Go to homepage

Sony PXW-FS5

Sony PXW-FS5


Filter
Adaptor f. PL to Sony E-mount
Adaptor f. PL to Sony E-mount
Adaptor f. PL to Sony E-mount Mechanical adapter for PL lenses on Sony E-mount. Adapted for Sony PXW-FS7 and others as Sony NEX-FS100, Sony NEX-FS700. Support removeable (recommended).
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods
Bridge Plate incl. Ø19mm Rods Bridge Plate incl. Ø19mm Rods, l. 440mm (for combination with QuickLock Tripod Plates 401-120/401-130 )
Tip
CDM-MK-Z2
CDM-MK-Z2
CDM-MK-Z2 CDM-MK-Z2 - compact control-unit for Fujinon Zoom MK 18-55, 50-135mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. Incl. 1x digital servo-motor-unit, 1x LANC cable, 1x LANC extension cable, 1 x MN-AB (powercable 12 Volt A/B D-Tap 0B 5pin), 1x Allen Key, 1x Mini-USB-adapter.DESIGNED FOR FUJINON MK 18-55MM T2.9 & FUJINON MK 50-135MM T2.9 CONTROLLED VIA SONY FS & LANC HANDGRIP Control directly the zoom servo drive via optically de-coupled LANC sockets and Sony FS5 / FS7 handgrip zoom rocker. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip. CAMERA CONTROL SIGNALS FORWARDED Control signals (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera. SINGLE UNIT MOUNTED ONTO LENS Two captive screws keeping the single servo drive unit permanently fixed onto lens. 4 ZOOM MODES 1st EB / Documentary, 2nd Live / Hardcut, 3rd Silent, 4th Direct Mode
CDM-XK-Z2
CDM-XK-Z2
CDM-XK-Z2 CDM-MK-Z2 - servo drive unit for Fujinon Zoom XK 20-120mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. ZOOM SERVO DRIVE FOR FUJINON XK ZOOM LENS: CDM-XK-Z MOTORIZE YOUR FUJINON XK6X20 20-120MM T3.5 WITH CHROSZIEL SINGLE UNIT MOUNTED ONTO LENSTwo captive screws keeping the single servo drive unit permanently fixed onto lens.CONTROLLED VIA SONY FS & LANC HANDGRIPThe Sony FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip.CAMERA CONTROL SIGNALS FORWARDEDControl signals (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera.4 ZOOM MODESEB / Documentary, Live / Hardcut, Silent, Direct Mode_________________________________________________________________All in one single housing Developed for the Fujinon XK6x20 20-120 mm zoom lens the CDM-XK-Z enables ways of creativity that may be impossible just by zooming manually. To simplify the operator’s workflow the zoom servo drive is directly mounted onto the lens by two captive screws. The weight of the CDM-XK-Z including digital motor, gear, PCB with CPU, screws and cabling is 0.44 lbs. (197 gram). With the zoom servo drive Chrosziel addresses camera operators who are working in the broadcast and documentary sector looking for a reasonably priced zoom servo drive. _____________________________________________________All camera control signals forwarded Control commands (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera via the LANC protocol. By using a Sony PXW-FS5 or a Sony PXW-FS7 camera with a SWIT battery a D-Tap to a (straight or angled) Lemo compatible 5-Pin power cable is used (Chrosziel order numbers: MN-AB-A with angled Lemo compatible socket / MN-AB with straight Lemo compatible socket). The two Jack-Jack cables are forwarding the control commands from the hand grip. If e.g. a Panasonic Varicam, Sony PMW-F5 or Sony PMW-F55 are used a combined cable with power and start / stop is required, like a Hirose 4-Pin to a (straight or angled) Lemo compatible 5-Pin cable (Chrosziel order numbers: F55-A2-PCAM-A with angled Lemo socket / F55-A2-PCAM with straight Lemo compatible socket). Also, the two Jack-Jack cables are forwarding the control commands from the hand grip. Also, Chrosziel offers a variety of power cables with straight and angled plugs for all types of camera power out sockets and batteries including camera run / stop functionality. _____________________________________________________Chrosziel CDM-XK-Z Zoom Servo Motor: zoom modes For freedom of creativity the operator may choose from four different zoom modes: EB / Documentary Mode, Live / Hardcut Mode, Silent, and Direct Mode. EB / Documentary ModeDesigned for long and smooth zoom drives with the CDM-LWZ3-Z it offers slow creeping zoom transitions while keeping the motive perfectly framed.Silent ModeTo reduce the sound of the zoom servo drive the maximum speed of its motor is limited to 40 percent making the setup almost inaudible.Live / Hardcut ModeTo catch the best moments, the Live / Hardcut Mode is useful. It uses 80 percent of the maximum speed capacity of the motor offering fast zoom drives but with Soft Ramping.Direct ModeThe Direct Mode finally uses the full speed capacity of the Zoom Servo Drive. The LANC commands are implemented instantaneously without ramping and smooth transitions. Useful for B camera operators catching snaps shots from the concert.______________________________________________________________How to change zoom modes You can choose the different modes by pressing the zoom rocker for round about 25 seconds, then the green LED flashes very fast while changing the zoom mode and after that it blinks 1, 2, 3 or 4 times* – depends on the zoom mode you chose (* 1 = EB / Documentary / 2 = Silent / 3 = Live / Hard Cut / 4 = Direct). To cycle through these all you need to do is hold the zoom rocker down one way for a couple of seconds to switch to the next mode, and the other way, hold to reverse.
