studio Rig, mod 0.8 - Ø 25,6 mm, w 8mm (teeth 30)
Focus Drive mod 0.8, Ø 36.8mm
Focus Drive mod 0.8, Ø 36.8mm
Focus Drive mod 0.8, Ø 36.8mm Focus Drive for CineStyle, DigiPrime lenses for Studio Rig mod 0.8, Ø36.8mm, width 8 mm, teeth 44
Lensport Iris Motor for cine lenses and Hirose 12pin output cameras
Lensport Iris Motor for cine lenses and Hirose 12pin output cameras
Lensport Iris Motor for cine lenses and Hirose 12pin output cameras Universal Lensport Iris Motor for cine lenses in Broadcast / ENG Run& Gun setups The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-LP-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter.The Chrosziel Lensport Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera. Compatibility: The Universal Iris Motor has been successfully tested with the following cameras (manual and automatic iris control): ARRI Amira Blackmagic URSA Broadcast G2 & URSA Mini Pro 12K Canon C300/500 with EU-V2 expansion unit Panasonic AK-PLV100 Sony F5/F55 with LA-FZB1 adapter Sony Venice Sony E-Mount cameras with Chrosziel MetaMount MA-EPL-HR12 Manual Passive Mode: For temporary manual control, the motor can be set to passive mode. Simply press the motor button once briefly and the motor can be rotated freely. Once the button is pressed again, the motor is back in Active mode and controlled by the camera. Metadata:For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready! FEATURESUniversal Iris motor The Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via any Hirose 12pin camera outputThe camera's Hirose 12pin Lensport output controls directly the Iris motor unit. Remote Iris and AutoIris controlUse the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control.
Matte Box MB 415, 2 filter stage, 114mm, 15mm rod mount, complete
Matte Box MB 415, 2 filter stage, 114mm, 15mm rod mount, complete
Matte Box MB 415, 2 filter stage, 114mm, 15mm rod mount, complete The MB 415 Compact Wide Angle Matte Box for 15mm Support Systems from Chrosziel includes a double filter stage for filters up to 5.65 x 5.65" and 5 x 6” vertical. Both filters can be moved and fixed in any vertical position, the second filter stage is rotatable 360° or up to 240º (depending on the filter used).For optimum use of the picture angle, the first filter stage is equipped with a multi format filter holder for 4 x 4 and 4 x 5.65” filters, the second stage has a multi format filter holder for 5 x 5 and 4 x 5.65” filters. Using 4 x 5.65” filters in the front stage and 5 x 5" in the second, allows you to make full use of the wide angle format for any position of the rotating stage. For even more flexibility while using graduation filters, insert 5 x 6” filters in the first stage (filter-holder 510-02).A third stage is included inside the rubber bellows for round filters with 138mm of diameter. The MB 415 matte box mounts on 15mm lightweight supports and has a 114mm ring. A 15 inch (39cm) wide, foldable French Flag is included. Side wings (sold separately) can be used optionally. For maximum stray light reduction, use mattes.What's in the Box: Compact MatteBox 4:3 +16:9 F4.5 = CLWAH-F4.5French Flag1x fixed filter Holder multi-format 4x4/4x5.650 (410-31)1x rotatable filter holder multi-format 5x5/4x5.650 (510-01)Bracket for Ø 15mm LWS rodsRet. Ring Ø114mm
MatteBox MB 415 100mm, complete
MatteBox MB 415 100mm, complete
MatteBox MB 415 100mm, complete Compact MatteBox 4:3 +16:9 F4.5 = CLWAH-F4.5 incl. French Flag + CF-MB/F4.8 w. 2 Filterholder 1x fixed multi-format 4x4/4x5.650 (410-31) a. 1x rotatable multi-format 5x5/4x5.650 (510-01), Bracket for Ø 15mm LWS rods, Ret. Ring Ø100mm
MatteBox MB 415 110mm, complete
MatteBox MB 415 110mm, complete
MatteBox MB 415 110mm, complete The Chrosziel MB 415 Wide Angle Matte Box mounts on your 15mm LWS setup to prevent lens flares on lenses as wide as 11mm. The MB 415 features a dual-stage construction, with a rear rotating stage. A 110mm bellows on the back of the matte box mounts to the outside of your lens, and can even accept a circular screw-in filter in addition to the two other stages. A top flag is included for controlling the amount of extra light blockage depending on your setup. Using the 15mm clamp, the MB 415 will mount to a 15mm LWS setup. For 19mm studio setups, an adapter can be purchased separately.What's in the Box:Compact MatteBox 4:3 +16:9 F4.5 = CLWAH-F4.5French Flag1x fixed multi-format 4x4/4x5.650 (410-31)1x rotatable multi-format 5x5/4x5.650 (510-01), Bracket for Ø 15mm LWS rods, Ret. Ring Ø110mm
MatteBox MB 415 95mm, complete
MatteBox MB 415 95mm, complete
