Sony Studio / Broadcast cameras

Bridge Plate incl. Ø19mm Rods

Bridge Plate incl. Ø19mm Rods Bridge Plate incl. Ø19mm Rods, l. 440mm (for combination with QuickLock Tripod Plates 401-120/401-130 )

Clamp On Matte Box SD 412 Sunshade 104mm, complete

Clamp On Matte Box SD 412 Sunshade 104mm, complete The Chrosziel C-412-02F Wide-Angle Lens Sunshade is a 16:9 / 4:3 104mm clamp-on sunshade designed to work with select wide-angle lenses that feature a focal length down to 16mm in Full Frame or 4.3mm n 2/3 sensor cameras. With a 104mm clamping back, the sunshade reduces glare which helps eliminate lens flares. Two filter stages are included, one 4 x 4" / 4 x 5.65" and the rotating rear stage which accommodates 5 x 5" / 4 x 5.65" filters.Side Wings are available separately for even greater light control. What's in the Box: Compact SunShade 4:3 /16:9 F4.5, with housing CLWAH-F4.5French Flag, Filter Stage CF-SS/F4.52 Filterholder - 1x fixed multi-format 4x4/4x5.650 (410-31) and 1x rotatable multi-format 5x5/4x5.650 (510-01)Clamp Adaptor Ø104 mm

Clamp On Matte Box SD 412 Sunshade 110mm, complete

Clamp On Matte Box SD 412 Sunshade 110mm, complete The Chrosziel 412-02F110 Wide-Angle Lens Sunshade is a 16:9 / 4:3 110mm clamp-on sunshade designed to work with select wide-angle lenses that feature a focal length down to 16mm in Full Frame lenses or 4.3mm in 2/3 sensor lenses. With a 110mm clamping back, the sunshade reduces glare which helps eliminate lens flares. Two filter stages are included, one 4 x 4" / 4 x 5.65" and the rotating rear stage which accommodates 5 x 5" / 4 x 5.65" filters.Side Wings are available separately for even greater lighting control. What's in the Box: Compact SunShade 4:3/16:9 F4.5 = CLWAH-F4.5French Flag + CF-SS/1102 Filter holders 1x fixed multiformat 4x4/4x5.650 (410-31) a. 1x rotatable multi-format 5x5/4x5.650 (510-01)Clamp Adaptor Ø110 mm

Clamp On Matte Box SD 412 Sunshade 130mm, complete

Clamp On Matte Box SD 412 Sunshade 130mm, complete The Chrosziel 412-02F130 Sunshade is a lightweight 16:9/4:3 130mm clamp-on sunshade designed to work with select full frame lenses down to 16mm and 2/3" lenses that have focal lengths down to 4.3mm. The sunshade reduces glare which helps eliminate lens flares. This sunshade includes a top French flag. Side Wings are available as an optional accessory for even greater lighting control. Additionally, the kit includes two filter stages (one fixed, one rotating) with trays that are capable of holding square filters. The front filter stage holds 4 x 5.65" & 4 x 4" filters, and the rear rotating stage holds 5 x 5" and 4 x 5.65" filters.Note: Requires step-down rings – use the 412 series for a 130mm clamping back.What's in the Box: Compact Sunshade 4:3/16:9 F4.5 = CLWAH-F4.5French Flag + CF-SS/1302 Filter holders 1x fixed multiformat 4x4/4x5.650 (410-31) a. 1x rotatable multi-format 5x5/4x5.650 (510-01)Clamp Adaptor Ø130 mm

Focus Drive mod 0.8, Ø46,4mm

Focus Drive mod 0.8, Ø46,4mm Focus Drive for Cine Style and 35mm Film lenses for Studio Rig, mod 0.8, Ø 46,4mm, w 8 mm (teeth 56)

Focus Drive mod 0.8 - Ø 25,6mm

Focus Drive mod 0.8 - Ø 25,6mm Focus Drive for Video prime lenses and Cine Style, for Studio Rig, mod 0.8 - Ø 25,6 mm, w 8mm (teeth 30)

Focus Drive mod 0.8, Ø 36.8mm

Focus Drive mod 0.8, Ø 36.8mm Focus Drive for CineStyle, DigiPrime lenses for Studio Rig mod 0.8, Ø36.8mm, width 8 mm, teeth 44