DV StudioRig follow focus with gear drive a. FlexiGearRing
DV StudioRig follow focus with gear drive a. FlexiGearRing
DV StudioRig follow focus with gear drive a. FlexiGearRing DV StudioRig follow focus with gear drive 0.8 (206-12 and FlexiGearRing (206-30), scale (205-02), for one-side-operation. For lens diameters up to 110 mm.
DV StudioRig Kit in Case, Follow Focus with all gears
DV StudioRig Kit in Case, Follow Focus with all gears
DV StudioRig Kit in Case, Follow Focus with all gears DV StudioRig plus complete Kit with six gear drives in Case. Consisting of: 206-60S follow focus w. VariLock handwheel, 205-02 scale and gear drives: 206-12, 206-13, 206-14, 206-15, 206-16, 206-17 in Case
DV StudioRig, follow focus
DV StudioRig, follow focus
DV StudioRig, follow focus DV StudioRig, follow focus incl. scale (205-02), for one-side-operation. For lens diameter max. 115 mm measured with gear drive 206-12, not included).
Flexi-Insertring 110:50/85mm
Flexi-Insertring 110:50/85mm
Flexi-Insertring 110:50/85mm Flexi-Insert-Ring, for 110mm screw-in, e.g. MB450. Light protection for lens diameters between 50 and 85 mm.
Flexi-Insertring 110:75/98mm
Flexi-Insertring 110:75/98mm
Flexi-Insertring 110:75/98mm Flexi-Insert-Ring, for 110 mm screw-in, e.g. MB450. Light protection for lens diameters between 75 and 98 mm
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm
Focus Drive for 206-05S + 206-60S mod 0.8, Ø 36,8mm Focus drive (for 206-05S + 206-60S), mod 0.8, for gear rings and Canon and Fujinon cine style lenses, Ø 36.8mm, 44 teeth.
Focus Drive mod 0.8, 46mm
Focus Drive mod 0.8, 46mm
Focus Drive mod 0.8, 46mm Focus drive (DV StudioRig / plus) for DigiPrimes + Movie Lenses, mod 0.8, Ø 46mm, 56 teeth.
Handgrip Extender with bayonet lock for Sony PXW-FS5
Handgrip Extender with bayonet lock for Sony PXW-FS5
Handgrip Extender with bayonet lock for Sony PXW-FS5 Handgrip Extender with bayonet lock for Sony PXW-FS5, extendable from 175 to 250mm, incl. 403-FS5-01 cable with 2,5mm jack connector and socket, length 300mm, Hirth-Rosette with screws. For use with Chrosziel LWS 401-FS5 or directly on the camera with included Hirth-Rosette.The new Chrosziel Handgrip Extender (403-FS5) is the perfect complement for your Sony PXW-FS5 when shooting from the shoulder. With the included Hirth rosette, it quickly and easily mounts either on the Chrosziel Light Weight Support 401-FS5 or directly on the camera. Through the Integrated Bajonet Lock, the camera handgrip mounts at the end of the Handgrip Extender. With Telescopic extension from 175 to 250mm. Delivery scope: Telescopic extension with Bajonet Lock Extension cable with 2,5mm jack connector and socket, length 300mm. Hirth rosette with srews
Kit for Sony PXW-FS5: Lightweight Support, Handgrip Extender
Kit for Sony PXW-FS5: Lightweight Support, Handgrip Extender
Kit for Sony PXW-FS5: Lightweight Support, Handgrip Extender Kit for Sony PXW-FS5 with Light Weight Support and Handgrip Extender: 401-FS5 LWS with extendable Shoulder Pad, 2 Hirth Rosettes, V-Lock Plate, 401-FS7-5-03 Tripod Adapter Plate, 2 rods Ø 15mm, length 205mm. 403-FS5 Handgrip Extender with bayonet lock, incl. extension cable with jack connector, length 300mm, Hirth-Rosette with screws.
