Lensport Iris Motor for cine lenses and Hirose 12pin output cameras

Product number: CDM-LP-I

Available, delivery time: upon request

Product number: CDM-LP-I

Universal Lensport Iris Motor for cine lenses in Broadcast / ENG Run& Gun setups


The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-LP-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter.

The Chrosziel Lensport Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera.

Compatibility:

The Universal Iris Motor has been successfully tested with the following cameras (manual and automatic iris control):

  • ARRI Amira
  • Blackmagic URSA Broadcast G2 & URSA Mini Pro 12K
  • Canon C300/500 with EU-V2 expansion unit
  • Panasonic AK-PLV100
  • Sony F5/F55 with LA-FZB1 adapter
  • Sony Venice
  • Sony E-Mount cameras with Chrosziel MetaMount MA-EPL-HR12

Manual Passive Mode:

For temporary manual control, the motor can be set to passive mode. Simply press the motor button once briefly and the motor can be rotated freely. Once the button is pressed again, the motor is back in Active mode and controlled by the camera.

Metadata:

For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready!


FEATURES

Universal Iris motor

The Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod.

Controlled via any Hirose 12pin camera output

The camera's Hirose 12pin Lensport output controls directly the Iris motor unit.

Remote Iris and AutoIris control

Use the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control.



Specs


Technical data

  • Standard Lensport communication connector (Hirose 12-pin)
  • 15mm Rod Mounting Bracket 
  • Torque 0.5Nm
  • Power consumption max. approx. 350mAh @ 12V

IN THE BOX

  • 1x CDM-LP-I Digital motor unit
  • 1x Gear Drive, mod. 0.8 (Ø 40mm)
  • 1x Gear Drive, mod. 0.8 (Ø 60mm)

Mechanical accessories

Gear Drive for Chrosziel Digital Motor CDM-100, mod0.5 Ø40mm
Gear Drive for Digital Motor CDM-100, mod. 0.5, Ø 40mm

€135.00*
Gear Drive for Chrosziel Digital Motor CDM-100, mod0.6 Ø40mm
Gear Drive for Digital Motor CDM-100, mod. 0.6, Ø 40mm

€135.00*
Gear Drive large for Chrosziel Motor CDM-100/S, mod.0.8 Ø40
Gear Drive, large 24mm, for Chrosziel Motor CDM-100/S, mod. 0.8, Ø 40mm

€135.00*
Gear Drive for Chrosziel Motor CDM-100/S/M, mod.0.8 Ø30
Gear Drive for Chrosziel Motor CDM-100/S/M, mod. 0.8, Ø 30mm

€135.00*
Gear Drive for Chrosziel Motor CDM-100/S/M, mod.0.8 Ø24
Gear Drive for Chrosziel Motor CDM-100/S/M, mod. 0.8, Ø 24mm

€135.00*
Gear Drive for Chrosziel Motor CDM-100/S/M, mod.0.8 Ø50
Gear Drive for Chrosziel Motor CDM-100/S/M, mod. 0.8, Ø 50mm

€135.00*
Universal Rod Clamp for Ø 15 and 19mm Rods
Universal Rod Clamp for Ø 15 and 19mm Rods due to integrated slider, with captive clamp lever

€252.00*
Extention Unit Ø 15:15mm, short
Extention Unit Ø 15:15mm, with short rod Ø 15mm

€96.00*
Extention Unit Ø 15:15mm L82mm
Extention Unit Ø 15:15mm (distance 82mm) with short rod Ø 15mm