Lensport Iris Motor for cine lenses and Hirose 12pin output cameras

Lensport Iris Motor for cine lenses and Hirose 12pin output cameras Universal Lensport Iris Motor for cine lenses in Broadcast / ENG Run& Gun setups The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-LP-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter.The Chrosziel Lensport Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera. Compatibility: The Universal Iris Motor has been successfully tested with the following cameras (manual and automatic iris control): ARRI Amira Blackmagic URSA Broadcast G2 & URSA Mini Pro 12K Canon C300/500 with EU-V2 expansion unit Panasonic AK-PLV100 Sony F5/F55 with LA-FZB1 adapter Sony Venice Sony E-Mount cameras with Chrosziel MetaMount MA-EPL-HR12 Manual Passive Mode: For temporary manual control, the motor can be set to passive mode. Simply press the motor button once briefly and the motor can be rotated freely. Once the button is pressed again, the motor is back in Active mode and controlled by the camera. Metadata:For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready! FEATURESUniversal Iris motor The Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. Controlled via any Hirose 12pin camera outputThe camera's Hirose 12pin Lensport output controls directly the Iris motor unit. Remote Iris and AutoIris controlUse the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control.

Matte Box MB 415, 2 filter stage, 114mm, 15mm rod mount, complete

Matte Box MB 415, 2 filter stage, 114mm, 15mm rod mount, complete The MB 415 Compact Wide Angle Matte Box for 15mm Support Systems from Chrosziel includes a double filter stage for filters up to 5.65 x 5.65" and 5 x 6” vertical. Both filters can be moved and fixed in any vertical position, the second filter stage is rotatable 360° or up to 240º (depending on the filter used).For optimum use of the picture angle, the first filter stage is equipped with a multi format filter holder for 4 x 4 and 4 x 5.65” filters, the second stage has a multi format filter holder for 5 x 5 and 4 x 5.65” filters. Using 4 x 5.65” filters in the front stage and 5 x 5" in the second, allows you to make full use of the wide angle format for any position of the rotating stage. For even more flexibility while using graduation filters, insert 5 x 6” filters in the first stage (filter-holder 510-02).A third stage is included inside the rubber bellows for round filters with 138mm of diameter. The MB 415 matte box mounts on 15mm lightweight supports and has a 114mm ring. A 15 inch (39cm) wide, foldable French Flag is included. Side wings (sold separately) can be used optionally. For maximum stray light reduction, use mattes.What's in the Box: Compact MatteBox 4:3 +16:9 F4.5 = CLWAH-F4.5French Flag1x fixed filter Holder multi-format 4x4/4x5.650 (410-31)1x rotatable filter holder multi-format 5x5/4x5.650 (510-01)Bracket for Ø 15mm LWS rodsRet. Ring Ø114mm

MatteBox MB 415 100mm, complete

MatteBox MB 415 100mm, complete Compact MatteBox 4:3 +16:9 F4.5 = CLWAH-F4.5 incl. French Flag + CF-MB/F4.8 w. 2 Filterholder 1x fixed multi-format 4x4/4x5.650 (410-31) a. 1x rotatable multi-format 5x5/4x5.650 (510-01), Bracket for Ø 15mm LWS rods, Ret. Ring Ø100mm

MatteBox MB 415 110mm, complete

MatteBox MB 415 110mm, complete The Chrosziel MB 415 Wide Angle Matte Box mounts on your 15mm LWS setup to prevent lens flares on lenses as wide as 11mm. The MB 415 features a dual-stage construction, with a rear rotating stage. A 110mm bellows on the back of the matte box mounts to the outside of your lens, and can even accept a circular screw-in filter in addition to the two other stages. A top flag is included for controlling the amount of extra light blockage depending on your setup. Using the 15mm clamp, the MB 415 will mount to a 15mm LWS setup. For 19mm studio setups, an adapter can be purchased separately.What's in the Box:Compact MatteBox 4:3 +16:9 F4.5 = CLWAH-F4.5French Flag1x fixed multi-format 4x4/4x5.650 (410-31)1x rotatable multi-format 5x5/4x5.650 (510-01), Bracket for Ø 15mm LWS rods, Ret. Ring Ø110mm

MatteBox MB 415 95mm, complete

MatteBox MB 415 95mm, complete The Chrosziel MB 415 Dual-Stage Wide-Angle 4 x 5.65" Matte Box mount on a 15mm LWS setup to prevent lens flares on lenses as wide as 11mm (in Super 35) for both 16:9 and 4:3 aspect ratios. The MB 415 features a dual-stage construction with a rear rotating stage. A folding top flag is included for controlling the amount of extra light blockage depending on your setup. The 15mm bracket mounts on a 15mm LWS rod setup, and a 19mm adapter can be purchased separately for studio setups. This matte box requires separately available rubber bellows or lens donut.What's in the Box:Compact Matte Box 4:3 +16:9 F4.5 = CLWAH -F4.5French Flag + CF-MB/F4.8 1x fixed filter holder multi-format 4x4/4x5.650 (410-31)1x rotatable filter holder multi-format 5x5/4x5.650 (510-01)Bracket for Ø 15mm LWS rodsRet. Ring Ø95mm (410-14F)