Kit for Sony PXW-FS5: Mattebox 450R2, Support, EXT, FF
Kit for Sony PXW-FS5: Mattebox 450R2, Support, EXT, FF
Kit for Sony PXW-FS5: Mattebox 450R2, Support, EXT, FF Kit MB450R2+FollowFocus for Sony PXW-FS5 (and lenses with smaller diameters): 450-R2 MatteBox with french flag (450-11), pivot-mech. for optional side-wings, end plate w. thread Ø114/110mm, 450-20 Flexi-Insertring 110:75/98mm, 401-FS5 LWS w. Ø 15mm rods, l. 205mm, 403-FS5 handgrip extension 206-05S DV StudioRig, 206-12 Gear drive cine mod 0.8, Ø 36,8mm, 206-17 Friction gear Ø34mm
Kit for Sony PXW-FS5: Mattebox 450R2, Support, FollowFocus
Kit for Sony PXW-FS5: Mattebox 450R2, Support, FollowFocus
Kit for Sony PXW-FS5: Mattebox 450R2, Support, FollowFocus Kit MB450R2+FollowFocus for Sony PXW-FS5 (and lenses with smaller diameters): 450-R2 MatteBox with french flag (450-11), pivot-mech. for optional side-wings, end plate w. thread Ø114/110mm, 450-20 Flexi-Insertring 110:75/98mm, 401-FS5 LWS w. Ø 15mm rods, l. 205mm, 206-05S DV StudioRig, 206-12 Gear drive cine mod 0.8, Ø 36,8mm, 206-17 Friction gear Ø34mm
Kit for Sony PXW-FS5: Mattebox 450W, Support, Rings
Kit for Sony PXW-FS5: Mattebox 450W, Support, Rings
Kit for Sony PXW-FS5: Mattebox 450W, Support, Rings Kit MB 450W for Sony PXW-FS5: 450W-20 Super Wide MatteBox, french flag (450-11), 2 rotating filterholders multiformat 4x4/4x5.650 (410-04), bracket f. Ø15mm rods, clamping plate Ø 130mm 411-68 Flexi-Insertring Ø 130 f. Ø 95-125mm, 411-67 Ring 130:110mm (screw-in), 450-20 Flexi-Insertring 110:75/98mm, 401-FS5 LWS w. Ø 15mm rods l. 205mm.
Light Weight Support for Sony PXW-FS5, with shoulder pad
Light Weight Support for Sony PXW-FS5, with shoulder pad
Light Weight Support for Sony PXW-FS5, with shoulder pad Light Weight Support for Sony PXW-FS5, with extensible Shoulder Pad, 2 Hirth Rosettes, V-Lock Plate, 401-FS7-5-03 Tripod Adapter Plate, 2 rods Ø 15mm, length 205mm, (Optional: 401-FS7-5R-01 Rear Rod Clamp).BALANCED ON THE SHOULDER!Sliding and extensible Shoulder Pad.Chrosziel’s Light Weight Support 401-FS5 turns your Sony PXW-FS5 into a perfectly balanced shoulder camera.FEATURESSliding and ergonomic ShoulderPad, extensible for perfect balances on the shoulderHirth rosettes that perfectly combine with the telescopic extensions of Sony PXW-FS7 Handgrip (also fits for Sony PXW-FS5)Light Weight Support safely fixed on the camera base with several screwsRod Clamp for Ø 15mm rods, incl. new captive Clamp LeverIncl. 205mm rods, threaded and extendableOptional Rear Rod Clamp 401-FS7-5R-01 for additional accessories, like batteries or breakout boxesDimensions (with Shoulder Pad): L 210 mm, W 113 mm, H 45 mmWeight, incl. V-Lock Plate, Schoulder Pad and rods: 625g / without rods: 517gV-Mount for Chrosziel QuickLock Plate 401-150, Sony VCT-14 or other quick-release plates (ARRI, Panasonic, etc.)Hirth rosettes that perfectly combine with the telescopic extensions of Sony PXW-FS7 Handgrip (also fits for Sony PXW-FS5) Light Weight Support safely fixed on the camera base with several screws Rod Clamp for Ø 15mm rods, incl. new captive Clamp Levers Incl. 205mm rods, threaded for extensions Retrofit rear Rod Clamp 401-FS7-5R-01 for additional accessories, like batteries or breakout boxesPROVEN COMPATIBILITY!With Chrosziel QuickLock Plate 401-150The V-Lock Plate is mounted under the base plate of the Light Weight Support upon delivery.It reliably fixes the camera onChrosziel’s QuickLock Plate 401-150 Demount it to install the Tripod Adapter Plate with four srews Two Ø 15mm rods, lenght 205mm, slide through along the base platePerfect  with Chrosziel DigiCine Bridge Plate 401-F235The Tripod Adapter Plate 401-FS7-5-03 also serves as adapter for Chrosziel’s DigiCine Bridge Plate 401-F235 and for direct tripod mounting. The Tripod Adapter Plate replaces the V-Lock Plate It quickly and easily mounts with four srews Tripod Adapter Plate included in delivery