€96.00*

Similar products

Digital Chrosziel Motor CDM-100
CDM-100 Chrosziel's Digital Motor, 24V operating voltage, with cable 800mm length and Lemo 7-Pin 1B standard connector.With the Digital Motor CDM-100, we developed an extremely light weight, silent, small and horizontally aligned lens motor. It perfectly suites Gimbal, Drone and SteadiCam applications.FEATURESPerfect for Gimbals, Drones and SteadiCam Horizontally aligned Extremely light weight Extremely silent Very small and short housing Motor housing with standard 19mm diameter Smart gear attachement for secure operation and fast exchange Two gear diameters (40 and 60mm), even for large lens pitches Fixed motor cable additionally reducing motor size and weight New, Universal Rod Clamp with integrated captive slider – quickly and easily adjustable for use with Ø 15mm or Ø 19mm rodsTechnical detailsDimensions: L 63 mm, max. Diameter 25 mm (without gear) Weight (without clamp): 97g without gear, ca. 110g with small gear Voltage: max. 24V Cable length: 70cm Connector Lemo 1B 7-Pin Two gears: Ø 40mm & Ø 60mm with mod 0.8 Gear Diameter Ø 40mm with mod 0.5 (CDM-D40-M05) or 0.6 (CDM-D40-M06) additionally available 15mm / 19mm Universal Rod Clamp Compatibility Chrosziel Digital Motor CDM-100 compatible with: Chrosziel MagNum, Chrosziel Aladin MK II and 3rd party brands Chrosziel Digital Motor CDM-100S compatible with: Chrosziel MagNum mini, Freefly Movi and othersIn the BoxEU15-19 Universal Rod Clamp for Ø 15/19mm CDM-D40 Gear Drivemod. 0.8, Ø 40mmCDM-D60 Gear Drivemod. 0.8, Ø 60mm

€1,154.00*
Digital Motor CDM-100M for Freefly MoVI Pro & MoVi XL Gimbal
CDM-100M Lens Motor Freefly MoVi Pro & MoVi XL GimbalPerfect for (focus, iris, zoom) lens controlDigital Motor CDM-100M with connector for Freefly MoVI Pro  & MoVi XL Gimbal Camera Stabilizer, 24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plug, incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm.FEATURESLIGHTWEIGHT97 grams = less than a chocolate barCOMPACT63 mm length & 19 mm diameter = small as a pinkyENERGY EFFICIENT250 mAh at 22 V = power consumption lowered by 80 %MOLEX MICROFIT 3.0Molex MicroFit 3.0 6-Pin connector = perfect for Freefly MoVi Pro gimbalLightweight, energy efficient, and versatile: Chrosziel CDM-100M This is the reason why Chrosziel is absolutely committed to designing the CDM-100M consistently for compact dimensions and weight reduction. With a length of 63 mm, a diameter of 19 mm and 97 grams, the Gimbal motor is extremely compact and lightweight. The integrated cable including the Molex MicroFit 3.0 6-pin connector saves additional weight. It can be conveniently connected to the camera stage to control focus, iris and / or zoom via the Freefly MoVi Controller, Freefly Mimic or Freefly Pilot. With a power consumption of only 250 mAh at 24 V the CDM-100M requires at least 80 percent less energy than other commercially available motors. Chrosziel supports operators of gimbal systems that require a special motor for optics in a light setup. This makes it possible to carry gimbal systems for a long time without fatigue and while saving a lot of battery power. IN THE BOX The scope of delivery includes two mod 0.8 gears with 40 and 60 mm diameter and one cable including connector. Also, included is a clamp which ensures a non-slip seat of the motor on 15 and 19 mm diameter rods through a captive reduction mechanism.

€1,154.00*
Digital Motor KIT CDM-100M FIZ for Freefly MoVI Pro Gimbal & MoVi XL
Kit Digital Motor FIZ for Freefly MoVI Pro & MoVi XL with 3x CDM-100M, each CDM-100M with connector for Freefly MoVI Pro & MoVi XL Gimbal Camera Stabilizer, 24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plug, incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm.CDM-100M LENS MOTOR FREEFLY MOVI PRO & MoVi XL GIMBAL Perfect for (focus, iris, zoom) lens control Digital Motor CDM-100M with connector for Freefly MoVI Pro & MoVi XL Gimbal Camera Stabilizer, 24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plug, incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm. FEATURESLIGHTWEIGHT 97 grams = less than a chocolate barCOMPACT63 mm length & 19 mm diameter = small as a pinkyENERGY EFFICIENT250 mAh at 22 V = power consumption lowered by 80 %MOLEX MICROFIT 3.0Molex MicroFit 3.0 6-Pin connector = perfect for Freefly MoVi Pro gimbalLIGHTWEIGHT, ENERGY EFFICIENT, AND VERSATILE: CHROSZIEL CDM-100M This is the reason why Chrosziel is absolutely committed to designing the CDM-100M consistently for compact dimensions and weight reduction. With a length of 63 mm, a diameter of 19 mm and 97 grams, the Gimbal motor is extremely compact and lightweight. The integrated cable including the Molex MicroFit 3.0 6-pin connector saves additional weight. It can be conveniently connected to the camera stage to control focus, iris and / or zoom via the Freefly MoVi Controller, Freefly Mimic or Freefly Pilot. With a power consumption of only 250 mAh at 24 V the CDM-100M requires at least 80 percent less energy than other commercially available motors. Chrosziel supports operators of gimbal systems that require a special motor for optics in a light setup. This makes it possible to carry gimbal systems for a long time without fatigue and while saving a lot of battery power. In the Box:3x CDM-100M Digital Motor FIZ for Freefly MoVI Pro, each CDM-100M with connector for Freefly MoVI Pro Gimbal Camera Stabilizer24V operating voltage, with cable 400mm length and Molex Micro-Fit 3 6pin connector plugEU15-19 Universal Rod Clamp for Ø 15/19mmCDM-D40 Gear Drive, mod. 0.8, Ø 40mmCDM-D60 Gear Drive, mod. 0.8, Ø 60mm

