1
2
3
4
5
6
1

Ergonomic hand and finger supports
Light weight (577 g)

2

Multifuncional Hand wheel including mechanical end stops and 3 Focus ring types, with infinitely adjustable fluid damping

3

Mechanically adjustable end stops (VariLock).

4

BNC connector for antenna or cable in the MHz range (except MN-101).

5

Includes on the top: 2-pin socket for gooseneck LED lamp / 7-pin socket for power supply and serial communication (except MN-101)

6

5 x 1/4″-screw thread

The Hand Unit

Optimized in cooperation with actual users.

This remote lens control system was ergonomically and functionally optimized in cooperation with actual users. It is offered in three variations: the basic model with one motor channel (MN-101), a two-motor channel version with an upgrade option for a slider, not included with the hand unit (MN-150), as welas the fully equipped 2-motor channel version (MN-200). Additional modules expand the MN-150 or MN-200 with up to two other motor channels, and enhanced broadcast capabilities

Mini

New: The small-sized motor controller

The MagNum Mini – perfectly suited for Gimbal, Handheld, Drone and Steadicam shots!

1
2
1

MagNum motor Controller – can be extended from 1 up to 4 motor channels.

2

The extension module is available in two different Versions:

MN-EXT-MOT-LP for 1 x motor  and 1 x lensport / AL2-EXT-MOT for 2 x motors.

Modular

Modules for up to 4 Motor channels and for Broadcast.

With the concept of extension modules, Chrosziel offers innovation with MagNum. The MagNum Extension Module Motor and Lens Port (MN-EXT-MOT-LP) offers up to 3-motor channels and a camera lens port interface for universal use in Cine and Broadcast applications. The Extension Module Motor (AL2-EXT-MOT) rates the MN-200R on up to 4 motor channels for 3D or Specialty application users.

  • Mounting of the extension module onto the extension Interface of the MN-200R

  • Extension module MN-EXT-MOT-LP with 1x motor channel and 1x camera 12-pin Hirose interface for full broadcast capabilities (video return and talkback switching, Iris RCP control, focus, iris and zoom follow voltage)
  • Extension module AL2-EXT-MOT with two additional sockets for digital encoder motors (2x 7-pin Lemo)

Zoom Rocker

Stepless zooming, contactless mounting.

The Chrosziel Zoom Rocker (MN-ZR) combines mechanical stepless zooming for precise zoom control and contactless signal transmission reducing the risk of water, dust or dirt entering the MagNum Hand Unit.

For maximum protection and best ergonomic use, the Zoom Rocker is mounted on the back of your MagNum Hand Unit MN-150T or MN-200T. The Zoom Rocker is cable free and transmits the zoom signal without power consumption. The zoom speed is set by varying the angle of the rocker. Due to the use of latest CAD-optimized design, the rocker can be operated with one or two fingers. The MagNum Firmware integrates comfort functions like Zoom Speed, Zoom Zap, Software Zoom Limits, Zoom Soft Stop and Zoom Bar.

The Chrosziel Zoom Rocker is compatible with the MagNum Hand Unit MN-150T and MN-200T, manufactured 2016 or newer. Older models of the MagNum Hand Unit MN-150T or MN-200T can be upgraded for compatibility (MN-ZR-UP). The MagNum Hand Unit MN-100T is not compatibel with the Chrosziel Zoom Rocker.

1
2
3
1

Zoom Rocker for stepless zooming, contactless signal transmission.

2

For maximum protection and best ergonomic use, the Zoom Rocker is mounted on the back of your MagNum Hand Unit.

3

For MagNum MN-150T / MN-200T.

2
1

Hand wheel including two mechanical end stops.

2

Interchangeable scale ring (large, small and flat rings available).

Detailed solutions for increased comfort

MagNum MN-150 and MN-200

The hand units MN-150T and MN-200T each offer a handwheel with two variable mechanical stops (VariLock II), infinitely adjustable fluid damping (VariFluid), mechanical locking device and the optional inclusion of scale discs or rings. The standard delivery scope contains a large scale ring.

The MN-200T hand unit additionally offers a contact-less, dust-proof slider bar with variable mechanical stops.

Brand new: Digital Motor CDM-100

The new Digital Lens Motor

With the new Digital Motor CDM-100, Chrosziel developed an extremely light weight, silent, small and horizontally aligned lens motor. It perfectly suites many major photo, broadcast and cine lenses. Der CDM-100 is supplied in the kits for MagNum and Aladin (available from November 2015) and can also be ordered separately.

Our new engine convinces with its features:

  • Perfect for Gimbals, Drones and SteadiCam
  • Horizontally aligned
  • Extremely light weight – 83 g without Gear and pipe clamp, (incl. cabel/plug), 126 g with pipe clamp
  • Extremely silent
  • Very small and short housing
  • Motor housing with standard 19mm diameter
  • Smart gear attachement for secure operation and fast exchange
  • Two gear diameters, Ø 40mm & Ø 60mm with mod 0.8 (other upon request)
  • Fixed motor cable additionally reducing motor size and weight
  • New, Universal Rod Clamp with integrated captive slider – quickly and easily adjustable for use with Ø 15mm or Ø 19mm rods