MagNum on/off LANC
MagNum on/off LANC
MagNum on/off LANC MagNum camera start/stop cable Lemo 0B 9pin - 2,5mm jack for LANC (TM) connection (div. cameras)
MatteBox 450R2, w. Double-Rotating-Filter Stage, dia.114/110
MatteBox 450R2, w. Double-Rotating-Filter Stage, dia.114/110 MatteBox 450R2, with Double-Rotating-Filter Stage, incl. mask 16:9, french flag (450-11), pivot mechanism for side wings, 2 rotating filterholders 4x4 (402-12) and multiformat 4x4/4x5.650 (410-04), rod clamping for Ø15mm rods, end plate Ø114/110mm
QuickFit Lens support for dia. 15 +19 mm rods
QuickFit Lens support for dia. 15 +19 mm rods
QuickFit Lens support for dia. 15 +19 mm rods Universal 15 + 19mm Lens Support Bracket with 3 support stands, intercombinable, lenght 14, 27 and 35 mm, for lenses w. 1/4" + 3/8" threads. With QuickFit device for Ø15 + 19mm rods.
Rear Rod Clamp for Light Weight Support
Rear Rod Clamp for Light Weight Support
Rear Rod Clamp for Light Weight Support Rear Rod Clamp for Light Weight Support, is ideally suited for 401-FS7, 401 FS5 and 401-C700 Light Weight Support.INCLUDED IN BOX1x Rear Rod Clamp for Light Weight SupportOne Pair of Steel Rods: Diameter: 15mm, Length: 100mm
Universal Lens support, Quick-fit for Ø 15mm rods
Universal Lens support, Quick-fit for Ø 15mm rods
Universal Lens support, Quick-fit for Ø 15mm rods Lens Support Bracket 15 Universal with two support stands with length 14 and 27 mm, combinable for all lenses with 1/4" and 3/8" threads. With QuickFit device for Ø 15mm rods.
ZOOM SERVO DRIVE FOR ZEISS LIGHTWEIGHT ZOOM LWZ3 21-100 MM – VERSION II
ZOOM SERVO DRIVE FOR ZEISS LIGHTWEIGHT ZOOM LWZ3 21-100 MM – VERSION II
ZOOM SERVO DRIVE FOR ZEISS LIGHTWEIGHT ZOOM LWZ3 21-100 MM – VERSION II CDM-LWZ3-Z2 - compact control-unit for Zeiss Zoom LWZ.3 21-100mm for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. Incl. 1x digital servo-motor-unit, 1x LANC cable, 1x LANC extension cable, 1 x MN-AB (powercable 12 Volt A/B D-Tap 0B 5pin), 1x Allen Key, 1x Mini-USB-adapter.ZOOM SERVO DRIVE FOR ZEISS LIGHTWEIGHT ZOOM LWZ3 21-100 MM – VERSION II MOTORIZING YOUR ZEISS LWZ.3 ZOOM LENS WITH CDM-LWZ3-Z2 CONTROLLED VIA SONY FS & LANC HANDGRIP Control directly the zoom servo drive via optically de-coupled LANC sockets and Sony FS5 / FS7 handgrip zoom rocker. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip. CAMERA CONTROL SIGNALS FORWARDED Control commands are immediately looped through to the camera (e.g. menu / user buttons / focus magnification / camera run & stop).SINGLE UNIT MOUNTED ONTO LENS Three captive screws keeping the single servo drive unit permanently fixed onto lens. 4 ENHANCED ZOOM MODES EB / Documentary, Live / Hardcut, Silent, and Direct ModeSingle unit mounted onto lens The CDM-LWZ3-Z2 is designed for the Zeiss Lightweight Zoom LWZ 21-100 mm/T2.9-3.9 T zoom lens (ZEISS LWZ.3). With the Zoom Servo Drive Chrosziel addresses camera operators working in the broadcast, documentary, and related sectors offering a reasonably priced device enabling creative processes that may be impossible while pulling zoom manually. The Zoom Servo Drive adds only indispensable weight to the setup. It contains one digital servo motor, the gear and a PCB with CPU in one single housing. The mounting of the Zoom Servo Drive makes the operator’s workflow comfortable. Just three captive screws are needed to mount it onto the Zeiss Lightweight Zoom (LWZ.3). Sony handgrip / other LANC handgrips with zoom rockers are working, too Zoom Servo Drive CDM-LWZ.3-Z2 with 4 enhanced zoom modes Zeiss Lightweight Zoom LWZ.3 21-100 mm/T2.9-3.9 T zoom lens (ZEISS LWZ.3) Chrosziel Light Weight Support 401-FS5 Controlled via Sony smart grip or any other LANC hand grip Until today, zoom servo drives were operated either by the inbuilt zoom rocker or external zoom devices. A second