Zoom-Motor Angenieux EZ1-2

Product number: CDM-EZ-Z2

Product number: CDM-EZ-Z2

CDM-EZ-Z2 - compact control-unit for Angenieux EZ-1 and EZ-2 for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7, PXW-FX9) or LANC zoom devices. Incl. 1x digital servo-motor-unit, 1x LANC cable, 1x LANC extension cable, 1x CAB-FX9 Sony Multi cable, 1 x MN-AB-A90 (powercable 12 Volt A/B D-Tap 0B 5pin angled), 1x Allen Key, 1x Mini-USBadapter.


The Zoom Servo Drive 2 is a compact unit consisting of a digital motor and motor control. The Zoom Servo Drive 2 is firmly screwed to a manual cinema zoom lens and allows the zoom function of the popular large sensor cameras to be remotely controlled using the camera's multifunctional handle. This gives cameraman a larger selection of lenses with optimal operation.

The Zoom Servo Drive 2 fits seamlessly into the operating functions of the Sony cameras FS7 / FS5 and FX9 / FX6 series. The Servo Drive 2 is controlled through the zoom rocker on the handle. The motor control can be addressed via the well-known LANC protocol and also works independently of the camera signals if a LANC zoom rocker is plugged directly into the servo.


Internally, the Zoom Servo Drive 2 works with four different modes: documentary mode, silent mode, Live / hard cut mode and direct mode. All modes are optimized for fast or evenly slow focal length adjustment depending on the creative task. When the Servo Drive 2 is screwed to the lens, it calibrates itself to the zoom range of the lens the first time it is switched on and registers the end stops. Each zoom run is smoothly slowed down before the end stop is reached, so that it pleasantly changes into a steady state in the image. This means that the lens is not subjected to much mechanical stress. The power source of the servo is the camera battery. The servo is designed with 10-30V, suitable for use on many different camera models. Cables for the power supply are available for all existent plug connections.



The Zoom Servo Drive 2 is available for each lens model for the following zoom lenses:

  • Angenieux EZ-1 30-90mm und Angenieux EZ-2 15-40mm
  • Fujinon MK 18-55mm and Fujinon MK 50-135mm
  • Fujinon XK 20-120mm
  • Zeiss LWZ.3 21-100mm



Accessories

CDM-xxx-Z angled Power+run/stopp cable Alexa Mini
Combined Power Cable + camera run/stop ARRI Alexa mini (7 pin Lemo comp.) - CDMxxx-Z 5pin Lemo comp. angled (also compatible with MagNum / Aladin MRKII / AL2-INTF)

€224.00*
CDM-xxx-Z angled Power+on/off 24V RS
Combined Power Cable + camera on/off ARRI + Moviecam SL + Sony F35 camera 24 Volt 3 pin Fischer RS - CDM-xxx-Z Lemo comp. 0B 5pin angled (also compatible with MagNum / Aladin MRKII / AL2-INTF)

€224.00*
Combined Cable CDM-XXX-Z angle Power+on/off F55
Combined Power Cable + camera start/stop f. cameras Sony F55 a. Panasonic Varicam HRS 4pin 12V - Aladin2 / MagNum / CDM-XXX-Z Zoom motor Lemo comp. 0B 5pin angled (reduce motor performance, low power!)

€224.00*
Tip
FX9 Y-cable Sony Multi-Jack 3,5mm
Y-cable for Sony FX9 - Sony Multi plug and socket to 3.5mm serial male Jack (90 degree),35cm, only for servo drives version 2

€224.00*
MagNum/AladinMKII/CDM-MK-Z angled Power 12V AB D-Tap
Power Cable 12 Volt A/B D-Tap - CDM-xxx-Z Lemo comp. 0B 5pin angled (also compatible with MagNum / Aladin MRKII / AL2-INTF)

€224.00*
Power Cable CDM-XXX-Z angle Sony
Power cable f. cameras Sony F55, FS7, XDCA, BP-U60T a. Panasonic Varicam HRS 4pin 12V Aladin2 / MagNum / CDM-XXX-Z Zoom motor Lemo comp. 0B 5pin angled (reduce motor performance, low power!)

€224.00*
Sony PXW FX6 Y-cable Sony Jack 3,5mm 4 way
Y-cable for Sony ILME-FX6 - Sony jack / socket 3.5 mm 4 way to 3.5mm serial male Jack (90 degree), 35cm, only for servo drives version 2

€224.00*