€3,288.00*
Digital Chrosziel Motor CDM-100S with small Lemo connector
CDM-100S - Chrosziel's Digital Motor with small Lemo 7-Pin 0B connector, nominal operating voltage 24V, cable 700mm,incl.: EU15-19 Universal Rod Clamp for Ø 15/19mm, CDM-D40 Gear Drive, mod. 0.8, Ø 40mm, CDM-D60 Gear Drive, mod. 0.8, Ø 60mm, Aswell for use with Freefly Movi and others.FEATURES Digital Motor CDM-100 Perfect for Gimbals, Drones and SteadiCams Horizontally aligned Extremely light weight Very small and short housing Motor Housing with Standard 19mm Diameter Smart gear attachement for secure operation and fast exchange Two gear diameters, even for large lens pitches Fixed motor cable additionally reducing motor size and weight Universal rod clamp with captive slider for Ø 15mm / 19mm rods Technical details: Dimensions: L 63 mm, max. Diameter 25 mm (without gear) Weight (without clamp): 97g without gear, ca. 110g with small gear Voltage: max. 24V Cable length: 70cm Connector Lemo 1B 7-Pin Two gears: Ø 40mm & Ø 60mm with mod 0.8 Gear Diameter Ø 40mm with mod 0.5 (CDM-D40-M05) or 0.6 (CDM-D40-M06) additionally available 15mm / 19mm Universal Rod ClampCompatibility Chrosziel Digital Motor CDM-100 compatible with:  Chrosziel MagNum, Chrosziel Aladin MK II and 3rd party brandsChrosziel Digital Motor CDM-100S compatible with: Chrosziel MagNum mini, Freefly Movi and othersIn the BoxCDM-100S with small Lemo 7-Pin 0B connectorCable 700mmEU15-19 Universal Rod Clamp for Ø 15/19mmCDM-D40 Gear Drive, mod. 0.8, Ø 40mmCDM-D60 Gear Drive, mod. 0.8, Ø 60mm

€1,154.00*
MagNum KIT Broadcast with Chrosziel motors
MagNum  KIT Broadcast for focus, iris, zoom, with Chrosziel motors. Compatible also with wired analogue focus a. zoom demands. Scope of delivery: MN-200R-01 Motor controller, MN-EXT- MOT-LP Ext. Interface f. 3rd motor, AL2-INTF-LP cable, 3 CDM-100 Chrosziel Motors, MN-XLR4  XLR 4pin power cable, MN-RMB1 Bracket f. receiver, MN-RMB2 Accessorie bridge 15/19mm rods, Manual, in hard case (MN-CASE)

€9,341.00*
MagNum KIT Broadcast with Hedén motors
MagNum KIT Broadcast for focus, iris, zoom, with Hedén motors. Compatible also withwired analogue zoom / focus demands. Incl.:MN-200R-01 Receiver/Motor Controller,M26VE 3 Hedén Motors,MN-EXT-MOT-LP Ext. Interface f. 3rd motor,AL2-INTF-LP Connection cable,MOTD60 3 Motor cables 60cm,MN-XLR4 XLR 4pin Power cable,MN-RMB1 Mounting bracket f. receiver,MN-RMB2 Accessory bridge f. cold shoe and f. 15/19mm rods,MN-CASE hard case, manual.

€12,900.00*