MatteBox MB 415 95mm, complete The Chrosziel MB 415 Dual-Stage Wide-Angle 4 x 5.65" Matte Box mount on a 15mm LWS setup to prevent lens flares on lenses as wide as 11mm (in Super 35) for both 16:9 and 4:3 aspect ratios. The MB 415 features a dual-stage construction with a rear rotating stage. A folding top flag is included for controlling the amount of extra light blockage depending on your setup. The 15mm bracket mounts on a 15mm LWS rod setup, and a 19mm adapter can be purchased separately for studio setups. This matte box requires separately available rubber bellows or lens donut.What's in the Box:Compact Matte Box 4:3 +16:9 F4.5 = CLWAH -F4.5French Flag + CF-MB/F4.8  1x fixed filter holder multi-format 4x4/4x5.650 (410-31)1x rotatable filter holder multi-format 5x5/4x5.650 (510-01)Bracket for Ø 15mm LWS rodsRet. Ring Ø95mm (410-14F)
MatteBox MB 450W Super Wide
MatteBox MB 450W Super Wide
MatteBox MB 450W Super Wide MatteBox 450W Super Wide MatteBox  for Wide-Angle lenses, with double-rotating Filter Stages The Chrosziel MB 450W Super Wide Matte Box is a lightweight, yet robust, carbon fiber matte box for professional cinema and video cameras. The "Super Wide" design allows for full frame lenses as wide as 20mm to be used. 1/3"-chip camcorders can use as wide as 2.6mm focal length setting without vignetting. 1/2"-chip camcorders can use down to 3.6mm. Use the included top flag to control glare and reflections for improved contrast and reduced ghosting in the recorded image. Further control can be achieved through separately available side and bottom flags.Both filter stages accept 4x4" and 4x5.65" filters and rotate for use and control of polarizing as well as graduated filters. To use this matte box on your camera, the camera must be mounted on a separately available 15mm LWS baseplate. Fit the matte box on the rods until it covers the lens front. Rod-mounted matte boxes are preferred over clamp-on matte boxes in many production situations as they are always properly aligned with the image horizon.What's In The Box: MB450W MatteBox  French flag (450-11)2 filter holders multiformat 4x4/4x5.650 (410-31), bracket for Ø15mm rodsclamp adapter Ø130mm
MatteBox MB 456 Academy Double
MatteBox MB 456 Academy Double
MatteBox MB 456 Academy Double The Chrosziel Matte Box 456-20 Academy (2 Filter Holders) consists of a 456-R20 matte box, French flag, a filter stage for two individually rotating filter holders, two 4 x 5.65"/5 x 5" filter holders, a 130mm clamp-on rear plate, and a bracket for 15mm lightweight support rods. It is ideal for use with handheld and studio production cameras.The 456-R20 Matte Box offers a wide angle (16:9/4:3) housing for lenses as wide as 12mm (35mm Academy) and eliminates the effects of vignetting. Equipped with a filter stage for two independently rotating 4 x 5.65"/5 x 5" filter holders, the matte box provides sufficient space for adjusting the position of filters.Provided with a French flag, the Matte Box 456-20 Academy controls the angle of light and eliminates lens glare and flare. It can be coupled with optional side wings for accurate light adjustment. The kit includes a 130mm clamp-on rear plate and a bracket for use with 15mm lightweight support rods (optional).With optional bridge plate adapters, you can interface the kit with 15 or 19mm bridge plate rods. An optional swing-away bracket, attached to the back of the matte box housing, allows for quick and efficient lens changes.What's in the Box: Matte Box 456 Academy Double, for full frame cameras, with Double-Rotating Filter StageFrench flag (402-26)2 filter holders multiformat 5x5/4x5.650 (510-01)16:9 (416-03) matte insertBracket for Ø15mm rods and clamp adaptor Ø130mm
Step-down Ring Ø 130:114mm for MB456, MB450 and SD412
Step-down Ring Ø 130:114mm for MB456, MB450 and SD412
Step-down Ring Ø 130:114mm for MB456, MB450 and SD412 Step-down Ring Ø 130:114mm For Chrosziel 450W-20, 456-20 & 456-30 Matte Boxes and SD412 (412-02F130 only) Sunshade, and for Use with Zeiss Compact Prime, Sony PL-Mount Prime & Angenieux Optimo DP Rouge Zoom Lenses
Step-down ring Ø 150:110mm f. MB565
Step-down ring Ø 150:110mm f. MB565
Step-down ring Ø 150:110mm f. MB565 Step-down ring Ø 150:110mm for the MB 565 mattebox 
Step-down Ring Ø150:104mm MB 565
Step-down Ring Ø150:104mm MB 565
Step-down Ring Ø150:104mm MB 565 Step-down Ring Ø 150:104mm for the MB 565 matte box
Step-down Ring Ø150:114mm f.MB 565
Step-down Ring Ø150:114mm f.MB 565
Step-down Ring Ø150:114mm f.MB 565 Step-down Ring Ø 150:114mm for the MB 565 mattebox
Step-down Ring Ø150:130mm f.MB 565
Step-down Ring Ø150:130mm f.MB 565
Step-down Ring Ø150:130mm f.MB 565 Step-down Ring Ø150:130mm for the MB 565 mattebox
Step-down Ring Ø150:134mm MB 565
Step-down Ring Ø150:134mm MB 565
Step-down Ring Ø150:134mm MB 565 Step-down Ring Ø150:134mm MB 565
Step-down Ring Ø150:136mm MB 565
Step-down Ring Ø150:136mm MB 565
Step-down Ring Ø150:136mm MB 565 Step-down Ring Ø 150:136mm f. MB 565
This website uses cookies to ensure the best experience possible. More information...