handgrip controls the camera settings or user commands. Both units are separated from each other and cannot be operated by one single hand. With the CDM-LWZ3-Z2 Chrosziel was able to unify both functionalities into one single unit. Supported are the smart grips of the Sony PXW-FS5 and Sony PXW-FS7 or any LANC compatible zoom rocker. For operation the power cable is connected and the two Jack cables with the handgrip and the camera. Once powered the zoom servo drive calibrates automatically the end stops of the lens. To further support the operator’s piece of mind Chrosziel implemented the so called “Soft Ramping”. Instead of having the zooming suddenly and unexpectedly stop, the zoom gently slows down the movement of the lens at the end stops. By using a LANC device the operator may build his or her setup, like shoulder, Steadicam or Gimbal applications. Thus, the CDM-LWZ3-Z2 makes an all-day companion for the Zeiss Lightweight Zoom LWZ.3 21-100 mm/T2.9-3.9 T zoom lens (ZEISS LWZ.3) and gives the camera operator the freedom of creativity needed. All camera control signals are forwarded Control commands (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera via the LANC protocol. By using a Sony PXW-FS5 or a Sony PXW-FS7 camera with a SWIT battery a D-Tap to a (straight or angled) Lemo compatible 5-Pin power cable is used (Chrosziel order numbers: MN-AB-A with angled Lemo compatible socket / MN-AB with straight Lemo compatible socket). The two Jack-Jack cables are forwarding the control commands from the hand grip. If e.g. a Panasonic Varicam, Sony PMW-F5 or Sony PMW-F55 are used a combined cable with power and start / stop is required, like a Hirose 4-Pin to a (straight or angled) Lemo compatible 5-Pin cable (Chrosziel order numbers: F55-A2-PCAM-A with angled Lemo socket / F55-A2-PCAM with straight Lemo compatible socket). Also, the two Jack-Jack cables are forwarding the control commands from the hand grip. Also, Chrosziel offers a variety of power cables with straight and angled plugs for all types of camera power out sockets and batteries including camera run / stop functionality (see PDF for download). LEMO compatible 0B 5-Pin socket (camera start / stop, power) 2.5 mm Jack port (control command In / Out) 3.5 mm Jack port (control command In / Out) USB type mini A-B (firmware updates) Take four: zoom servo drive zoom modes For freedom of creativity the operator may choose from four different zoom modes: EB / Documentary Mode, Live / Hardcut Mode, Silent, and Direct Mode. EB / Documentary Mode Designed for long and smooth zoom drives with the CDM-LWZ3-Z2 it offers slow creeping zoom transitions while keeping the motive perfectly framed. Silent Mode To reduce the sound of the zoom servo drive the maximum speed of its motor is limited to 40 percent making the setup almost inaudible. Live / Hardcut Mode To catch the best moments, the Live / Hardcut Mode is useful. It uses 80 percent of the maximum speed capacity of the motor offering fast zoom drives but with Soft Ramping. Direct Mode The Direct Mode finally uses the full speed capacity of the Zoom Servo Drive. The LANC commands are implemented instantaneously without ramping and smooth transitions. Useful for B camera operators catching snaps shots from the concert. How to switch zoom modes You can choose the different modes by pressing the zoom rocker for round about 25 seconds, then the green LED flashes very fast while changing the zoom mode and after that it blinks 1, 2, 3 or 4 times* – depends on the zoom mode you chose (* 1 = EB / Documentary / 2 = Silent / 3 = Live / Hard Cut / 4 = Direct). To cycle through these all you need to do is hold the zoom rocker down one way for a couple of seconds to switch to the next mode, and the other way, hold to reverse.
This website uses cookies to ensure the best experience possible. More information...